Copyright © Philip M. Parker, INSEAD. Terms of Use.
| CONTACT LENS INSERTER/REMOVER
CONTACT LENS INSERTION AND MANIPULATION ASSEMBLY AND METHOD
CONTACT LENS INSERTION DEVICE
CONTACT LENS INSERTION TOOL
CONTACT LENS INSPECTION APPARATUS AND LENS MOLD FOR USE IN SUCH APPARATUS
CONTACT LENS INVERTING APPARATUS AND METHOD
CONTACT LENS KIT AND CARRYING POUCH
CONTACT LENS MANUFACTURING APPARATUS
CONTACT LENS MATERIAL
CONTACT LENS MATERIAL AND CONTACT LENS
CONTACT LENS MOLD PACKAGING
CONTACT LENS MOULD
CONTACT LENS OF HIGH WATER CONTENT AND HIGH WATER BALANCE
CONTACT LENS OF HYDROPHILIC GELS WITH INHIBITOR AND SWELLING AGENT
CONTACT LENS OR INTRAOCULAR LENS HAVING NEAR AND DISTANCE ZONES
CONTACT LENS ORIENTATION METHOD AND APPARATUS
CONTACT LENS PACKAGE
CONTACT LENS PACKAGE HAVING IMPROVED ACCESS FEATURES
CONTACT LENS PACKAGE WITH INSERTION FEATURE
CONTACT LENS PACKAGE WITH LENS RETAINING RECESS
CONTACT LENS PACKAGING SOLUTIONS
CONTACT LENS PACKING SOLUTIONS
CONTACT LENS PRODUCTION LINE PALLET SYSTEM
CONTACT LENS SOLUTION CONTAINING CATIONIC GLYCOSIDE
CONTACT LENS STABILIZATION DESIGN SYSTEM
CONTACT LENS STORAGE CASE
CONTACT LENS STORAGE CONTAINER
CONTACT LENS SUCTION CUP
CONTACT LENS TRANSFER AND MATERIAL REMOVAL SYSTEM
CONTACT LENS TRANSFER DEVICE
CONTACT LENS TREATING METHOD AND COMPOSITION
CONTACT LENS TREATMENT APPARATUS
CONTACT LENS TREATMENT APPARATUS AND METHOD
CONTACT LENS TREATMENT METHOD
CONTACT LENS USEFUL FOR AVOIDING DRY EYE
CONTACT LENS UTILIZING STILES-CRAWFORD EFFECT
CONTACT LENS WHEREIN CENTRAL CORRECTION REGION HAS A CENTER 0.2-2.4MM OFFSET FROM LENS GEOMETRIC CENTER AND A DIAMETER OF 0.8-3.5MM
CONTACT LENS WITH FILTERING FOR OUTDOOR SPORTING AND RECREATIONAL ACTIVITIES
CONTACT LENS WITH MOULDED INVERSION MARK
CONTACT LENS WITH PALPEBRAL BOSSES
CONTACT LENS WITH PRE-DETERMINED USEFUL LIFE
CONTACT LENS WITH UNNATURAL GRAPHIC DESIGN
CONTACT LENSES
CONTACT LENSES AND MATERIALS AND METHODS OF MAKING SAME
CONTACT LENSES AND METHOD OF FITTING CONTACT LENSES
CONTACT LENSES BEARING IDENTIFYING MARKS
CONTACT LENSES BEARING MARKS
CONTACT LENSES COMPRISING LIPOPHILISED CYCLODEXTRINS
CONTACT LENSES FROM HIGHLY PERMEABLE SILOXANE POLYOL MATERIAL
CONTACT LENSES MADE FROM THERMOFORMABLE MATERIAL
CONTACT LENSES PROVIDING IMPROVED VISUAL ACUITY
CONTACT LENSES WITH CONSTANT PERIPHERAL GEOMETRY
CONTACT LENSES WITH CONTOURED EDGES
CONTACT LENSES WITH HYDROPHILIC CROSSLINKERS
CONTACT LENSES WITH IMPROVED CENTERING AND ORIENTING
CONTACT LENSES WITH MICROCHANNELS
CONTACT LENSES WITH OFF-AXIS BEVEL
CONTACT LIGHT EMITTING DEVICE
CONTACT LOCATION DETECTING MECHANISM OF TOUCH SIGNAL PROBE
CONTACT LUBRICATOR WITH METERED SUPPLY
CONTACT MACRORADIOGRAPHY CHARACTERIZATION OF DOPED OPTICAL FIBERS
CONTACT MAGNETIC DISK APPARATUS
CONTACT MAGNETIC HEAD HAVING A SOFTENING PORTION
CONTACT MAGNETIC RECORDING DISK FILE WITH A MAGNETORESISTIVE READ SENSOR
CONTACT MAGNETIC RECORDING DISK FILE WITH IMPROVED HEAD ASSEMBLY
CONTACT MAKER-BREAKER
CONTACT MAKING AND BREAKING DEVICE AND SYSTEM FOR MEASURING LOW CURRENT
CONTACT MANAGEMENT MODEL ASSESSMENT SYSTEM FOR CONTACT TRACKING IN THE PRESENCE OF MODEL UNCERTAINTY AND NOISE
CONTACT MANUFACTURING METHOD OF A MULTI-LAYERED METAL LINE STRUCTURE
CONTACT MARKER SYSTEM
CONTACT MASK HAVING GUARD RING PATTERNS FOR MANUFACTURING A SEMICONDUCTOR DEVICE
CONTACT MATERIAL
CONTACT MATERIAL FOR A VACUUM CIRCUIT BREAKER AND A METHOD FOR MANUFACTURING THE SAME
CONTACT MATERIAL FOR A VACUUM INTERRUPTER
CONTACT MATERIAL FOR CONTACTS FOR VACUUM INTERRUPTER AND METHOD OF MANUFACTURING THE CONTACT
CONTACT MATERIAL FOR VACUUM CIRCUIT BREAKERS
CONTACT MATERIAL FOR VACUUM INTERRUPTER AND METHOD FOR PRODUCING THE SAME
CONTACT MATERIAL FOR VACUUM VALVE
CONTACT MATERIAL FOR VACUUM VALVE AND METHOD OF MANUFACTURING THE SAME
CONTACT MEASUREMENT OF CONTAINER DIMENSIONAL PARAMETERS
CONTACT MEASURING DEVICE FOR DETERMINING THE DRY FILM THICKNESS OF A PAINT ON A CONDUCTIVE PRIMER ADHERED TO A PLASTIC SUBSTRATE
CONTACT MECHANISM FOR A SWITCH
CONTACT MECHANISM FOR ELECTRONIC OVERLOAD RELAYS
CONTACT MECHANISM FOR IC TESTING
CONTACT MECHANISM FOR TEST HEAD OF SEMICONDUCTOR TEST SYSTEM
CONTACT MECHANISM FOR TRANSPORTATION COMPRISING SUCTION UNIT EQUIPPED WITH FLOATING MECHANISM
CONTACT MEMBER FOR AN ULTRASONIC TRANSDUCER
CONTACT MEMBER FOR CONTROLLING AN ELECTROSTATIC STATE OF A CHARGEABLE MEMBER
CONTACT MEMBER FOR MINIATURE ELECTRICAL CIRCUIT CONNECTOR
CONTACT MEMBER STACKING SYSTEM AND METHOD
CONTACT MEMBER WITH COMPOSITE SINTERED METAL PASTE STRIP HAVING 1-5 WT % CARBON DIFFUSION BONDED THEREIN
CONTACT MEMBER WITH DOUBLE INSULATION DISPLACEMENT TERMINAL
CONTACT METAL DIFFUSION BARRIER FOR SEMICONDUCTOR DEVICES
CONTACT METALLIZATION OF SEMICONDUCTOR INTEGRATED-CIRCUIT DEVICES
CONTACT MICROFLUIDIC PRINTING APPARATUS
CONTACT MODULE, AS FOR A SMART CARD, AND METHOD FOR MAKING SAME
CONTACT MONITOR, METHOD OF FORMING SAME AND METHOD OF ANALIZING CONTACT-, VIA- AND/OR TRENCH-FORMING PROCESSES IN AN INTEGRATED CIRCUIT
CONTACT MONITOR, METHOD OF FORMING SAME AND METHOD OF ANALYZING CONTACT-, VIA-AND/OR TRENCH-FORMING PROCESSES IN AN INTEGRATED CIRCUIT
CONTACT MOULD FOR THE CONTINUOUS CASTING OF STEEL SLABS
CONTACT MOUNT STRIP AND PROCESS FOR SEVERING A CONTACT HELD ON SAID STRIP
CONTACT MOVEMENT PREVENTION STRUCTURE
CONTACT OF A SEMICONDUCTOR DEVICE AND ITS MANUFACTURING PROCESS
CONTACT OF A ZIF PGA SOCKET AND THE SOCKET USING THE SAME
CONTACT OF AN ELECTRICAL CONNECTOR HAVING SOLDER TERMINAL CAPABLE OF FITTING WITH A HOUSING OF THE CONNECTOR
CONTACT OF AN LGA SOCKET
CONTACT OF ELECTRICAL CONNECTOR
CONTACT OF SINGLE PITCH ARRANGEMENT IN STRIP STOCK
CONTACT OF SOCKET CONNECTOR
CONTACT OF SOCKET-TYPE ELECTRICAL CONNECTOR
CONTACT ON A P-TYPE REGION
CONTACT OPENING CAP FOR BOTTLE CONTAINERS
CONTACT OPENING CAP FOR BOTTLES
CONTACT OPENINGS AND AN ELECTRONIC COMPONENT FORMED FROM THE SAME
CONTACT OPENINGS TO ELECTRONIC COMPONENTS HAVING RECESSED SIDEWALL STRUCTURES
CONTACT OPENINGS, ELECTRICAL CONNECTIONS AND INTERCONNECTIONS FOR INTEGRATED CIRCUITRY
CONTACT OPERATING ARRANGEMENT WITH SHOCK-REDUCING FEATURE FOR HIGH-VOLTAGE APPARATUS
CONTACT OR CONTACTLESS CHIP CARD WITH BRACE
CONTACT OR INSERTION LASER PROBE HAVING WIDE ANGLE RADIATION
CONTACT OR INTRAOCULAR LENS AND METHOD FOR ITS PREPARATION
CONTACT PAD AND FLUID INTERCONNECT CONFIGURATION ON A PRINT CARTRIDGE
CONTACT PAD EXTENDER FOR INTEGRATED CIRCUIT PACKAGES
CONTACT PAD HAVING METALLICALLY ANCHORED ELASTOMERIC ELECTRICAL CONTACTS
CONTACT PADS FOR RADIATION IMAGERS
CONTACT PARTS FOR TRUCK CIRCUIT BREAKER
CONTACT PHOTOLITHOGRAPHIC PROCESS FOR REALIZING METAL LINES ON A SUBSTRATE BY VARYING EXPOSURE ENERGY
CONTACT PIECE FOR USE IN A ROTARY ENCODER AND METHOD OF CONSTRUCTING SAME
CONTACT PIECES FOR USE IN AN ELECTRIC CONNECTOR AND METHOD OF MAKING THE SAME
CONTACT PIN AND BUSHING ASSEMBLY
