Copyright © Philip M. Parker, INSEAD. Terms of Use.
| CONSTANT-VELOCITY JOINT
CONSTANT-VELOCITY JOINT WITH AN AXIALLY RETAINED TRIPOD
CONSTANT-VELOCITY UNIVERSAL JOINT FOR PROPELLER SHAFT
CONSTANT-VELOCITY UNIVERSAL JOINT OF A TRIPOD TYPE
CONSTANT-VELOCITY-RATIO UNIVERSAL JOINTS
CONSTANT-VOLTAGE AUTOMATIC CHARGING STROBE CIRCUIT
CONSTANT-VOLTAGE CIRCUIT CAPABLE OF PREVENTING AN OVERSHOOT AT A CIRCUIT OUTPUT TERMINAL
CONSTANT-VOLTAGE CLAMPING FORWARD CONVERSION SWITCHING POWER SUPPLY
CONSTANT-VOLTAGE DIODE FOR OVER-VOLTAGE PROTECTION
CONSTANT-VOLTAGE GENERATING CIRCUIT
CONSTANT-VOLTAGE GENERATING DEVICE
CONSTANT-VOLTAGE GENERATION CIRCUIT
CONSTANT-VOLTAGE POWER SUPPLY CIRCUIT
CONSTANT-VOLTAGE POWER SUPPLY CIRCUIT WITH A CURRENT LIMITING CIRCUIT
CONSTANT-VOLTAGE SUPPLY SYSTEM WITH SEVERAL CONSTANT-VOLTAGE SOURCES
CONSTANT-VOLUME DISPENSING COATING CONTAINER
CONSTANTLY HIGH SENSITIVITY FIBER OPTIC INTERFEROMETER SENSOR
CONSTELLATION ADJUSTMENT BASED ON DETECTED ENCODING AND ENCODING CONVERSION FOR MODEM CONNECTIONS
CONSTELLATION DESIGN FOR A PCM MODEM
CONSTELLATION GENERATION AND RE-EVALUATION
CONSTELLATION MATCHING SYSTEM AND METHOD
CONSTELLATION OF ELLIPTICAL ORBIT SATELLITES WITH LINE OF APSIDES LYING IN OR NEAR THE EQUATORIAL PLANE
CONSTELLATION OF NON-GEOSTATIONARY SATELLITES PROVIDING PERMANENT COVERAGE
CONSTELLATION-MULTIPLEXED TRANSMITTER AND RECEIVER
CONSTITUENT CONCENTRATION INDICATOR WITH A DIFFERENTIATOR MEANS AND A SIGNAL CONDITIONING MEANS
CONSTITUENT SENSING SYSTEM
CONSTITUENT SEPARATION SYSTEM
CONSTITUENT SUBSTRATE FOR ELECTRONIC EQUIPMENT USING WIRING LAYER MADE OF COPPER AND TRANSPARENT CONDUCTIVE LAYER MADE OF COMPOSITE OXIDE CONTAINING INDIUM OXIDE AND METAL OXIDE AS MAIN COMPONENTS AND ELECTRONIC EQUIPMENT USING THE SAME
CONSTITUENTS OF ENGINE EXHAUST
CONSTITUTE ACTIVATOR OF RETINOID (CAR) RECEPTOR POLYPEPTIDES
CONSTITUTENT LAYER HARVESTING FROM A CENTRIFUGED SAMPLE IN A TUBE
CONSTITUTION AND FABRICATION OF FLAT-PANEL DISPLAY AND POROUS-FACED STRUCTURE SUITABLE FOR PARTIAL OF FULL USE IN SPACER OF FLAT-PANEL DISPLAY
CONSTITUTION AND FABRICATION OF FLAT-PANEL DISPLAY AND POROUS-FACED STRUCTURE SUITABLE FOR PARTIAL OR FULL USE IN SPACER OF FLAT-PANEL DISPLAY
CONSTITUTION OF AN ELECTRODE ARRANGEMENT IN A SEMICONDUCTOR ELEMENT
CONSTITUTION OF PROTRUSIBLE EXTERNAL AND FIXED INTERNAL ANTENNA FOR RADIO PORTABLE REMOTE TERMINAL DEVICE
CONSTITUTITIVE TRIPLE RESPONSE GENE AND MUTATIONS
CONSTITUTIVE ACTIVATOR OF RETINOID ACID RESPONSE (CAR) RECEPTOR FUSION PROTIEN
CONSTITUTIVE AND INDUCIBLE PROMOTERS FROM COFFEE PLANTS
CONSTITUTIVE ANDROSTANE RECEPTOR
CONSTITUTIVE DISEASE RESISTANCE(CDR1) GENE AND METHODS OF USE THEREOF
CONSTITUTIVE EXPRESSION OF NON-INFECTIOUS HIV-LIKE PARTICLES
CONSTITUTIVE EXPRESSION OF P450SOY AND FERREDOXIN-SOY IN STREPTOMYCES
CONSTITUTIVE PSEUDOHYPHAL GROWTH YEAST MUTANTS
CONSTITUTIVE SOLUBLE METHANE MONOOXYGENASE MUTANTS OF METHANOTROPHIC BACTERIA SUCH AS METHYLOSINUS TRICHOSPORIUM A.T.C.C. 55314
CONSTITUTIVE TRIPLE RESPONSE GENE AND MUTATIONS
CONSTITUTIVELY ACTIVATED SEROTONIN RECEPTORS
CONSTITUTIVELY ACTIVE PHOSPHATIDYLINOSITOL 3-KINASE AND USES THEREOF
CONSTITUTIVELY ACTIVE TRANSCRIPTION FACTORS AND THEIR USES FOR IDENTIFYING MODULATORS OF ACTIVITY INCLUDING DYSPROLIFERATIVE CELLULAR CHANGES
CONSTRAIN LAYER DAMPING OF A DISC DRIVE PRINTED WIRING ASSEMBLY
