Copyright © Philip M. Parker, INSEAD. Terms of Use.

Definition: Crossover |
CrossoverNoun1. The interchange of sections between pairing homologous chromosomes during the prophase of meiosis. Source: WordNet 1.7.1 Copyright © 2001 by Princeton University. All rights reserved. |
Date "crossover" was first used in popular English literature: sometime before 1905. (references) |
| Domain | Definition |
Building & Civil Engineering | Two turnouts, with track between them, connecting two nearby and usually parallel tracks. Source: European Union. (references) |
| Pedestrian or vehicular links, crossing above or below a transport system. Source: European Union. (references) | |
Electrical Engineering | A region in an integrated circuit in which a metallised conducting path crosses over another conducting path, from which it is insulated. Insulation is being provided by a dielectric layer. Source: European Union. (references) |
| The first point of convergence of an electron beam. Source: European Union. (references) | |
Medicine | The exchange of genetic material during cellular replication involving the breakage and reunion of DNA, thus giving rise to recombination. Source: European Union. (references) |
Mining | A track device that permits rail traffic to cross over another track which heads in a different direction on the same level. Signal lights areactivated to avoid collision on the crossover. (references) |
Physics | Crossover is the plane of the minimal diameter of the beam. Source: European Union. (references) |
Statistics | The exchange of material between two paired classifiers. Source: European Union. (references) |
Source: compiled by the editor from various references; see credits. | |
(From Wikipedia, the free Encyclopedia)
This article attempts to characterize Western classical music, particularly in comparison with other forms of music popular in Western societies. Further information on classical music can be found in the cross references given below. For articles on the classical music of other cultures, see classical music (disambiguation)
The nature of classical music
In a Western context, "classical music" is a somewhat imprecise term, but there are a number of ways that classical music is identified.First, classical music is a written musical tradition, preserved in music notation, as opposed to being transmitted in recordings or as folklore. While differences between particular peformances of a classical work are recognized, a work of classical music is generally held to transcend any particular performance thereof. Works that are centuries old can be, and often are, performed far more often than works recently composed. The use of notation is an effective method for classical music because all active participants in the classical music tradition are able to read music. Normally, this ability comes from formal training, which usually begins with learning to play an instrument, and sometimes continues with instruction in music theory and composition. However, there are many passive participants in classical music who enjoy it without being able to read it or perform it.
Another important characteristic of classical music is that it is felt by many to represent a form of "high" culture. Particular works of classical music are often venerated, even to extremes--thus, for instance, the 18th century writer E. T. A. Hoffmann loved Wolfgang Amadeus Mozart's music so much that he changed his middle name to Amadeus. Performances of classical music take place in a relatively solemn atmosphere, with the audience maintaining (ideally) silence during the performance, so that everyone can hear each note and nuance. The performers usually dress formally, a practice which is often taken as a gesture of respect for the music, and performers normally do not engage in casual banter or other direct involvement with the audience.
The other side of concept of "high culture", of course, is snobbery, and participation in classical music has for centuries been, for some, the result of a desire for prestige.
Because classical music represents high culture, parents over the last several centuries have often made sure that their children receive classical music training. They are often motivated by a belief that such training will permit their children to lead richer, fuller lives; or by a belief that such training instills a useful sense of self-discipline.
Written transmission, along with the veneration bestowed on classical works, has important implications for the performance of classical music. To a fair degree, performers are expected to perform a work in a way that realizes the original intentions of the composer, which are often stated quite explicitly (down to the level of small, note-by-note details) in the musical score. Indeed, deviations from the composer's intentions are sometimes condemned as outright ethical lapses. Yet the opposite trend--admiration of performers for new "interpretations" of the composer's work, can be seen, and it is not unknown for a composer to praise a performer for achieving a better realization of the composer's original intent than the composer was able to imagine. Thus, classical music performers often achieve very high reputations for their musicianship, even if they do not compose themselves.
Another consequence of the veneration of the composer's written score is that improvisation plays a relatively minor role in classical music--in sharp contrast to traditions like jazz, where improvisation is central. Improvisation in classical music performance was far more common during the Baroque era, and recently the performance of such music by modern classical musicians has been enriched by a revival of the old improvisational practices. During the Classical period, Mozart and Beethoven sometimes improvised the cadenzas to their piano concertos--but tended to write out the cadenzas when other soloists were to perform them.