CONTACT PIN ASSEMBLY, CONTACT PIN ASSEMBLY MANUFACTURING METHOD, CONTACT PIN ASSEMBLING STRUCTURE, CONTACT PIN ASSEMBLING STRUCTURE MANUFACTURING METHOD, AND SOCKET FOR ELECTRICAL PARTS
CONTACT PIN DESIGN FOR A MODULAR JACK
CONTACT PIN DEVICE FOR IC SOCKETS
CONTACT PIN FOR TESTING MICROELECTRONIC COMPONENTS HAVING SUBSTANTIALLY SPHERICAL CONTACTS
CONTACT PIN HAVING ANCHORING WINGS IN OPPOSITE DIRECTIONS, AND CONNECTOR ELEMENTS
CONTACT PIN HEADER CONNECTOR REPAIR METHOD AND REPAIR FIXTURE
CONTACT PIN HOLDER ASSEMBLY
CONTACT PIN MODULE AND TESTING DEVICE PROVIDED WITH THE SAME
CONTACT PIN SUBASSEMBLY
CONTACT PIN WITH CERAMIC INSULATION
CONTACT PLANAR MAGNETORESISTIVE HEAD
CONTACT PLANARIZATION MATERIALS THAT GENERATE NO VOLATILE BYPRODUCTS OR RESIDUE DURING CURING
CONTACT PLANARIZATION USING NANOPOROUS SILICA MATERIALS
CONTACT PLATE FOR BASES OF ELECTRIC LAMPS
CONTACT PLUG
CONTACT PLUG FORMATION FOR DEVICES WITH STACKED CAPACITORS
CONTACT PLUG FORMING METHOD
CONTACT PLUG IN CAPACITOR DEVICE
CONTACT PORTION STRUCTURE OF FEMALE CONNECTOR TERMINAL
CONTACT POSITION ASSURANCE DEVICE
CONTACT POSITION INDICATOR FOR AN INDUSTRIAL-RATED CIRCUIT BREAKER
CONTACT POSITION SENSOR USING CONSTANT CONTACT FORCE CONTROL SYSTEM
CONTACT POSITION SENSOR WITH OPTICAL FEEDBACK
CONTACT POTENTIAL DIFFERENCE CELL
CONTACT POTENTIAL DIFFERENCE IONIZATION DETECTOR
CONTACT POURING
CONTACT POURING OF MOLTEN METAL FROM A VESSEL INTO A MOLD
CONTACT PRESSER APPARATUS FOR A MULTI-NEEDLE STITCHING MACHINE
CONTACT PRESSURE AND PARTING DEVICE FOR A METAL STRIP TO BE CONNECTED TO A WINDING REEL
CONTACT PRESSURE CONTROL METHOD AND DEVICE FOR ROTARY CUTTER
CONTACT PRESSURE DETECTING SENSOR AND CONTACT PRESSURE MEASURING DEVICE INCLUDING SAME
CONTACT PRESSURE JIG FOR SIGNAL ANALYSIS
CONTACT PRESSURE SENSOR
CONTACT PREVENTION SYSTEM FOR A BACKHOE
CONTACT PREVENTIVE APPARATUS FOR VEHICLES
CONTACT PRINT FRAME HAVING A DOUBLE GLASS
CONTACT PRINTABLE ADHESIVE COMPOSITION AND METHODS OF MAKING THEREOF
CONTACT PRINTER
CONTACT PRINTER AND METHOD OF MAKING A FILTER FOR A CONTACT PRINTER
CONTACT PRINTER FOR PHOTOGRAPHIC NEGATIVES
CONTACT PRINTING DEVICE FOR USE IN A PHOTOGRAPHIC PRINTER
CONTACT PRINTING PROCESS
CONTACT PROBE
CONTACT PROBE AND PROBE DEVICE
CONTACT PROBE APPARATUS USED IN ELECTRIC TESTS FOR A CIRCUIT BOARD
CONTACT PROBE ARRANGEMENT
CONTACT PROBE ARRANGEMENT FOR FUNCTIONAL ELECTRICAL TESTING
CONTACT PROBE FOR LASER CYCLOPHOTOCOAGULATION
CONTACT PROBE PIN FOR WAFER PROBING APPARATUS
CONTACT PROBE UNIT
CONTACT PROBE UNIT INCLUDING NEEDLE MEMBERS URGED BY A RESILIENT MATERIAL BLOCK
CONTACT PROBE UTILIZING CONDUCTIVE MELTABLE PROBING MATERIAL
CONTACT PROBE WITH GUIDE UNIT AND FABRICATION METHOD THEREOF
CONTACT PROBE WITH OFF-CENTERED BACK-DRILLED APERTURE
CONTACT PROBES
CONTACT PROCESS INTERCONNECT POLY-CRYSTAL SILICON LAYER IN THIN FILM SRAM
CONTACT PROCESS USING TAPER CONTACT ETCHING AND POLYCIDE STEP
CONTACT PROCESS USING Y-CONTACT ETCHING
CONTACT PROGRAMMABLE ROM AND METHOD OF MANUFACTURING THE SAME
CONTACT PROGRAMMER
CONTACT PROTECTION HOUSING FOR AN ELECTRICAL CONNECTION
CONTACT REACTOR FOR A QUASI-ISOTHERMAL CATALYTIC OXIDATION OF SO.SUB.2 TO SO.SUB.3 AND METHOD OF OPERATING SAME
CONTACT RECORDING MAGNETIC DISK DEVICE
CONTACT RECORDING SLIDER FOR USE IN A LUBRICANT CONTAINING INFORMATION STORAGE SYSTEM
CONTACT RECORDING SLIDER WITH ACTIVE CONTACT SURFACES
CONTACT REGIONS FOR NARROW TRENCHES IN SEMICONDUCTOR DEVICES AND METHOD
CONTACT RESISTANCE-REGULATED STORAGE HEATER FOR FLUIDS
CONTACT RETAINER FOR RETAINING A CONTACT TO A HOUSING
CONTACT RETENTION
CONTACT RETENTION DEVICE FOR AN ELECTRICAL CONNECTOR
CONTACT RETENTION SYSTEM
CONTACT RING ARCHITECTURE
CONTACT RING ASSEMBLY AND METHOD
CONTACT RING FOR ON-CELL BATTERY TESTER
CONTACT ROLL FOR BELT GRINDING MACHINES
CONTACT ROLLER SYSTEM OF A WINDING MACHINE
CONTACT ROLLER SYSTEM OF A WINDING MACHINE FOR THIN STRIP MATERIAL
CONTACT ROLLERS FOR A WINDING MACHINE
CONTACT SCANNERS FOR SCANNING IMAGES OF AN ILLUMINATED FILM ONTO A PHOTOSENSOR ARRAY
CONTACT SCHEME FOR INTRACAVITY-CONTACTED VERTICAL-CAVITY SURFACE-EMITTING LASER
CONTACT SCHEME FOR MINIMIZING INDUCTIVE PICKUP IN MAGNETORESISTIVE READ HEADS
CONTACT SEAL FOR TURBOMACHINES RUNNING AT HIGH SPEED AND/OR HAVING HIGH TEMPERATURES IN THE SEALING REGION
CONTACT SECURING SLEEVE FOR USE WITH A COAXIAL CABLE
CONTACT SENSING MODULE EMBODYING LOOP POWER SUPPLY AND STATE SENSING FOR RELAYS AND OTHER CONTACTS
CONTACT SENSING PROBE
CONTACT SENSITIVE SUBSTRATE
CONTACT SENSOR
CONTACT SENSOR WITH IMPROVED SENSITIVITY
CONTACT SENSOR-BASED MICRODISPENSING TOOL
CONTACT SERVER FOR CALL CENTER
CONTACT SERVER FOR CALL CENTER FOR SYNCRONIZING SIMULTANEOUS TELEPHONE CALLS AND TCP/IP COMMUNICATIONS
CONTACT SET
CONTACT SET FOR TWISTED PAIR CABLE WITH INDIVIDUALLY SHIELDED PAIRS
CONTACT SET HAVING A WIPING ACTION FOR PRINTED CIRCUIT BOARD
CONTACT SHEET
CONTACT SHEET FOR PROVIDING AN ELECTRICAL CONNECTION BETWEEN A PLURALITY OF ELECTRONIC DEVICES
CONTACT SHEET RECORDING WITH A SELF-ACTING NEGATIVE AIR BEARING
CONTACT SHOE ASSEMBLY FOR A TRAIN
CONTACT SHOE DEVICE FOR CIRCUIT BREAKER
CONTACT SIDEWALL TAPERING WITH ARGON SPUTTERING
CONTACT SLEEVE
CONTACT SLEEVE FOR A MEASUREMENT MOVEMENT
CONTACT SLEEVE FOR ELECTRICAL COMMUNICATION
CONTACT SLIDER FOR MAGNETO-RESISTIVE HEADS
CONTACT SOCKET
CONTACT SOCKET FOR CONNECTING FLAT CONTACT TONGUES
CONTACT SOCKET FOR ELECTRICAL PIN-AND-SOCKET CONNECTOR
CONTACT SPRING
CONTACT SPRING AND RECEPTACLE CONTACT HAVING AN INSERTION FUNNEL AND CONTACT SURFACE
CONTACT SPRING ARRANGEMENT
CONTACT SPRING ARRANGEMENT FOR A RELAY FOR CONDUCTING AND SWITCHING HIGH CURRENTS
CONTACT SPRING CLIP FOR A CARTRIDGE FUSE BLOWN FUSE LIGHT INDICATOR
CONTACT SPRING FOR A PLUG-IN CONNECTOR
CONTACT SPRING FOR MINIATURE THERMOSTAT
CONTACT SPRING HAVING A DETENT SLEEVE CONSTRUCTED AS AN OVERSPRING
CONTACT SPRING HAVING AN IMPROVED ELECTRICAL CONTACT
CONTACT SPRING SOCKET
CONTACT SPRING STRIP FOR ATTACHING TO A HOLDING STRIP AND CONTACT PART WITH A CONTACT SPRING STRIP AND A HOLDING STRIP, ESPECIALLY A FRONT PANEL OF A PRINTED CIRCUIT MODULE
CONTACT SPRING STRIP FOR PLUGGING ONTO HOLDING STRIPS, IN PARTICULAR AT THE FRONT PANEL OF MODULES IN SHIELDED MODULE CARRIERS
CONTACT SPRING WITH CONTACT PREOPENING
CONTACT START PLASMA TORCH | CONTACT START/STOP DISK DRIVE WITH MINIMIZED HEAD-DISK WEAR IN TEXTURED LANDING ZONE
CONTACT STATUS MONITOR
CONTACT STEPPER PRINTED LITHOGRAPHY METHOD
CONTACT STRIP
CONTACT STRIP AND CARD CONNECTOR INCLUDING SAME
CONTACT STRIP FOR ELECTRICAL CONNECTOR
CONTACT STRIP FOR PRINTED CIRCUIT BOARDS
CONTACT STRIP FOR PROVIDING COMMON ELECTRICAL CONNECTION OF SEVERAL ELECTRICALLY OPERATED FUEL INJECTION VALVES
CONTACT STRIP LIGHTING SYSTEM
CONTACT STRUCTURE
CONTACT STRUCTURE AND ASSEMBLY MECHANISM THEREOF
CONTACT STRUCTURE AND ASSOCIATED PROCESS FOR PRODUCTION OF SEMICONDUCTOR ELECTRONIC DEVICES AND IN PARTICULAR NONVOLATILE EPROM AND FLASH EPROM MEMORIES
