Copyright © Philip M. Parker, INSEAD. Terms of Use.
| Domain | Definition |
Occupations | Operates machine equipped with opposing circular blades (one mounted above other) to shear metal plates and sheets to specified circular and curved dimensions: Turns thumbscrew to adjust distance between cutters to thickness of metal, using feeler gauge, scale, or pattern. Positions and clamps workpiece to turntable and sets specified distance between center point of workpiece and cutting blades, using template or sliding scale on machine. Starts rotating action of cutters and turntable to cut metal. Lifts and aligns workpiece between cutting blades manually or by hoist and guides it along layout lines to cut irregular shapes. May lay out lines onto workpiece, using compass, or trace from template. May turn handwheel which tilts machine table or install fixture to cut specified bevel on workpiece. (references) |
Source: compiled by the editor from various references; see credits. | |
Hexadecimal (or equivalents, 770AD-1900s) (references)43 49 52 43 55 4C 41 52 2D 53 48 45 41 52 4F 50 45 52 41 54 4F 52 |
| Leonardo da Vinci (1452-1519; backwards) (references)
|
Binary Code (1918-1938, probably earlier) (references)01000011 01001001 01010010 01000011 01010101 01001100 01000001 01010010 00101101 01010011 01001000 01000101 01000001 01010010 00100000 01001111 01010000 01000101 01010010 01000001 01010100 01001111 01010010 |
HTML Code (1990) (references)C I R C U L A R - S H E A R   O P E R A T O R |
ISO 10646 (1991-1993) (references)0043 0049 0052 0043 0055 004C 0041 0052 002D 0053 0048 0045 0041 0052 004F 0050 0045 0052 0041 0054 004F 0052 |
Encryption (beginner's substitution cypher): (references)374352375546355215534239355224950395235544952 |
| 1. Orthography 2. Bibliography |
Copyright © Philip M. Parker, INSEAD. Terms of Use.