Art music and concert music are terms sometimes used as synonyms of classical music.
Classical music as "music of the classical era"
See main article: Classical music eraIn music history, a different meaning of the term classical music is often used: it designates music from a period in musical history covering approximately Haydn to Beethoven -- roughly, 1750-1800. When used in this sense, the initial C of Classical music is sometimes capitalized to avoid confusion.
Classical music and popular music
The relationship (particularly, the relative value) of classical music and popular music is a controversial question. Some partisans of classical music may claim that classical music constitutes art and popular music only light entertainment. However, many popular works show a high level of artistry and musical innovation and many classical works are unabashedly crowd-pleasing.It might be argued that, at least on the average, classical works have greater musical complexity. In particular, classical music usually involves more modulation (changing of keys), less outright repetition, and a wider use of musical phrases that are not default length--that is, four or eight bars long (however, much minimalist music goes against these tendencies). Also, it is normally only in classical music that long works (30 minutes to three hours) are built up hierarchically from smaller units (usually called movements).
This not to say that popular music is always simpler than classical. Both jazz and rap make use of rhythms more complex than would appear in the average classical work, and popular music sometimes uses certain complex chordss that would be quite unusual in a classical music.
Classical and popular music are distinguished to some extent by their choice of instruments. For the most part, the instruments used in classical music are nonelectrical and were invented prior to the mid-1800's (often, much earlier). They consist of the instruments found in an orchestra, together with a few other solo instruments (piano, harpsichord, organ). The electric guitar plays an extremely prominent role in popular music, but plays almost no role in classical music, even classical music of the 20th and 21st centuries. Both classical and popular musicians have experimented for the last several decades with electrical or electronic instruments (for instance, the synthesizer), and instruments from other cultures (such as the gamelan).
One last difference between classical and popular music is worth observing. New performers entering the field of popular music are expected, virtually without exception, to be young and sexually attractive. Older performers are sometimes successful, but typically their following consists largely of fans who encountered them when they were young. In the case of classical music, it is likewise a professional advantage for beginning performers to be attractive, but there is no rigid requirement in this regard. Older performers continue to attract new listeners, and indeed, artists such as Vladimir Horowitz and Artur Rubinstein performed before enthusiastic audiences in advanced old age. Further, a number of opera singers attract enthusiastic followings despite being quite stout or even obese.
A phenomenon that arose in the last century is "cross-over"--the popularity, usually temporary, of certain classical works among people who ordinarily do not listen to classical music. Often this is due to the appearance of a classical work in a filmscore. Some classical works that achieved crossover status in the twentieth century include the Canon in D by Johann Pachelbel, the Symphony No. 3 by Henryk Górecki, Joseph Haydn's Trumpet Concerto (popularized by the trumpeter Wynton Marsalis), and the second movement of Mozart's Piano Concerto, K. 457 (from its appearance in a 1967 film entitled Elvira Madigan). Even atonal music, which tends to be less popular among classical enthusiasts, has a strong niche in popular culture, since (as Charles Rosen has noted) it is widely used in film and television scores "to depict an approaching menace".
An interesting speculation is whether works of popular music are likely to achieve the kind of permanence that works of classical music have achieved. Prior to the advent of audio recordings, this was not a possibility, since popular works are generally identified with the performance of the artist who created them. However, since high-quality audio recordings have now existed for over fifty years, the possibility of popular works achieving some kind of permanent, enshrined, status now presents itself, and is probably happening now in the case of the most outstanding artists.
Periods of classical music
- Early music
- Medieval European music
- Renaissance music
- Baroque music
- Classical music era
- Romantic music
- Impressionist music
- Expressionist music
- Nationalist music
- Modern classical music
- Contemporary music
Other genres of classical music
- Film music
- Electronic art music
Composers of classical music
- List of classical music composers
Terms of classical music
- Polyphony
- Tonality
- Atonality
- Musical tuning
- Counterpoint
- Timbre
- Melody
- Harmony
- Rhythm
- Musical form
- Musical Interpretation
- Musical voices
- Musical color
- Tone Row
Source: adapted by the editor from Wikipedia, the free encyclopedia under a copyleft GNU Free Documentation License (GFDL) from the article "Classical music."