CONTACT STRUCTURE AND MEMORY ELEMENT INCORPORATING THE SAME
CONTACT STRUCTURE AND METHOD OF FORMATION
CONTACT STRUCTURE AND METHOD OF FORMING A CONTACT STRUCTURE
CONTACT STRUCTURE AND PROCESS FOR FORMATION
CONTACT STRUCTURE AND PRODUCTION METHOD THEREOF
CONTACT STRUCTURE AND PRODUCTION METHOD THEREOF AND PROBE CONTACT ASSEMBLY USING SAME
CONTACT STRUCTURE BETWEEN FLEXIBLE CABLE AND SIGNAL RECEIVING UNIT AND RECORDING APPARATUS USING SAID CONTACT STRUCTURE
CONTACT STRUCTURE BETWEEN TWO CONDUCTIVE LAYERS IN SEMICONDUCTOR DEVICE AND METHOD OF MANUFACTURING THE SAME
CONTACT STRUCTURE DEVICE FOR INTERCONNECTIONS, INTERPOSER, SEMICONDUCTOR ASSEMBLY AND PACKAGE USING THE SAME AND METHOD
CONTACT STRUCTURE FOR A FERROELECTRIC MEMORY DEVICE
CONTACT STRUCTURE FOR A SEMICONDUCTOR DEVICE AND MANUFACTURING METHOD THEREOF
CONTACT STRUCTURE FOR AN ELECTRIC II/VI SEMICONDUCTOR COMPONENT AND A METHOD FOR THE PRODUCTION OF THE SAME
CONTACT STRUCTURE FOR AN INTEGRATED SEMICONDUCTOR DEVICE
CONTACT STRUCTURE FOR CONNECTING AN ELECTRODE TO A SEMICONDUCTOR
CONTACT STRUCTURE FOR CONNECTING AN ELECTRODE TO A SEMICONDUCTOR DEVICE AND A METHOD OF FORMING THE SAME
CONTACT STRUCTURE FOR ELECTRICAL COMMUNICATION WITH CONTACT TARGETS
CONTACT STRUCTURE FOR GROUP III-V SEMICONDUCTOR DEVICES AND METHOD OF PRODUCING THE SAME
CONTACT STRUCTURE FOR HIGH SPEED TRANSMISSION CONNECTOR
CONTACT STRUCTURE FOR IC SOCKET
CONTACT STRUCTURE FOR IMPROVING PHOTORESIST ADHESION ON A DIELECTRIC LAYER
CONTACT STRUCTURE FOR INTEGRATED CIRCUIT DEVICES
CONTACT STRUCTURE FOR INTEGRATED CIRCUITS
CONTACT STRUCTURE FOR INTERCONNECTION IN SEMICONDUCTOR DEVICES AND MANUFACTURING METHOD THEREOF
CONTACT STRUCTURE FOR MEMORY DEVICE
CONTACT STRUCTURE FOR RELIABLE METALLIC INTERCONNECTION
CONTACT STRUCTURE FOR SEMICONDUCTOR DEVICE
CONTACT STRUCTURE FOR SEMICONDUCTOR DEVICE AND THE MANUFACTURING METHOD THEREOF
CONTACT STRUCTURE FOR SEMICONDUCTOR DEVICES AND CORRESPONDING MANUFACTURING PROCESS
CONTACT STRUCTURE FOR SEMICONDUCTOR LASERS
CONTACT STRUCTURE FOR TOY MOTORS
CONTACT STRUCTURE FOR VACUUM CIRCUIT BREAKER
CONTACT STRUCTURE FOR VERTICAL CHIP CONNECTIONS
CONTACT STRUCTURE FORMED BY MICROFABRICATION PROCESS
CONTACT STRUCTURE FORMED BY PHOTOLITHOGRAPHY PROCESS
CONTACT STRUCTURE FORMED OVER A GROOVE
CONTACT STRUCTURE HAVING A DIFFUSION BARRIER
CONTACT STRUCTURE HAVING SILICON FINGER CONTACTOR
CONTACT STRUCTURE HAVING SILICON FINGER CONTACTORS AND TOTAL STACK-UP STRUCTURE USING SAME
CONTACT STRUCTURE OF A SLIDING SWITCH
CONTACT STRUCTURE OF AN INTERCONNECTION LAYER FOR A SEMICONDUCTOR DEVICE AND A MULTILAYER INTERCONNECTION SRAM
CONTACT STRUCTURE OF COLUMN GATE AND DATA LINE
CONTACT STRUCTURE OF ELECTRICAL CONNECTOR AND INSPECTING DEVICE THEREFOR
CONTACT STRUCTURE OF LEAD
CONTACT STRUCTURE OF SEMICONDUCTOR DEVICE
CONTACT STRUCTURE OF SEMICONDUCTOR DEVICE AND METHOD OF MANUFACTURING THE SAME
CONTACT STRUCTURE OF SEMICONDUCTOR MEMORY DEVICE FOR REDUCING CONTACT RELATED DEFECT AND CONTACT RESISTANCE AND METHOD FOR FORMING THE SAME
CONTACT STRUCTURE OF SOCKET CONNECTOR
CONTACT STRUCTURE OF SUBSTRATES OF TOUCH PANEL AND METHOD OF BONDING THE SAME
CONTACT STRUCTURE PRODUCTION METHOD
CONTACT STRUCTURE USING BARRIER METAL AND METHOD OF MANUFACTURING THE SAME
CONTACT STRUCTURE USING TAPER CONTACT ETCHING AND POLYCIDE STEP
CONTACT STRUCTURE WITH A LOWER INTERCONNECTION HAVING T-SHAPED PORTION IN CROSS SECTION AND METHOD FOR FORMING THE SAME
CONTACT STRUCTURE WITH AN OXIDE SILICIDATION BARRIER
CONTACT STRUCTURE WITH CAPACITOR FOR GROUP III-V SEMICONDUCTOR DEVICES
CONTACT STRUCTURE WITH FLEXIBLE CABLE AND PROBE CONTACT ASSEMBLY USING SAME
CONTACT STRUCTURE, METHOD OF FORMING THE SAME, SEMICONDUCTOR DEVICE, AND METHOD OF MANUFACTURING THE SAME
CONTACT STRUCTURES OF WIRINGS AND METHODS FOR MANUFACTURING THE SAME, AND THIN FILM TRANSISTOR ARRAY PANELS INCLUDING THE SAME AND METHODS FOR MANUFACTURING THE SAME
CONTACT STRUCTURES WITH BLADES HAVING A WIPING MOTION
CONTACT SUPPORT FOR A MOLDED CONNECTOR
CONTACT SURFACES OF A TRACK PART AND RAILWAY WHEEL
CONTACT SWITCH
CONTACT SWITCH ASSEMBLY HAVING A CONDUCTOR THAT HOLDS A MOVABLE CONTACT PLATE
CONTACT SWITCH DEVICE
CONTACT SWITCH FOR AN ELECTRICAL APPLIANCE
CONTACT SYSTEM ARRANGEMENT FOR PLUG-IN CIRCUIT BREAKERS AND BASE
CONTACT SYSTEM FOR A CURRENT LIMITING UNIT
CONTACT SYSTEM FOR INTERCONNECTION OF SUBSTRATE AND BATTERY CELL
CONTACT TEMPERATURE PROBE WITH THERMAL ISOLATION
CONTACT TEMPERATURE PROBE WITH UNRESTRAINED ORIENTATION
CONTACT TEMPERATURE SENSOR
CONTACT TERMINAL
CONTACT TERMINAL ARRANGEMENT FOR ELECTRICAL BUILT-IN SWITCHING UNIT
CONTACT TERMINAL ARRANGEMENT IN A STORAGE BATTERY
CONTACT TERMINAL ELEMENT, CONTACT TERMINAL DEVICE
CONTACT TERMINAL FIXING CONSTRUCTION
CONTACT TERMINAL FOR A CIRCUIT BOARD
CONTACT TERMINAL FOR MODULAR PLUG
CONTACT TERMINAL OF A MEMORY CARD PLUG CONNECTOR
CONTACT TERMINAL WITH LINEAR CONTACT REGION
CONTACT TEST CIRCUIT
CONTACT TEST METHOD AND SYSTEM FOR MEMORY TESTERS
CONTACT TESTER
CONTACT TESTING DEVICE
CONTACT TIP
CONTACT TIP ASSEMBLY FOR MIG GUN
CONTACT TIP FOR ARC WELDING
CONTACT TIP FOR LASER SURGERY
CONTACT TIP FOR WELDING
CONTACT TO N-GAN WITH AU TERMINATION
CONTACT TOASTER
CONTACT TOASTER AND METHOD
CONTACT TOASTER WITH INFINITE ADJUSTMENT
CONTACT TOUCHSCREEN WITH AN IMPROVED INSULATED SPACER ARRANGEMENT
CONTACT TRANSDUCER ASSEMBLY FOR HEARING DEVICES
CONTACT TRANSFER DEVICE AND IMAGE FORMING EQUIPMENT
CONTACT TRAY APPARATUS AND METHOD
CONTACT TRAY ASSEMBLY AND METHOD
CONTACT TRAY HAVING TRAY SUPPORTED DOWNCOMERS
CONTACT TRIP ASSEMBLY FOR FASTENING TOOL
CONTACT TWO-DIMENSIONAL BAR CODE READER HAVING PRESSURE ACTUATED SWITCH
CONTACT TYPE AUTOMATIC ROLL CLEANER
CONTACT TYPE CHARGING DEVICE AND IMAGE FORMING APPARATUS HAVING THE SAME
CONTACT TYPE CHARGING DEVICE HAVING VOLTAGE LIMITER
CONTACT TYPE COLOR IMAGE SENSOR
CONTACT TYPE DEVELOPING METHOD AND DEVELOPING UNIT
CONTACT TYPE IMAGE SENSOR
CONTACT TYPE IMAGE SENSOR AND INFORMATION PROCESSING APPARATUS
CONTACT TYPE IMAGE SENSOR AND METHOD OF PRODUCING THE SAME
CONTACT TYPE IMAGE SENSOR COMPRISING A PLURALITY OF MICROLENSES
CONTACT TYPE IMAGE SENSOR DEVICE
CONTACT TYPE IMAGE SENSOR HAVING AN ORGANIC TYPE THIN FILM LIGHT EMITTING ELEMENT
CONTACT TYPE IMAGE SENSOR HAVING ORIGINAL SUPPORT MEMBER WITH A REFLECTING SURFACE
CONTACT TYPE IMAGE SENSOR HAVING PHOTOELECTRIC CONVERSION ELEMENTS TO REDUCE SIGNAL VARIATION CAUSED BY LUMINOUS INTENSITY VARIATION OF LIGHT SOURCE
CONTACT TYPE IMAGE SENSOR WITH MORE-UNIFIED CONSTRUCTION
CONTACT TYPE IMAGE SENSOR, PRODUCING METHOD OF THE SAME, AND INFORMATION PROCESSING APPARATUS
CONTACT TYPE INDIRECT CONDUCTION, VIBRATING TYPE MICROPHONE
CONTACT TYPE LINE IMAGE SENSOR
CONTACT TYPE LINEAR IMAGE SENSOR
CONTACT TYPE LIQUID LEVEL SENSING SYSTEM
CONTACT TYPE MAGNETIC DISC APPARATUS
CONTACT TYPE MAGNETIC DISK APPARATUS
CONTACT TYPE MAGNETIC DISK DRIVE
CONTACT TYPE PHOTOELECTRIC TRANSDUCER
CONTACT TYPE PROBER AUTOMATIC ALIGNMENT
CONTACT TYPE RECORDING HEAD AND IMAGE FORMING APPARATUS USING THE RECORDING HEAD
CONTACT TYPE ROTARY ENCODER EMPLOYING ELECTRICALLY CONDUCTIVE BALLS AS SWITCHING CONTACTS FOR PRINTED CIRCUIT ELECTRODES
CONTACT TYPE VEHICLE LAUNDRY ELEMENT AND ATTACHMENT SYSTEM THEREFOR
CONTACT UNIT FOR A COMBINED BRAKE/BLINKER ARRANGMENT IN A VEHICLE
CONTACT UNIT FOR A SWITCH
CONTACT UNIT FOR ELECTROMAGNETIC RELAYS
CONTACT VIA FOR SEMICONDUCTOR DEVICE
CONTACT WHEEL
CONTACT WHEEL AUTOMATED DIGITIZER WITH VISIBLE SENSING OF MARKED REFERENCE POINTS
CONTACT WHICH ENABLES RELIABLE DISCRIMINATION OF ITS ORIENTATION AND CONNECTOR USING THE SAME
CONTACT WIDTH SENSORS
CONTACT WIRE ASSEMBLY
CONTACT WITH A BOTTOM AND A TOP SPRING
CONTACT WITH A SILVER CONTACT BASE AND PROCESS FOR MAKING THE SAME
CONTACT WITH AN IMPROVED LOCKING ELEMENT
CONTACT WITH ANTI-SKIVING FEATURE
CONTACT WITH COMPLIANT SECTION
CONTACT WITH DUAL COMPLIANT PIN SECTIONS USED IN A ZIF SOCKET
CONTACT WITH GERMANIUM LAYER
CONTACT WITH LATCH FOR CONTACT RETENTION AND HOUSING THEREFOR
CONTACT WITH RETENTION LANCE AND HOUSING THEREFOR
CONTACT ZONE FOR A POWER BREAKER
CONTACT/CONTACTLESS DATA TRANSACTION CARD
CONTACT/CONTACTLESS SMART CARD HAVING CUSTOMIZABLE ANTENNA INTERFACE
CONTACT/NON-CONTACT IC CARD AND CONTACT/NON-CONTACT IC CARD READER-WRITER
CONTACT/NONCONTACT TYPE DATA CARRIER MODULE
CONTACT/VIA FORCE FILL PROCESS
CONTACT/VIA FORCE FILL TECHNIQUES
CONTACT/VIA FORCE FILL TECHNIQUES AND RESULTING STRUCTURES
CONTACT-ACTIVATED PRESSURIZED WATER RELEASE TOY
CONTACT-BUMPLESS CHIP CONTACTING METHOD AND AN ELECTRONIC CIRCUIT PRODUCED BY SAID METHOD
CONTACT-CONNECTING SAFETY-MONITORED SYNTHETIC FIBER ROPES
CONTACT-FREE CHIP CARD FOR REMOTE TRANSMISSION
CONTACT-FREE DATA EXCHANGE BETWEEN A TERMINAL AND MODULAR PORTABLE SET HAVING TWO DIFFERENT PROTOCOLS FOR EXCHANGE WHICH IS SELECTED BASED ON PORTABLE SET TYPE
CONTACT-FREE DIVERTING DEVICE FOR SHEET MATERIAL
CONTACT-FREE DOUBLE-SHEET CONTROL DEVICE FOR A PRINTER
CONTACT-FREE FLOATING-GATE MEMORY ARRAY WITH SILICIDED BURIED BITLINES AND WITH SINGLE-STEP-DEFINED FLOATING GATES
CONTACT-FREE PORTABLE OBJECT COMPRISING ONE OR SEVERAL CONTACT-FREE PERIPHERAL DEVICE
CONTACT-FREE PROCEDURE FOR MEASURING THE THREE DIMENSIONAL SHAPE OF AN OBJECT, PARTICULARLY A HUMAN FOOT, BY IMAGING THE OBJECT AND THE INDENTATION LEFT BY THE OBJECT
CONTACT-FREE SHEET GUIDANCE DEVICE IN A SHEET-FED PRINTING PRESS
CONTACT-FREE SHEET GUIDING DEVICE IN A SHEET-FED PRINTING PRESS
CONTACT-KILLING ANTIMICROBIAL DEVICES
CONTACT-KILLING NON-LEACHING ANTIMICROBIAL MATERIALS
CONTACT-LESS ARRAY OF FULLY SELF-ALIGNED, TRIPLE POLYSILICON, SOURCE-SIDE INJECTION, NONVOLATILE MEMORY CELLS WITH METAL-OVERLAID WORDLINES
CONTACT-LESS BALLISTIC SCANNING METHOD
CONTACT-LESS PROBE OF SEMICONDUCTOR WAFERS
CONTACT-LESS SEAL AND METHOD FOR MAKING SAME
CONTACT-MAKING DEVICE
CONTACT-MAKING DEVICE FOR CONNECTING A CONDUCTOR FILM WHICH HAS A PLURALITY OF CONTACT CONDUCTOR TRACKS
CONTACT-MAKING SYSTEM FOR SEMICONDUCTOR WIRE CONNECTIONS
CONTACT-SAFE BASE-AND-SOCKET SYSTEM FOR LIGHTING FIXTURES
CONTACT-SEPARATING DEVICE FOR CIRCUIT BREAKERS
CONTACT-SUBSTRATE FOR A SEMICONDUCTOR DEVICE COMPRISING A CONTOUR
CONTACT-TYPE CHARGING DEVICE HAVING A PLURALITY OF PROJECTIONS OVER THE SURFACE OF THE CHARGING DEVICE
CONTACT-TYPE CHARGING MEMBER WHICH INCLUDES AN INSULATING METAL OXIDE IN A SURFACE LAYER THEREOF
CONTACT-TYPE ELECTROCONDUCTIVE BRUSH FOR ELECTRICALLY CHARGING AN IMAGE CARRIER OF AN IMAGE FORMING APPARATUS
CONTACT-TYPE ERASING DEVICE FOR IMAGE FORMING APPARATUS
CONTACT-TYPE IMAGE SENSOR
CONTACT-TYPE IMAGE SENSOR ASSEMBLY HAVING SUPPORTING STRUCTURE FOR MAINTAINING PREDETERMINED DISTANCE BETWEEN THE LENS AND THE ORIGINAL AND THE SENSOR
CONTACT-TYPE IMAGE SENSOR FOR GENERATING ELECTRIC SIGNALS CORRESPONDING TO AN IMAGE FORMED ON A DOCUMENT
CONTACT-TYPE IMAGE SENSOR HAVING AN ADHESIVE ELASTIC LAYER THEREIN
CONTACT-TYPE IMAGE SENSOR HAVING PROTRUSIONS FORMED ON A PLATE
CONTACT-TYPE MAGNETIC HEAD HAVING AN INTEGRAL CONTROL PORTION FOR GENERATING NEGATIVE PRESSURE
CONTACT-TYPE SENSOR
CONTACT-TYPE SWITCH
CONTACT-TYPE THERMOMETER
CONTACT-UNIT SLIDE FOR CONTACTORS
CONTACTABLE CHARGING DEVICE FOR APPLYING AN OSCILLATING VOLTAGE, PROCESS CARTRIDGE AND IMAGE FORMING APPARATUS USING THE SAME
CONTACTED BODY SILICON-ON-INSULATOR FIELD EFFECT TRANSISTOR
CONTACTED CELL ARRAY CONFIGURATION FOR ERASABLE AND PROGRAMMABLE SEMICONDUCTOR MEMORIES
CONTACTING APPARATUS AND CONTACT ELEMENT THEREFORE
CONTACTING APPARATUS FOR A CHIPCARD
CONTACTING APPARATUS FOR A SI-MODULE
CONTACTING APPARATUS FOR A SMART CARD
CONTACTING APPARATUS, IN PARTICULAR A CONTACTING APPARATUS FOR A SUBSCRIBER IDENTITY MODULE
CONTACTING ARRANGEMENT FOR A CIRCUIT BOARD SUPPORT ASSEMBLY
CONTACTING ARRANGEMENT FOR MULTICORE FLAT CABLES
CONTACTING CHARGING DEVICE FOR ELECTROSTATIC PHOTORECEPTOR DRUM
CONTACTING CLIP
CONTACTING CONDITION MAINTAINING DEVICE FOR USE IN AN ELECTRIC PART SOCKET
CONTACTING DEVICE
CONTACTING DEVICE FOR A CHIP CARD AND IN PARTICULAR FOR A SIM CARD
CONTACTING DEVICE FOR A FLAT BAND CABLE
CONTACTING DEVICE FOR DISPLAY PANEL
CONTACTING DEVICE FOR STANDARD CHIP CARD AND SIM CARD
CONTACTING ELEMENT FOR GROUNDING A PRINTED CIRCUIT BOARD TO A CHASSIS
CONTACTING MEANS FOR VALVE DRIVES AND A VALVE ARRANGEMENT FITTED WITH IT
CONTACTING MECHANISM FOR INSTALLATION FOR ULTRASONIC DIMENSIONAL TREATMENT
CONTACTING OF ARTICLES WITH A GAS
CONTACTING PROCESS USING O-SIPOS LAYER
CONTACTING STRUCTURE WITH RESPECT TO SPHERICAL BUMP
CONTACTING SYSTEM FOR ELECTRICAL DEVICES
CONTACTING SYSTEM OF A FLAT ANTENNA CONDUCTOR STRUCTURE
CONTACTING SYSTEM OR READER FOR CHIP CARDS
CONTACTING THICKNESS GAUGE FOR MOVING SHEET MATERIAL
CONTACTING UNIT FOR A CARD-SHAPED CARRIER ELEMENT OF ELECTRONIC MODULES, ESPECIALLY ACCORDING WITH PCMCIA STANDARDS
CONTACTING UNIT FOR CARD-SHAPED SUPPORT ELEMENTS FOR ELECTRONIC COMPONENTS
CONTACTING-MAKING SYSTEM FOR TWO PRINTED CIRCUIT BOARDS
CONTACTLESS ACCELERATION SWITCH
CONTACTLESS ACCESS TICKET AND METHOD FOR MAKING SAME
CONTACTLESS ACOUSTIC SENSING SYSTEM WITH DETECTOR ARRAY SCANNING AND SELF-CALIBRATING
CONTACTLESS ACOUSTIC SENSING SYSTEM WITH DETECTOR ARRAY SCANNING AND SELF-CALIBRATION
CONTACTLESS AIR TURN GUIDE WITH BAFFLES FOR RUNNING WEBS
CONTACTLESS ARRAY CONFIGURATION FOR SEMICONDUCTOR MEMORIES
CONTACTLESS BADGE READER
CONTACTLESS BATTERY CHARGER
CONTACTLESS BATTERY CHARGER WITH WIRELESS CONTROL LINK
CONTACTLESS BATTERY CHARGING SYSTEM
CONTACTLESS BATTERY CHARGING SYSTEM WITH HIGH VOLTAGE CABLE
CONTACTLESS BONDING TOOL HEATER
CONTACTLESS CAPACITOR-COUPLED BIPOLAR ACTIVE PIXEL SENSOR WITH INTEGRATED ELECTRONIC SHUTTER
CONTACTLESS CARD AUTOMATIC CHECK-IN CHECK-OUT DEVICE