(From Wikipedia, the free Encyclopedia)
Crossover is the process by which two chromosomes paired up during prophase I of meiosis exchange a distal portion of their DNA. Crossover occurs when two chromosomes, normally two homologous instances of the same chromosome, break and connect to each other's ends. If they break at the same locus, this merely results in an exchange of genes. This is the normal way in which crossover occurs. If they break at different loci, the result is a duplication of genes on one chromosome and a deletion on the other. If they break on opposite sides of the centromere, this results in one chromosome being lost during cell division.Any pair of homologous chromosomes may be expected to cross over three or four times during meiosis. This aids evolution by increasing independent assortment, and reducing the genetic linkage between genes on the same chromosome. For audio crossovers see electronic filters.
Source: adapted by the editor from Wikipedia, the free encyclopedia under a copyleft GNU Free Documentation License (GFDL) from the article "Crossover."
(From Wikipedia, the free Encyclopedia)
An electronic filter eliminates unwanted frequencies from an electronic signal.A low-pass filter passes low frequencies. A high-pass filter passes high frequencies. A band-pass filter passes a limited range of frequencies. A band-stop filter passes all frequencies except a limited range. A notch filter is a type of band-stop filter that acts on a particularly narrow range of frequencies.
Band-stop and band-pass filters can be constructed by combining low-pass and high-pass filters.
A popular form of 2 pole filter is the Sallen-Key type. This is able to provide low-pass, band-pass, and high pass versions.
Passive Filters
The simplest electronic filters are based on combinations of resistors, inductors and capacitors. Since resistance has the symbol R, inductance the symbol L and capacitance the symbol C, these filters exist in so-called RC, RL, LC and LCR varieties. All these types are collectively known as passive filters, because they are activated by the power in the signal and not by an external power supply.
Here's how passive filters work: inductors block high-frequency signals and conduct low-frequency signals, while capacitors do the reverse. A filter in which the signal passes through an inductor, or in which a capacitor provides a path to earth, therefore transmits low-frequency signals more strongly than high-frequency signals and is a low-pass filter. If the signal passes through a capacitor, or has a path to ground through an inductor, then the filter transmits high-frequency signals more strongly than low-frequency signals and is a high-pass filter. Resistors on their own have no frequency-selective properties, but are added to inductors and capacitors to determine the time-constants of the circuit, and therefore the frequencies to which it responds.
At very high frequencies (above about 100 megahertz), sometimes the inductors consist of single loops or strips of sheet metal, and the capacitors consist of adjacent strips of metal.
Other components can be added to LC filters to make them more precise.
Filters are measured by their quality or "Q" factor. A filter is said to have a high Q if it selects or rejects a narrow range of frequencies compared with the absolute frequency at which it operates. Quality can be measured by the precision of a harmonic oscillator implemented with that type of device.
Active Filters
Filters can also be implemented using a combination of passive components and amplifiers to create active filters. These can have high Q, and achieve resonance without the use of inductors. However, their upper frequency limit is lower than that of a passive filter. Further detail is available in the digital filter section.
Other filters
In the late 1930s, engineers realized that small mechanical systems made of rigid materials such as quartz would acoustically resonate at radio frequencies, i.e. from audible frequencies (sound) up to several hundred megahertz.
Some early resonators were made of steel, but quartz quickly became favored. The biggest advantage of quartz is that it is piezoelectric. This means that quartz resonators can directly convert their own mechanical motion into electrical signals. Quartz also has a very low coefficient of thermal expansion. This means that quartz resonators produce stable frequencies over a wide temperature range.
Quartz crystal filters have much higher quality factors than LCR filters. When higher stabilities are required, the crystals and their driving circuits may be mounted in a "crystal oven" to control the temperature. For very narrow filters, sometimes several crystals are operated in series.
Engineers realized that a large number of crystals could be collapsed into a single component, by mounting comb-shaped evaporations of metal on a quartz crystal. In this scheme, a "tapped delay line" reinforces the desired frequencies as the sound waves flow across the surface of the quartz crystal.
The tapped delay line has become a general scheme of making high-Q filters in many different ways.
Lately, for lower frequencies, digital signal processing has been able to inexpensively construct very high Q filters. In this scheme, a computer program simulates a tapped delay line. An analog to digital converter turns the signal into a stream of numbers. The computer program stores the numbers in a list in the computer's memory. Then, the program selects numbers from this list, at a spacing that simulates the comb of a tapped delay line. These numbers are multiplied by constants, and added together to make the output of the filter. The filter's output becomes a signal by passing it through a digital to analog converter. There are problems with noise introduced by the conversions, but these can be controlled and limited for many useful filters. Digital signal processing is especially useful for audio.
Another method of filtering, at frequencies from 800 megahertz to about 5 gigahertz, is to use a synthetic single-crystal garnet sphere made of a chemical combination of titanium, iron and nitrogen. The garnet sits on a strip of metal driven by a transistor, and a small loop antenna touches the top of the sphere. An electromagnet changes the frequency that the garnet will pass. The advantage of this method is that the garnet can be tuned over a very wide frequency by varying the strength of the magnetic field.
For even higher frequencies and greater precision, the electrons of atoms must be used. Atomic clocks use cesium masers as ultra-high Q filters to stabilize their primary oscillators. Another method, used at high, fixed frequencies with very weak radio signals, is to use a ruby maser tapped delay line.
Source: adapted by the editor from Wikipedia, the free encyclopedia under a copyleft GNU Free Documentation License (GFDL) from the article "Electronic filter."
Synonym: CrossoverSynonym: crossing over (n). (additional references) |
Crosswords: Crossover |
| Specialty definitions using "crossover": evolutionary programming ♦ genetic algorithm, genetic programming ♦ O'Rourke car switcher. (references) |
| Non-English Usage: "Crossover" is also a word in the following language with the English translation in parentheses. Portuguese (crossover). |
| Domain | Usage | |
Lyrics | From here we could crossover like Hardaway (If I Could Go; performing artist: Angie Martinez) Little with the ill crossover (Bow Wow [That's My Name]; performing artist: Lil Bow Wow) | |
Movie/TV Titles | Crossover (1989) | |
Source: compiled by the editor from various references; see credits. | ||
| Domain | Title | ||
Books | |||
Music |
| ||
High Tech |
| ||
Source: compiled by the editor from various references; see credits. | |||
| Thumbnail | Description & Credit | ![]() | Craig, Kansas. Track crossover. For twelve and one half miles west of Argentine, the track reversal system is used. Credit: Library of Congress. |
Source: pictures compiled by the editor from various references; see picture credits. | |||
![]() |
| "Unfinished highway" by Paul Fris Commentary: "Highway crossover at pernis." |
Source: photographs selected by the editor, with permission from the photographers. |
| Subject | Topic | Quote |
Health | On a statistical basis, the numbers of individuals showing signs of both diseases is surprisingly high. Because of this crossover of anatomical and physical signs, some clinicians have suggested that AD and PD are the same disease occurring over a broad spectrum. (references) | |
Economic History | Netherlands | The Netherlands is home to many industries where there is a significant crossover of products and technology. (references) |
Source: compiled by the editor from ICON Group International, Inc.; see credits. | ||
| "Crossover" is generally used as a noun (singular) -- approximately 97.14% of the time. "Crossover" is used about 105 times out of a sample of 100 million words spoken or written in English. Its rank is based on over 700,000 words used in the English language. Some parts-of-speech are not covered due to the samples used by the British National Corpus. (note: percents less than one-hundredth of one percent have been omitted) |
| Parts of Speech | Percent | Usage per 100 Million Words | Rank in English |
| Noun (singular) | 97.14% | 102 | 32,309 |
| Lexical Verb (base form) | 1.9% | 2 | 245,945 |
| Lexical Verb (infinitive) | 0.95% | 1 | 339,140 |
| Total | 100.00% | 105 | N/A |
Source: compiled by the editor from several corpora; see credits.