CONTACTLESS CARD COMPRISING INHIBITING MEANS | CONTACTLESS CARPET SEAM IRON
CONTACTLESS CHANNEL WRITE/ERASE FLASH MEMORY CELL AND ITS FABRICATION METHOD
CONTACTLESS CHIP CARD
CONTACTLESS CHIP CARD ASSOCIATED WITH RF TRANSMISSION MEANS
CONTACTLESS COAXIAL WINDING TRANSFORMER POWER TRANSFER SYSTEM
CONTACTLESS COMMUNICATION DATA CARRIER WITH FULLY ENCLOSED HOLDING MEANS FOR HOLDING A CHIP AND A PASSIVE COMPONENT
CONTACTLESS COMMUNICATION SYSTEM
CONTACTLESS COMMUNICATION SYSTEM FOR EXCHANGING DATA
CONTACTLESS CONDUCTIVITY DETECTOR WITH TRANSMITTER/RECEIVER ELECTRODE
CONTACTLESS CONNECTORS FOR USE IN A HIGH FREQUENCY ALTERNATING CURRENT POWER DISTRIBUTION SYSTEM
CONTACTLESS CORONA-OXIDE-SEMICONDUCTOR Q-V MOBILE CHARGE MEASUREMENT METHOD AND APPARATUS
CONTACTLESS COUPLING BETWEEN A HOST UNIT AND A SMART CARD
CONTACTLESS DATA CARRIER
CONTACTLESS DATA PROCESSING APPARATUS
CONTACTLESS DATA TRANSMISSION AND RECEIVING DEVICE WITH A SYNCHRONOUS DEMODULATOR
CONTACTLESS DATA TRANSMISSION DEVICE
CONTACTLESS DATA/POWER BUS
CONTACTLESS DIGITAL POWER TRANSMISSION AND RECEPTION SYSTEM IN A RADIO TELEPHONE
CONTACTLESS EDDY CURRENT BRAKE FOR CARS
CONTACTLESS ELECTRICAL ENERGY TRANSMISSION SYSTEM
CONTACTLESS ELECTRICAL MEASUREMENT DEVICE INCLUDING A MAGNETIZABLE PLASTIC COIL BODY FOR A CURRENT-CARRYING COIL
CONTACTLESS ELECTRICAL THIN OXIDE MEASUREMENTS
CONTACTLESS ELECTRONIC CONTROL SYSTEM FOR MODULAR MOTORIZED WHEEL HUB
CONTACTLESS ELECTRONIC MEMORY CARD
CONTACTLESS ELECTRONIC MODULE WITH SELF-SUPPORTING METAL COIL
CONTACTLESS ENERGY TRANSFER APPARATUS
CONTACTLESS EXTRUSION APPARATUS
CONTACTLESS FIELD SPIDER WITH HALL EFFECT SENSOR FOR DETECTING ROTATION OF AN ENCLOSED INNER TRANSMISSION COMPONENT TRANSMISSION
CONTACTLESS FLASH EPROM USING POLY SILICON ISOLATION
CONTACTLESS FLASH EPROM USING POLY SILICON ISOLATION AND PROCESS OF MAKING THE SAME
CONTACTLESS FLASH MEMORY WITH BURIED DIFFUSION BIT/VIRTUAL GROUND LINES
CONTACTLESS FLASH MEMORY WITH SHARED BURIED DIFFUSION BIT LINE ARCHITECTURE
CONTACTLESS GUIDE SYSTEM FOR CONTINUOUS WEB
CONTACTLESS GUIDED POSITIONING TABLE
CONTACTLESS HALL EFFECT PUSH BUTTON SWITCH
CONTACTLESS HANDLING OF OBJECTS
CONTACTLESS HEATER FLOATING ZONE REFINING AND CRYSTAL GROWTH
CONTACTLESS HEATING FREQUENCY HEATING OF THIN FILAMENTS
CONTACTLESS HERMETIC PUMP
CONTACTLESS IC CARD
CONTACTLESS IC CARD COMMUNICATION SYSTEM AND RELATED METHOD
CONTACTLESS IC CARD SYSTEM
CONTACTLESS IC CARD, RESPONDING METHOD, AND PROGRAM THEREFOR
CONTACTLESS IDENTIFICATION AND COMMUNICATION SYSTEM AND METHOD OF OPERATING THE SAME
CONTACTLESS IDENTIFICATION SYSTEM, METHOD OF CONTACTLESS IDENTIFICATION, AND ANTENNA COIL
CONTACTLESS IGNITION SYSTEM FOR INTERNAL COMBUSTION ENGINE
CONTACTLESS INDUCTANCE JOYSTICK SWITCH
CONTACTLESS INDUCTIVE DATA-TRANSMISSION SYSTEM
CONTACTLESS INTEGRATED CIRCUIT CARD WITH A CONDUCTIVE POLYMER ANTENNA
CONTACTLESS INTEGRATED CIRCUIT COMPRISING A CHARGE PUMP
CONTACTLESS INTEGRATED CIRCUIT COMPRISING A WIRED LOGIC ANTICOLLISION CIRCUIT
CONTACTLESS INTEGRATED-CIRCUIT CARD COMPRISING INHIBITING MEANS
CONTACTLESS INTERCONNECTION SYSTEM
CONTACTLESS INTERROGATION OF SENSORS FOR SMART STRUCTURES
CONTACTLESS LINEAR ANGULAR POSITION SENSOR HAVING AN ADJUSTABLE FLUX CONCENTRATOR FOR SENSITIVITY ADJUSTMENT AND TEMPERATURE COMPENSATION
CONTACTLESS LINKING DEVICE FOR INTERCONNECTING DATA BUS SECTIONS
CONTACTLESS LOCAL INTERCONNECT PROCESS UTILIZING SELF-ALIGNED SILICIDE
CONTACTLESS MAGNET-ACTIVATED PROPORTIONAL CONTROLLER
CONTACTLESS MAGNETIC SLIP RING
CONTACTLESS MAGNETIC SPIRAL GEAR AND VARIANTS THEREOF
CONTACTLESS MASS MOVING SYSTEM
CONTACTLESS MEASUREMENT OF THE ELECTRICAL RESISTANCE PER UNIT LENGTH OF FILAMENTS
CONTACTLESS METHOD AND SYSTEM FOR DETERMINING STATIC AND DYNAMIC CHARACTERISTICS OF TARGET OBJECTS
CONTACTLESS METHOD FOR MEASURING TOTAL CHARGE OF AN INSULATING LAYER ON A SUBSTRATE USING CORONA CHARGE
CONTACTLESS METHOD FOR MEASURING TOTAL CHARGE OF AN OXIDE LAYER ON A SEMICONDUCTOR WAFER USING CORONA CHARGE
CONTACTLESS MICROCIRCUIT CARD
CONTACTLESS NON-VOLATILE MEMORY ARRAY CELLS
CONTACTLESS NONVOLATILE SEMICONDUCTOR MEMORY DEVICE HAVING BURIED BIT LINES SURROUNDED BY GROOVED INSULATORS
CONTACTLESS NOR-TYPE MEMORY ARRAY AND ITS FABRICATION METHODS
CONTACTLESS OR HYBRID CONTACT-CONTACTLESS SMART CARD DESIGNED TO LIMIT THE RISKS OF FRAUD
CONTACTLESS POINT DETECTION SYSTEM FOR RAILROAD SWITCH
CONTACTLESS POSITION AND DISPLACEMENT MEASURING DEVICE
CONTACTLESS POSITION SENSOR WITH OPTIMIZED MAGNETIC VOLUME AND MAGNETO SENSITIVE PROBE
CONTACTLESS POTENTIOMETER AND DEVICE FOR CONTACTLESSLY SENSING A POSITION OF AN OBJECT
CONTACTLESS POWER DISTRIBUTION SYSTEM
CONTACTLESS POWER SUPPLY
CONTACTLESS POWER SYSTEM
CONTACTLESS POWER TRANSFER SYSTEM FOR A ROTATIONAL LOAD
CONTACTLESS POWER TRANSMITTING SYSTEM AND CONTACTLESS CHARGING SYSTEM
CONTACTLESS PRESSURIZING-GAS SHAFT SEAL
CONTACTLESS PROXIMITY AUTOMATED DATA COLLECTION SYSTEM AND METHOD
CONTACTLESS PROXIMITY AUTOMATED DATA COLLECTION SYSTEM AND METHOD WITH COLLISION RESOLUTION
CONTACTLESS PROXIMITY SWITCH
CONTACTLESS REAL-TIME IN-SITU MONITORING OF A CHEMICAL ETCHING
CONTACTLESS REAL-TIME IN-SITU MONITORING OF A CHEMICAL ETCHING PROCESS
CONTACTLESS ROTATIONAL SPEED MEASUREMENT ARRANGEMENT UTILIZING RADICALLY ALIGNED ROTATING MAGNETS
CONTACTLESS SAFETY SWITCH
CONTACTLESS SEAL
CONTACTLESS SENSOR DRIVEN BY SINGLE POWER SUPPLY
CONTACTLESS SHEET RESISTANCE MEASUREMENT METHOD AND APPARATUS
CONTACTLESS SIGNALING DEVICE
CONTACTLESS SLIDE GUIDE FOR ELEVATORS
CONTACTLESS SMART CARD HIGH PRODUCTION ENCODING MACHINE
CONTACTLESS SMART CARD THE ELECTRONIC CIRCUIT OF WHICH COMPRISES A MODULE
CONTACTLESS SMARTCARD FOR USE IN CELLULAR TELEPHONE
CONTACTLESS SPEED OR POSITION SENSOR USING A DIFFERENTIAL HALL SENSOR
CONTACTLESS STALK MOUNTED CONTROL SWITCH
CONTACTLESS SWITCH
CONTACTLESS SWITCHING AND ENCODING
CONTACTLESS SWITCHING DEVICE FOR AN ELEVATOR SAFETY CHAIN
CONTACTLESS SYSTEM FOR DETECTING MICRODEFECTS ON ELECTROSTATOGRAPHIC MEMBERS
CONTACTLESS SYSTEM FOR DETECTING SUBTLE SURFACE POTENTIAL CHARGE PATTERNS
CONTACTLESS TECHNIQUE FOR MEASURING EPITAXIAL DOPANT CONCENTRATION PROFILES IN SEMICONDUCTOR WAFERS
CONTACTLESS TEST METHOD AND SYSTEM FOR TESTING PRINTED CIRCUIT BOARDS
CONTACTLESS TEST METHOD FOR TESTING PRINTED CIRCUIT BOARDS
CONTACTLESS TESTING OF ELECTRONIC MATERIALS AND DEVICES USING MICROWAVES
CONTACTLESS TESTING OF INPUTS AND OUTPUTS OF INTEGRATED CIRCUITS
CONTACTLESS THICKNESS MEASURING APPARATUS AND MEASURING METHOD FOR THE SAME
CONTACTLESS TOTAL CHARGE MEASUREMENT WITH CORONA
CONTACTLESS TRANSDUCER STIMULATION AND SENSING OF OSSICULAR CHAIN
CONTACTLESS ULTRASONIC DEVICE FOR DIMENSIONAL INSPECTION
CONTACTLESS UNIFORM-TUNNELING SEPARATE P-WELL (CUSP) NON-VOLATILE MEMORY ARRAY ARCHITECTURE, FABRICATION AND OPERATION
CONTACTLESS VEHICLE LAMP SWITCH
CONTACTLESS WHEEL MEASUREMENT SYSTEM AND METHOD
CONTACTLESS, 5V, HIGH SPEED EPROM/FLASH EPROM ARRAY UTILIZING CELLS PROGRAMMED USING SOURCE SIDE INJECTION
CONTACTLESS, TRANSFORMER-BASED MEASUREMENT OF THE RESISTIVITY OF MATERIALS
CONTACTLESS-IC-CARD RECEIVE AND READ-WRITE MECHANISM FOR AN ON-STREET PARKING METER
CONTACTLESSLY OPERATING ELECTRONIC RESPONDER CARD
CONTACTOR
CONTACTOR AND CONTROLLER FOR A CONTACTOR
CONTACTOR AND PRODUCTION METHOD FOR CONTRACTOR
CONTACTOR AND SEMICONDUCTOR DEVICE INSPECTING METHOD
CONTACTOR AND TRIP CIRCUIT THEREFOR
CONTACTOR ARRANGEMENT INCLUDING INDIVIDUAL CONTACTOR HOUSINGS CONNECTED BY A RESILIENT ELONGATED CONNECTOR
CONTACTOR ASSEMBLY FOR COMMON GRID ARRAY DEVICES
CONTACTOR ASSEMBLY FOR TESTING CERAMIC SURFACE MOUNT DEVICES AND OTHER ELECTRONIC COMPONENTS
CONTACTOR BLOCK AND APPARATUS FOR ELECTRICAL CONNECTION
CONTACTOR DEVICE
CONTACTOR EQUIPMENT
CONTACTOR FEEDBACK AND PRECHARGE/DISCHARGE CIRCUIT
CONTACTOR FLOATING MAGNET
CONTACTOR FLOOR THAT HOLDS AN IC PACKAGE TO CONTACTOR PINS WITHIN AN IC PACKAGE TESTING SYSTEM WITH MINIMIZED SOLDER FLAKING
CONTACTOR FOR A MOTOR VEHICLE STARTER, HAVING IMPROVED PROTECTION FOR AN ELECTRONIC CIRCUIT OF THE CONTACTOR
CONTACTOR FOR DEGASSING LIQUIDS
CONTACTOR FOR ELECTRIC PART
CONTACTOR FOR GRANULAR MATERIALS
CONTACTOR FOR INSPECTION
CONTACTOR FOR SEMICONDUCTOR DEVICE AND CONTACT METHOD
CONTACTOR FOR SEMICONDUCTOR DEVICES, A TESTING APPARATUS USING SUCH CONTACTOR, A TESTING METHOD USING SUCH CONTACTOR, AND A METHOD OF CLEANING SUCH CONTACTOR
CONTACTOR FOR TEST APPLICATIONS INCLUDING MEMBRANE CARRIER HAVING CONTACTS FOR AN INTEGRATED CIRCUIT AND PINS CONNECTING CONTACTS TO TEST BOARD
CONTACTOR FOR TESTING INTEGRATED CIRCUIT CHIPS MOUNTED IN MOLDED CARRIER RINGS
CONTACTOR HAVING CONDUCTIVE PARTICLES IN A HOLE AS A CONTACT ELECTRODE
CONTACTOR HOLDING MECHANISM AND AUTOMATIC CHANGE MECHANISM FOR CONTACTOR
CONTACTOR INTERLOCK
CONTACTOR MONITOR FOR CHARGING STATIONS
CONTACTOR OF THE DEVICE FOR TESTING SEMICONDUCTOR DEVICE
CONTACTOR SAFETY INTERLOCK MECHANISM
CONTACTOR SLEEVE ASSEMBLY FOR A PICK AND PLACE SEMICONDUCTOR DEVICE HANDLER
CONTACTOR SYSTEM FOR A BALL GRID ARRAY DEVICE
CONTACTOR WITH A FRONT MASK
CONTACTOR WITH ELASTOMER ENCAPSULATED PROBES
CONTACTOR WITH FLOATING ARMATURE
CONTACTOR WITH ISOLATED SPRING TIPS
CONTACTOR WITH MULTIPLE REDUNDANT CONNECTING PATHS
CONTACTOR WITH SOLID STATE PROTECTION CIRCUIT FOR A VAPOR COMPRESSION AIR CONDITIONER
CONTACTOR, A METHOD OF MANUFACTURING THE CONTACTOR AND A DEVICE AND METHOD OF TESTING ELECTRONIC COMPONENT USING THE CONTACTOR
CONTACTOR, METHOD FOR MANUFACTURING SUCH CONTACTOR, AND TESTING METHOD USING SUCH CONTACTOR
CONTACTOR, PARTICULARLY A VAPOUR EXCHANGER FOR THE CONTROL OF THE AIR HYGROMETRIC CONTENT, AND A DEVICE FOR AIR HANDLING
CONTACTOR/CIRCUIT BREAKER ACTIVATED BY A PIEZOELECTRIC MOTOR
CONTACTOR/CIRCUIT-BREAKER TYPE SWITCH DEVICE
CONTACTOR-CIRCUIT BREAKER
CONTACTORLESS MULTI-MOTOR CONTROLLER FOR BATTERY-POWERED VEHICLES
CONTACTS CARRIER
CONTACTS COVERED WITH ELECTRO-RESISTIVE MATERIAL ON A RADIO TELEPHONE
CONTACTS FOR A BIT LINE AND A STORAGE NODE IN A SEMICONDUCTOR DEVICE
CONTACTS FOR HIGH DENSITY ELECTRIC CONNECTOR
CONTACTS FOR HINGED CONNECTION SYSTEM
CONTACTS FOR INSULATION DISPLACEMENT CONNECTORS
CONTACTS FOR SEMICONDUCTOR DEVICES
CONTACTS MATERIAL
CONTACTS MATERIAL FOR VACUUM VALVE
CONTACTS ON AN INTEGRATED CIRCUIT CHIP
CONTACTS TO ROD SHAPED SCHOTTKY GATE FETS
CONTAINED BEVERAGE COOLING APPARATUS
CONTAINED DIRECT PARTICLE BEAM FLOW ABRASION SYSTEM
CONTAINED INSTRUMENT CLEANER FOR USE IN A CONTROLLED ENVIRONMENT
CONTAINED QUENCH SYSTEM FOR CONTROLLED COOLING OF CONTINUOUS WEB
CONTAINED SEPARATION SYSTEM FOR FCC REACTION DOWNCOMER
CONTAINER
CONTAINER ACCOMMODATING PAINT, ROLLER AND BRUSH AND LID THEREFOR
CONTAINER ADAPTED FOR SPRAYING
CONTAINER ADAPTED FOR STACKING
CONTAINER ADAPTED TO INCLUDE A LIGHT SOURCE
CONTAINER ADAPTER
CONTAINER ADAPTER FOR SEPARATING AND DISPENSING LIQUIDS
CONTAINER AND A LID FOR CLOSING THE SAME
CONTAINER AND A PROCESS FOR FILLING SAID CONTAINER
CONTAINER AND ADAPTOR FOR USE WITH FLUID VOLUME SENSOR
CONTAINER AND APPLICATOR ASSEMBLY
CONTAINER AND APPLICATOR COMBINATION
CONTAINER AND BALING DEVICE FOR PAPER AND OTHER FLAT STOCK
CONTAINER AND BLANK FOR "DUCKBILL" ELIMINATION
CONTAINER AND BLANK FOR A FLAT FOOD PRODUCT
CONTAINER AND BLANK FOR MAKING SAME
CONTAINER AND BLOW-MOLDED PRODUCT
CONTAINER AND CAP CLOSURE
CONTAINER AND CARTRIDGE FOR DISPENSING CONTROLLED AMOUNTS OF PAPER PRODUCTS
CONTAINER AND CARTRIDGE FOR DISPENSING PAPER PRODUCTS
CONTAINER AND CLOSEABLE PULL TAB
CONTAINER AND CLOSURE
CONTAINER AND CLOSURE ASSEMBLY
CONTAINER AND CLOSURE ASSEMBLY WITH TACTILE INDICATION OF CLOSURE POSITION
CONTAINER AND CLOSURE CAP
CONTAINER AND CLOSURE HAVING MEANS FOR PRODUCING AN AUDIBLE SIGNAL WHEN A SEAL HAS BEEN ESTABLISHED
CONTAINER AND CLOSURE LID
CONTAINER AND CLOSURE PACKAGE AND A METHOD OF FILLING
CONTAINER AND CLOSURE PACKAGE AND METHOD OF FILLING
CONTAINER AND CLOSURE PACKAGE AND METHOD OF MAKING SAME
CONTAINER AND CLOSURE RESEALABLE BOTTLE CAP WITH PUSH PULL CLOSURE
CONTAINER AND CLOSURE SYSTEM
CONTAINER AND CLOSURE THEREFORE HAVING CONICAL SEALING SURFACES
CONTAINER AND CLOSURE WITH ALIGNABLE HANDLE
CONTAINER AND CLOSURE WITH COOPERATING THREADED PORTIONS HAVING FASTENING CONFIGURATIONS
CONTAINER AND CLOSURE WITH DISPENSING VALVE AND SEPARATE RELEASABLE INTERNAL SHIPPING SEAL
CONTAINER AND CLOSURE WITH IN-TURNED SEAM
CONTAINER AND CLOSURE WITH NON-RISING ROTATABLE HOUSING, DISPENSING VALVE, AND SEPARATE RELEASABLE INTERNAL SHIPPING SEAL
CONTAINER AND COMBINATION PACKAGE COMPRISING SUCH CONTAINER AND A COVER
CONTAINER AND CONDIMENT CUP FOR REFRIGERATED DOUGH OR LIKE PRODUCTS
CONTAINER AND CONTAINER CARRIER WITH PISTON-CYLINDER DEVICES FOR LIFTING CONTAINERS ON TO, OFF AND ALONG THE CARRIER
CONTAINER AND CONTAINER LID ASSEMBLY WITH RETAINING RING
CONTAINER AND COUPLER ASSEMBLY FOR TRANSFERRING GRANULATED MATERIAL
CONTAINER AND DEVICES TO ASSURE STERILIZATION OF SURFACES AND DEVICES BY ELECTRIC FIELD AND STERILIZING MEDIA
CONTAINER AND DISPENSER FOR TWO BEVERAGES
CONTAINER AND DISPENSER SYSTEM FOR FLOWABLE SOLIDS
CONTAINER AND DISPENSING CLOSURE LID HAVING A TEAR-AWAY TAB
CONTAINER AND DISPENSING SYSTEM FOR LIQUID CHEMICALS
CONTAINER AND DISPLAY SYSTEM INCORPORATING THE CONTAINER
CONTAINER AND END CLOSURE ADAPTED FOR EVACUATING AND BACK-FLUSHING OF GASES DURING CLOSING
CONTAINER AND EXPANDABLE COOLER
CONTAINER AND FILLED FOOD PRODUCT ASSEMBLY
CONTAINER AND FLEXIBLE TUBE MANUFACTURED WITH A DETACHABLE COVER THAT IS REUSABLE AS A CAP
CONTAINER AND FOLDABLE PANEL EMPLOYING A PLURALITY OF GAS POCKETS
CONTAINER AND HEAT-RESISTANT CAP FOR USE WITH SAME
CONTAINER AND INVENTORY MONITORING METHODS AND SYSTEMS
CONTAINER AND ITS ASSOCIATED BRUSH FOR APPLYING MASCARA
CONTAINER AND KIT FOR PROTECTION AND DISPLAY OF COLLECTIBLE ITEMS