Expressions using "crossover": crossover point ♦ crossover vote ♦ crossover voter ♦ junction crossover. Additional references. | |
| Hypenated Usage | |
Ending with "crossover": club-crossover, country-crossover. | |
| Source: compiled by the editor from various references; see credits. | |
| The following statistics estimate the number of searches per day across the major English-language search engines as identified by various trade publications. Hyperlinks lead to commercial use of the expression at Amazon.com. |
| Language | Translations for "crossover"; alternative meanings/domain in parentheses. | |
Albanian | mbikalesë (flyover, overpass). (various references) | |
Chinese | 天桥 (Overpass). (various references) | |
Danish | crossover, crossing-over (crossing over, crossing-over), overkrydsning (criss-crossbridge, crossing over, crossing-over), overfoering (fly-over, transmission), overføring (carry, transference), konvergenspunkt (crossover point), genetisk overkrydsning (crossing over, crossing-over), elektronstrålens første konvergenspunkt (crossover point). (various references) | |
Dutch | cross-over, crossover, crossing over (crossing over, crossing-over), virtuele kathode, overkruising (crossing over, crossing-over), ongelijkvloerse kruising (braided intersection, fly-over crossing, grade separation, grade-separated intersection, grade-separated junction, highway grade separation, multiple bridge intersection), kruising (intersection), fly-over, eerste knoop, eerste convergentiepunt van de elektronenbundel (crossover point), eerste bundelknoop (cross-over, crossover point). (various references) | |
Farsi | متقاطع (Crisscross, Intercepter, Secant, Transverse), معبر (Approach, Conduit, Cut, Pad, Pathway, Road, Thoroughfare, Traverse), چلیپاءی , دورگه (Cross, Crossbreed, Hybrid, Mulatto). (various references) | |
Finnish | crossing over (crossing over, crossing-over), ylitys (crossing, overdraft), ylimeno, ylikulku (grossing, passage), tekijäinvaihto (crossing over, crossing-over), risteilypiste (crossover point), raideyhteys, geenienvaihdunta (crossing over, crossing-over), geenien vaihdunta (crossing over, crossing-over). (various references) | |
French | crossover (crossover point), crossing-over (crossing over, crossing-over), crossing over (crossing over, crossing-over), croisement par dessus, transfert, répartiteur, point de première convergence (crossover point), passage supérieur, jonction de voie, enjambement (crossing over, crossing-over), bretelle de voie. (various references) | |
German | Überführung (overpass, viaduct). (various references) | |
Greek | crossing-over (crossing over, crossing-over), σύνδεση σιδηρογραμμών, γεφυρωτή διασταύρωση, πάνω διασταύρωση, χιασματυπία (crossing over, crossing-over), επισχιασμός (crossing over, crossing-over), επιχιασμός (crossing over, crossing-over), διέλευση (transit), διασκελιστικότης (crossing over, crossing-over). (various references) | |
Italian | crossover, crossing-over (crossing over, crossing-over), crossing over (crossing over, crossing-over), comunicazione di binari, chiasmatipia (crossing over, crossing-over), trasferimento (demise, movement, overpass, removal, shifting, transfer), scambio intercromosomico (crossing over, crossing-over), scambio di geni (crossing over, crossing-over), ricombinazione incrociata (crossing over, crossing-over), punto di prima convergenza (crossover point), punto di incrocio (crossover point), incrocio a ponte. (various references) | |
Japanese Kanji | 踏み切り (level crossing, railway crossing, scratch, starting line), 踏切り (level crossing, railway crossing, scratch, starting line), 踏切 (level crossing, railway crossing, scratch, starting line), クローン病 (close game, Croatia, crocodile, Crohn's disease, cross, cross counter, cross country skiing, cross kick, crossbar, cross-check, cross-country race, crossed Nichol prism, cross-stitch, gross, off-road vehicle). (various references) | |
Japanese Katakana | ふみきり (level crossing, railway crossing, scratch, starting line), クロスオーバー . (various references) | |
Korean | 크로스오버. (various references) | |
Pig Latin | ossovercray.(various references) | |