CONTAINER AND LID APPARATUS
CONTAINER AND LID ASSEMBLY
CONTAINER AND LID FOR CONTAINER
CONTAINER AND LINER COMBINATION HAVING INTERLOCKING FEATURE FOR STORING SHEET OF PHOTOSENSITIVE MATERIAL, LINER AND METHOD FOR LOADING SUCH SHEETS INTO A CONTAINER AND WITH SUCH A CONTAINER LINER COMBINATION
CONTAINER AND LIQUID DISPENSING APPARATUS AND METHOD OF APPLICATION THEREOF
CONTAINER AND LOCK FOR A BAG FLUID FITTING
CONTAINER AND LOCKING DEVICE
CONTAINER AND LOCKING LID
CONTAINER AND LOLLIPOP COMBINATION
CONTAINER AND MEASURING/DISPENSING CAP ASSEMBLY
CONTAINER AND METHOD
CONTAINER AND METHOD FOR ABSORBING AND REDUCING HYDROGEN CONCENTRATION
CONTAINER AND METHOD FOR CROSS-LINKING COMPOSITE MATERIALS ON DENTAL PROSTHESIS | CONTAINER AND METHOD FOR DISPENSING MOTOR OIL AND OTHER LIQUIDS
CONTAINER AND METHOD FOR DISPENSING SEALED ARTICLES
CONTAINER AND METHOD FOR FILLING BATTERIES WITH ELECTROLYTE
CONTAINER AND METHOD FOR FORMING THE SAME
CONTAINER AND METHOD FOR HIGH VOLUME TREATMENT OF SAMPLES ON SOLID SUPPORTS
CONTAINER AND METHOD FOR MAKING CONTAINER FOR FRAGILE PRODUCTS
CONTAINER AND METHOD FOR PACKAGING CONTOURED ARTICLES
CONTAINER AND METHOD FOR PREVENTING LEAKAGE THEREFROM THROUGH ISOLATING DEFORMATION IN THE CONTAINER
CONTAINER AND METHOD FOR REFRIGERATING A PRODUCT
CONTAINER AND METHOD FOR RELAXING SNAGS DURING DISPENSEMENT OF STRIP MATERIAL
CONTAINER AND METHOD FOR SEALING THE CONTAINER
CONTAINER AND METHOD FOR STORING AND DELIVERING MINIMALLY-INVASIVE HEART VALVES
CONTAINER AND METHOD FOR STORING CHILDREN'S CLOTHES
CONTAINER AND METHOD FOR TRANSPORTING A SYRINGE CONTAINING RADIOACTIVE MATERIAL
CONTAINER AND METHOD FOR TRANSPORTING FINELY DIVIDED OR DRIED COAL
CONTAINER AND METHOD FOR TRANSPORTING LABORATORY ANIMALS
CONTAINER AND METHOD FOR TRANSPORTING LIVE CRUSTACEANS
CONTAINER AND METHOD OF AND APPARATUS FOR NOTCHING THE SAME
CONTAINER AND METHOD OF FORMING
CONTAINER AND METHOD OF FORMING THE CONTAINER
CONTAINER AND METHOD OF GROWING A PLANT
CONTAINER AND METHOD OF MAKING CONTAINER FROM POLYETHYLENE NAPHTHALATE AND COPOLYMERS THEREOF
CONTAINER AND METHOD OF MAKING SAME
CONTAINER AND METHOD OF MAKING THE SAME
CONTAINER AND METHOD OF MANUFACTURE
CONTAINER AND METHOD OF MANUFACTURING A CONTAINER
CONTAINER AND METHOD OF MANUFACTURING SAME FROM A WEB OF FLEXIBLE MATERIAL
CONTAINER AND METHOD OF MANUFACTURING THE SAME
CONTAINER AND ORGANIZER
CONTAINER AND PACKAGE FOR TRANSPORTING TEMPERATURE SENSITIVE SAMPLES
CONTAINER AND PICKUP ASSEMBLY FOR COLLECTION OF RECYCLABLE MATERIALS
CONTAINER AND PLASTIC THREADLESS CLOSURE MEMBER
CONTAINER AND PLUG FOR CONTAINER
CONTAINER AND PRESSURE SEALING CLOSURE COMBINATION
CONTAINER AND PROCESS FOR ITS MANUFACTURE
CONTAINER AND PROCESS FOR MONITORING AND RECORDAL OF PRODUCT INFORMATION
CONTAINER AND PUMP ASSEMBLY
CONTAINER AND REFERENCE ELECTRODE FOR USE IN RADIATED AQUEOUS ENVIRONMENTS
CONTAINER AND RETAINING APPARATUS
CONTAINER AND RETRACTABLE HANGER SYSTEM
CONTAINER AND SEALING DEVICE FOR USE IN THE CONTAINER
CONTAINER AND STAND FOR LIQUIDS
CONTAINER AND STOPPER ASSEMBLY LOCKED TOGETHER BY RELATIVE ROTATION AND USE THEREOF
CONTAINER AND SUPPORTING MEMBER FOR MEMORY DISKS
CONTAINER AND SYSTEM FOR COLLECTION AND RECYCLING USED MOTOR OIL
CONTAINER AND TAG ASSEMBLY
CONTAINER AND TAGS
CONTAINER AND TAMPER-EVIDENT CLOSURE
CONTAINER AND TESTING DEVICE FOR SPORT BALLS
CONTAINER AND THE MANUFACTURE THEREOF
CONTAINER AND TRAY ASSEMBLY
CONTAINER AND TRAY COMBINATION FOR MAINTENANCE OF AN ELEVATED OR DEPRESSED TEMPERATURE IN A FOOD PRODUCT
CONTAINER AND TWO PIECE SAFETY CAP HAVING A LOCKING COLLAR AND COVER
CONTAINER AND VALVED CLOSURE
CONTAINER AND VEHICLE COMBINATION AND A METHOD FOR CARRYING SPORTING EQUIPMENT AND CLOTHES
CONTAINER AND/OR CLOSURE THEREFOR
CONTAINER APPARATUS
CONTAINER APPARATUS AND METHOD FOR CONVERTING A SHIPPING CONTAINER INTO ONE OR MORE DISPLAY TRAYS
CONTAINER APPARATUS FOR FLUID MATERIAL
CONTAINER APPARATUS FOR FOOD
CONTAINER APPARATUS FOR SUBSTANCES SOLUBLE IN FLUID MEDIA AND METHOD FOR THE PREPARATION OF MIXTURES IN SITU
CONTAINER APPARATUS HAVING DETACHABLE AND DISCARDABLE WALL SECTIONS
CONTAINER ARRANGEMENT AND METHOD FOR TRANSPORTING EQUINE SEMEN
CONTAINER ASSEMBLIES
CONTAINER ASSEMBLIES OF DIFFERENT SIZES WHICH STACK, NEST AND ASSEMBLE SEPARATELY AND IN COMBINATON
CONTAINER ASSEMBLIES WITH ADDITIVE CUPS
CONTAINER ASSEMBLY
CONTAINER ASSEMBLY AND BOTTOM CAP THEREFOR
CONTAINER ASSEMBLY AND CONTAINER UNIT
CONTAINER ASSEMBLY AND METHOD OF MAKING THE SAME
CONTAINER ASSEMBLY AND NESTING SET THEREOF
CONTAINER ASSEMBLY FOR DISPENSING NON-ATOMIZED COMPOSITION MIXED INTERNALLY UPON DISPENSING
CONTAINER ASSEMBLY FOR FLOWABLE MATERIALS
CONTAINER ASSEMBLY FOR FOOD
CONTAINER ASSEMBLY FOR INTRAVAGINAL FERTILIZATION AND CULTURE AND EMBRYO TRANSFER AND METHOD OF INTRAVAGINAL FERTILIZATION AND CULTURE EMPLOYING SUCH A CONTAINER
CONTAINER ASSEMBLY FOR MIXING LIQUIDS IN PREDETERMINED RATIOS
CONTAINER ASSEMBLY FOR PERFUME BOTTLES
CONTAINER ASSEMBLY FOR PLASTIC BOTTLES AND THE LIKE
CONTAINER ASSEMBLY FOR STORING AND SHIPPING SUBSTANTIALLY FLAT ARTICLES AND THE LIKE
CONTAINER ASSEMBLY FOR TRANSPORT AND DISPOSAL OF MEDICAL MATERIALS
CONTAINER ASSEMBLY FOR USE WITH A RAPID TRANSFER PORT
CONTAINER ASSEMBLY FOR WARMING BEVERAGES AND METHOD OF FORMING AND USING IT
CONTAINER ASSEMBLY FOR WASTE
CONTAINER ASSEMBLY HAVING A COVER CAP PROVIDED WITH A PUMP MEMBER TO PUMP OUT AIR FROM A CONTAINER
CONTAINER ASSEMBLY HAVING A REMOVABLE INSERT/DIVIDER
CONTAINER ASSEMBLY HAVING SNAP-FIT CONTAINER CONNECTION
CONTAINER ASSEMBLY MACHINE
CONTAINER ASSEMBLY PROVIDED WITH ANITBACTERIAL AGENT AGAINST SLOW-LEAK BACTERIA
CONTAINER ASSEMBLY WITH IMPROVED CONTAINER CONNECTION
CONTAINER ASSEMBLY WITH MOVABLE SPOUT
CONTAINER ASSEMBLY WITH TAMPER EVIDENT SEAL
CONTAINER ATTACHABLE SPRAY TUBE HOLDER
CONTAINER ATTACHMENT
CONTAINER ATTACHMENT DEVICE
CONTAINER ATTACHMENT DEVICE AND METHOD OF USE
CONTAINER BAG
CONTAINER BAG FOR A CLOSED FILL SYSTEM
CONTAINER BASE
CONTAINER BASE CUP HAVING REDUCED HEAT GAIN
CONTAINER BASE STRUCTURE RESPONSIVE TO VACUUM RELATED FORCES
CONTAINER BASE WITH A FLOOR PANEL TILTING MEANS
CONTAINER BASE WITH THREE PERPENDICULAR FIXING ELEMENTS IN THE CORNERS
CONTAINER BASKET
CONTAINER BLANK ERECTER AND FEEDER
CONTAINER BODY FOR RECYCLABLE REFUSE COLLECTION VEHICLE
CONTAINER BODY INKING APPARATUS
CONTAINER BOTTOM CONFIGURATION FOR IMPROVED SUBMERSIBILITY IN ICE
CONTAINER BOTTOM WALL REFORMING APPARATUS AND METHOD
CONTAINER BOTTOM WITH ELEVATIONS MADE OF A POLYMERIC MATERIAL AND A PROCESS FOR PRODUCTION THEREOF
CONTAINER BOX
CONTAINER BOX AND LIFTER FEATURES
CONTAINER BOX STRUCTURE IN TWO-WHEELED MOTOR VEHICLE
CONTAINER BULKHEAD ASSEMBLY
CONTAINER CADDY HAVING FOOT ACTIVATED SLIDING TOP CONTROL
CONTAINER CAP
CONTAINER CAP AND ASSEMBLY FOR SIPPING LIQUIDS
CONTAINER CAP AND LIQUID COMMUNICATION ADAPTER
CONTAINER CAP AND SYSTEM