Portuguese | crossover, crossing-over (crossing over, crossing-over), S de ligação, recombinação cruzada (crossing over, crossing-over), ponto de primeira convergência (crossover point), ponte superior, passagem superior, junção de via, entrecruzamento (lathing, network), "crossing-over" (crossing over, crossing-over). (various references) | |
Russian | переход перевернутый. (various references) | |
Spanish | cruce superior, cruce (cross, cross roads, crossing, interchange, intersection, junction), crossing-over (crossing over, crossing-over), translocación recíproca normal (crossing over, crossing-over), solsrecuzamiento (crossing over, crossing-over), recombinación cruzada (crossing over, crossing-over), punto de primera convergencia (crossover point), paso superior (overpass), intercambio de genes entre cromosomas homólogos durante la meiosis (crossing over, crossing-over), entrecruzamiento (crossing over, crossing-over), diagonal (cater-cornered, diagonal, diagonally). (various references) | |
Swedish | planskild korsning (flyover), konvergenspunkt (crossover point), förbindelsespår, överpassage, överkorsning (crossing over, crossing-over). (various references) | |
Turkish | genetik değişim, geçit (access, aisle, alley, alleyway, causeway, close, corridor, crossing, gangway, gap, gate, gateway, gorge, gullet, gut, parade, pass, passage, passageway, runway, Strait, thoroughfare, vestibule, walkway), değişime uğratılmış karekteristik yapı, atlama (dive, hop, jump, jumping, leap, omission, skip, skipping, spring, take off, vault, vaulting), aşma (encroachment, negotiation, overlap, passing over). (various references) | |
| Source: compiled by the editor from various translation references. | ||
Derivations | |
Words beginning with "crossover": crossovers. (additional references) | |
Words ending with "crossover": noncrossover. (additional references) | |
| |
"Crossover" is suggested in spellcheckers for the following: Kossovo, rosove, rossoneri. (additional references) | |
| Source: compiled by the editor, based on several corpora (additional references). | |
| # of Phoneme Matches | Pronunciation | Word(s) rhyming with "crossover" (pronounced krô"sō'ver) |
| 4 | -s ō' v er | passover, voiceover. |
| 3 | -ō' v er | antitakeover, carryover, changeover, hangover, holdover, layover, leftover, makeover, pushover, rollover, spillover, stopover, takeover, turnover. |
Source: compiled by the editor (additional references); see credits. | ||
Scrabble® Enable2K-Verified Anagrams | |
| Words within the letters "c-e-o-o-r-r-s-s-v" | |
-2 letters: crosser, recross, roosers, roscoes, scorers. | |
-3 letters: cooers, corers, corses, corves, covers, crores, crosse, rooser, rooses, roscoe, rovers, scorer, scores, servos, versos. | |
-4 letters: ceros, cooer, corer, cores, corse, coses, cover, coves, cress, crore, cross, overs, roose, roses, rover, roves, score, servo, sorer, sores, verso, voces. | |
-5 letters: cero, cess, coos, core, cors, coss, cove, eros, errs. | |
| Words containing the letters "c-e-o-o-r-r-s-s-v" | |
+1 letter: corrosives, crossovers. | |
+2 letters: overprocess. | |
+3 letters: conservators, noncrossover, overcompress. | |
+4 letters: codiscoverers, controversies, corresponsive, corrosiveness, overprocessed, overprocesses, reconversions. | |
+5 letters: anticorrosives, conservatoires, conservatories, oncornaviruses, overcompressed, overcompresses, overconstructs, overprocessing, overscrupulous, oversecretions, seroconversion. | |
| Source: compiled by the editor from various references; see credits. SCRABBLE® is a registered trademark. All intellectual property rights in and to the game are owned in the U.S.A and Canada by Hasbro Inc., and throughout the rest of the world by J.W. Spear & Sons Limited of Maidenhead, Berkshire, England, a subsidiary of Mattel Inc. Mattel and Spear are not affiliated with Hasbro. | |
| 1. Definition 2. Synonyms 3. Crosswords 4. Usage: Modern | 5. Usage: Commercial 6. Images: Photo Album 7. Images: Digital Art 8. Quotations: Non-fiction | 9. Usage Frequency 10. Expressions 11. Expressions: Internet 12. Translations: Modern | 13. Derivations 14. Rhymes 15. Anagrams 16. Bibliography |
Copyright © Philip M. Parker, INSEAD. Terms of Use.