CONTAINER CAP ASSEMBLY HAVING AN ENCLOSED PENETRATOR
CONTAINER CAP DISPENSING APPARATUS
CONTAINER CAP FOR DRINKING CONTAINERS HAVING A VALVE BODY INSERT WITH A DEFORMABLE SEALING LIP
CONTAINER CAP FOR PHOTOGRAPHIC FILM CARTRIDGE
CONTAINER CAP HAVING EXTERNAL BEAD
CONTAINER CAP HAVING INTEGRAL POUR SPOUT
CONTAINER CAP HAVING MEANS FOR EVIDENCING CRAFTY UNCAPPING OR SAFE SEALING
CONTAINER CAP INCLUDING A PRIMARY CAP AND A SECONDARY CAP JOINED BY A HINGE
CONTAINER CAP MEDICATION REMINDER
CONTAINER CAP PROVIDED WITH IDENTIFICATION MARK
CONTAINER CAP REMOVER
CONTAINER CAP WITH A DETACHABLE FOLDING UTENSIL
CONTAINER CAP WITH A MEASURING SPOUT
CONTAINER CAP WITH DOUBLE FUNCTION RING
CONTAINER CAP WITH INTERLOCKED SAFETY CLOSURE
CONTAINER CAP WITH LIQUID-DISSOLVABLE ADDITIVE
CONTAINER CAP WITH LOCKING COVER
CONTAINER CAP WITH REMOVABLE INSERT
CONTAINER CAP WITH SPRING LOADED COVER
CONTAINER CAPABLE OF BEING ASSEMBLED BY INTERLOCKING CONNECTIONS
CONTAINER CAPABLE OF BEING EVACUATED BY ROTATING A CAP MEMBER THEREOF
CONTAINER CAPABLE OF DISASSEMBLY INTO AN INTEGRAL UNIT FOLLOWING USE
CONTAINER CAPABLE OF MAINTAINING ITS COMPRESSED STATE IN A LONGITUDINAL DIRECTION AND COMPRESSION METHOD THEREOF
CONTAINER CAPABLE OF SEPARATELY STORING AND MIXING TWO SUBSTANCES TOGETHER
CONTAINER CAPACITOR
CONTAINER CAPACITOR ARRAY HAVING A COMMON TOP CAPACITOR PLATE
CONTAINER CAPACITOR STRUCTURE
CONTAINER CAPACITOR STRUCTURE AND METHOD OF FORMATION THEREOF
CONTAINER CAPACITOR WITH INCREASED SURFACE AREA AND METHOD FOR MAKING SAME
CONTAINER CAPACITY CONTROL SYSTEM
CONTAINER CARRIER
CONTAINER CARRIER ADAPTED FOR USE WITH ADHESIVE HANDLE
CONTAINER CARRIER WITH DIFFERENT COEFFICIENTS OF FRICTION
CONTAINER CARRIER WITH TOP LIFT HANDLE
CONTAINER CARRIER, BASE AND ADVERTISING/PROMOTIONAL TRANSPORT
CONTAINER CARRIERS
CONTAINER CARRYING APPARATUS
CONTAINER CASE FOR CARD TYPE DEVICE, CONTAINER CASE HOLDER, AND ELECTRONIC DEVICE USING SUCH CARD TYPE DEVICE
CONTAINER CASE FOR MAGNETIC TAPE CASSETTE
CONTAINER CASING FOR DISC-SHAPED RECORDING MEDIUM
CONTAINER CENTRIFUGAL DRYING DEVICE
CONTAINER CHARGER
CONTAINER CHASSIS POSITIONING SYSTEM
CONTAINER CHEMICAL GUARD
CONTAINER CLAMPING DEVICE
CONTAINER CLAMPING RING WITH IMPROVED LEVER AND THUMB LATCH
CONTAINER CLEANING AND DISINFECTING APPARATUS UTILIZING OZONE
CONTAINER CLEANING APPARATUS AND METHOD
CONTAINER CLEANING SPATULA
CONTAINER CLEANING SYSTEM USING IONIZED AIR FLOW
CONTAINER CLEANING, DRAINING AND DRYING APPARATUS
CONTAINER CLIP
CONTAINER CLOSURE
CONTAINER CLOSURE AND LOCKING SYSTEM
CONTAINER CLOSURE AND METHOD OF USE
CONTAINER CLOSURE AND POURING APPARATUS
CONTAINER CLOSURE APPARATUS
CONTAINER CLOSURE ARRANGEMENT
CONTAINER CLOSURE ASSEMBLY
CONTAINER CLOSURE ASSEMBLY INCLUDING BARRIER LAYER WITH A CRYSTALLIZED, BRITTLE WEAKENED PORTION
CONTAINER CLOSURE ASSEMBLY WITH PROFILED SCREW THREADS
CONTAINER CLOSURE CAPS AND COMPOSITIONS FOR FORMING GASKETS FOR THEM
CONTAINER CLOSURE CONTAINING GAME PIECE
CONTAINER CLOSURE DEVICE
CONTAINER CLOSURE FLAP ARRANGEMENT
CONTAINER CLOSURE FLOW CONTROL
CONTAINER CLOSURE FOR FLEXIBLE CONTAINERS
CONTAINER CLOSURE HAVING A FRANGIBLE SEAL
CONTAINER CLOSURE HAVING METALLIC BODY AND PLASTIC GRIP PIECE
CONTAINER CLOSURE HAVING PERIPHERAL TAMPER-INDICATOR
CONTAINER CLOSURE HAVING PULL-OPENING TAB
CONTAINER CLOSURE LOCKING ASSEMBLY
CONTAINER CLOSURE OF MEDICAL TESTS
CONTAINER CLOSURE SYSTEM
CONTAINER CLOSURE SYSTEM HAVING A CAP REMOVABLE WITH LESS THAN A 45.DEGREE. TWIST
CONTAINER CLOSURE SYSTEM WITH INNER SEAL IN CAP
CONTAINER CLOSURE SYSTEM WITH WARRANTY ELEMENT
CONTAINER CLOSURE WHICH CONVERTS FROM A CHILD RESISTANT TO A NON-CHILD RESISTANT CONFIGURATION
CONTAINER CLOSURE WITH A FRANGIBLE SEAL AND A CONNECTOR FOR A FLUID TRANSFER DEVICE
CONTAINER CLOSURE WITH A PLASTIC LINER HAVING PROJECTIONS EXTENDING INTO DEPRESSIONS IN THE PLASTIC SHELL
CONTAINER CLOSURE WITH A REINFORCED RESILIENT BLADE
CONTAINER CLOSURE WITH A RETRACTABLE TURNSPOUT
CONTAINER CLOSURE WITH DOUBLE-AXIS RESILIENTLY-BIASING WEB-HINGE STRUCTURE
CONTAINER CLOSURE WITH EXTERNAL RIBS
CONTAINER CLOSURE WITH FRANGIBLE BRIDGES
CONTAINER CLOSURE WITH HORIZONTAL AND VERTICAL SEALS
CONTAINER CLOSURE WITH LINER
CONTAINER CLOSURE WITH MULTIPLE LINER SEALS
CONTAINER CLOSURE WITH ORIGINALITY RING
CONTAINER CLOSURE WITH OUTFLOW TUBE
CONTAINER CLOSURE WITH RIBBED ENLARGED GRASPING REGION
CONTAINER CLOSURE WITH SEPARABLE WALL SEGMENTS
CONTAINER CLOSURE WITH TAMPER EVIDENT BAND
CONTAINER CLOSURE WTH LINER AND METHOD OF PRODUCING THE SAME
CONTAINER CLOSURE, AND METHOD FOR PRODUCING SAME
CONTAINER CLOSURES
CONTAINER CLOSURES AND PROCESSES OF MAKING THEM
CONTAINER CLOSURES, SEALED CONTAINERS AND SEALING COMPOSITIONS FOR THEM
CONTAINER COATING FOR INCREASING PRODUCT OUTAGE
CONTAINER COIL HAVING MULTIPLE DISCREET COMPARTMENTS
CONTAINER COMBINATION AND A MEHTOD OF HANDLING CONTAINERS
CONTAINER COMBINATION FOR STATIONERY GOODS
CONTAINER COMPARTMENT IN PARTICULAR FOR REFRIGERATORS AND SIMILAR HOUSEHOLD ELECTRICAL APPLIANCES
CONTAINER COMPOSED OF A SATURATED POLYESTER RESIN COMPOSITION
CONTAINER COMPRISING A BASE AND AN UPSTANDING PERIPHERAL WALL EXTENDING UPWARDLY FROM SAID BASE TO AN APEX
CONTAINER COMPRISING A CONTAINER BODY PART AND A FRONT WALL CONNECTED THERETO
CONTAINER COMPRISING A FLEXIBLE INTERNAL PART
CONTAINER COMPRISING A FORGED STEEL BODY OF NON-CIRCULAR CROSS-SECTION FOR NUCLEAR FUEL ASSEMBLIES
CONTAINER COMPRISING A RELATIVELY STIFF, FORM-RETAINING SUPPORTING FRAME AND A FLEXIBLE SHELL MEMBER ARRANGED THEREIN
CONTAINER COMPRISING BIAXIALLY ORIENTED POLYSTYRENE COMPOSITION AND RUBBER PARTICLES
CONTAINER COMPRISING FOAMED OLEFIN RESIN AND PROCESS FOR PRODUCING SAME
CONTAINER CONSISTING OF A PLURALITY OF PLATES
CONTAINER CONSTRUCTION
CONTAINER CONTAINING CONTRAST AGENTS
CONTAINER CONTAINING LIQUID OR THE LIKE THEREIN
CONTAINER CONTENT OR ARTICLE MARKING DEVICE
CONTAINER CONTENT REMOVAL DEVICE
CONTAINER CONTENTS UNLOADING APPARATUS FOR UNLOADING CONTENTS OF A CONTAINER AND METHOD OF UNLOADING SAME
CONTAINER CONTENTS VERIFICATION
CONTAINER CONVERTIBLE BETWEEN A LIDDED SHOPPING BAG AND A PACKAGE VARIOUSLY SUITABLE AS GIFT WRAP OR FOR MAILING
CONTAINER CONVERTIBLE BETWEEN SHIPPING AND SHIPPING/DISPLAY MODES
CONTAINER CONVERTIBLE FOR USE AS A PLANT PROTECTION COVER
CONTAINER CONVERTIBLE INTO AIR CUSHION SUPPORT
CONTAINER CONVEYING APPARATUS
CONTAINER CONVEYING INSTALLATION FOR PREPARING SETS OF OBJECTS
CONTAINER CONVEYOR FOR CONVEYING A CONTAINER TO AN INSPECTING STATION
CONTAINER CONVEYOR SYSTEM
CONTAINER COOLER APPARATUS
CONTAINER COOLING JACKET AND PRE-CHILL DISPENSING SYSTEM THEREFOR
CONTAINER CORNER SECTION GLUE BOND TESTER
CONTAINER CORNER STRUCTURE AND CONTAINER BLANK TOGETHER WITH A METHOD OF FORMING A CONTAINER CORNER STRUCTURE
CONTAINER COUPLING DEVICE |
|
Inventions Browse
Copyright © Philip M. Parker, INSEAD. Terms of Use.