CONSTRAINED ATTRIBUTE GRAMMARS FOR SYNTACTIC PATTERN RECOGNITION
CONSTRAINED CORRECTIVE TRAINING FOR CONTINUOUS PARAMETER SYSTEM
CONSTRAINED DIAPHRAGM TRANSDUCER
CONSTRAINED DIGITAL HALFTONING
CONSTRAINED DISCRETE-COSINE-TRANSFORM COEFFICIENTS FOR BETTER ERROR DETECTION IN A CORRUPTED MPEG-4 BITSTREAMS
CONSTRAINED ENCODED MOTION VECTORS
CONSTRAINED FEED TECHNIQUES FOR PHASED ARRAY SUBARRAYS
CONSTRAINED FILAMENT ELECTROLYTIC ANODE AND PROCESS OF FABRICATION
CONSTRAINED FILM HEAT PROCESSOR AND METHOD OF DEVELOPING DIGITAL FILM USING CONDUCTION HEAT TRANSFER
CONSTRAINED FILM HEAT PROCESSOR AND METHOD OF DEVELOPING DIGITAL FILM USING RADIANT HEAT TRANSFER
CONSTRAINED FIXED DELAY TREE SEARCH RECEIVER FOR A MTR=2 ENCODED COMMUNICATION CHANNEL
CONSTRAINED GEOMETRY ADDITION POLYMERIZATION CATALYSTS
CONSTRAINED GEOMETRY LIGANDS AND COMPLEXES DERIVED THEREFROM
CONSTRAINED GEOMETRY METALLOCENE CATALYST COMPLEXES
CONSTRAINED HARDENING METHOD AND APPARATUS FOR DEFORMED BAR WORKPIECES
CONSTRAINED HELICAL PEPTIDES AND METHODS OF MAKING SAME
CONSTRAINED HERMAPHRODITIE BALL AND SOCKET HINGE JOINT
CONSTRAINED LANGEVIN DYNAMICS METHOD FOR SIMULATING MOLECULAR CONFORMATIONS
CONSTRAINED LAYER DAMPED LOUDSPEAKER ENCLOSURE
CONSTRAINED LAYER DAMPED STEEL BAFFLE
CONSTRAINED LAYER DAMPER WITH SLIT(S) AND/OR CUTOUT(S)
CONSTRAINED LAYER DAMPING COMPOSITIONS
CONSTRAINED MOTION ESTIMATION AND COMPENSATION FOR PACKET LOSS RESILIENCY IN STANDARD BASED CODEC
CONSTRAINED NATURAL LANGUAGE INTERFACE FOR A COMPUTER SYSTEM
CONSTRAINED NATURAL LANGUAGE INTERFACE FOR A COMPUTER THAT EMPLOYS A BROWSE FUNCTION
CONSTRAINED OPTICAL MESH PROTECTION FOR TRANSMISSION SYSTEMS
CONSTRAINED OPTIMUM MATCHED ILLUMINATION-RECEPTION RADAR
CONSTRAINED PEPTIDES
CONSTRAINED PIVOT GUIDE POST
CONSTRAINED POST CURE INFLATION
CONSTRAINED PROSTHESIS FOR REPLACEMENT OF JOINTS BETWEEN LONG BONES IN THE HAND
CONSTRAINED PROSTHETIC KNEE WITH ROTATING BEARING
CONSTRAINED QUENCHING APPARATUS AND HEAT TREATMENT APPARATUS
CONSTRAINED REGISTER SHARING TECHNIQUE FOR LOW POWER VLSI DESIGN
CONSTRAINED RIPPLE SPRING ASSEMBLY WITH DEBONDABLE ADHESIVE AND METHODS OF INSTALLATION
CONSTRAINED SEARCHING OF AN INDEX
CONSTRAINED SHEAR MODE MODULATOR
CONSTRAINED SHORTEST PATH ROUTING METHOD
CONSTRAINED SIGNATURE-BASED TEST
CONSTRAINED SOCKET FOR USE WITH A BALL-AND-SOCKET JOINT
CONSTRAINED SOMATOSTATIN AGONISTS AND ANTAGONISTS
CONSTRAINED SPACE CAMERA ASSEMBLY
CONSTRAINED STORE RELEASE SYSTEM
CONSTRAINED VANE COMPRESSOR WITH OIL SKIVE
CONSTRAINED WAVELET PACKET FOR TREE-STRUCTURED VIDEO CODERS
CONSTRAINED-ENVELOPE DIGITAL-COMMUNICATIONS TRANSMISSION SYSTEM AND METHOD THEREFOR
CONSTRAINED-ENVELOPE TRANSMITTER AND METHOD THEREFOR
CONSTRAINED-STOCHASTIC-EXCITATION CODING
CONSTRAINING CORE FOR SURFACE MOUNT TECHNOLOGY
CONSTRAINING PULSE POSITIONS IN CELP VOCODING
CONSTRAINING RING FOR A HIP CUP
CONSTRAINING RING FOR USE IN ELECTRONIC PACKAGING
CONSTRAINING SLEEVE DEVICE FOR STABILIZING BATTERY CASING CONTOUR
CONSTRAINING VIDEO PRODUCTION BASED ON COMPRESSION-RELATED INFORMATION
CONSTRAINT BASED GRAPHICS SYSTEM
CONSTRAINT BASED MATERIAL TRIMMING CONTROLLER
CONSTRAINT CONDITION EVALUATION METHOD AND CONSTRAINT CONDITION EVALUATION SYSTEM
CONSTRAINT DRIVEN INSERTION OF SCAN LOGIC FOR IMPLEMENTING DESIGN FOR TEST WITHIN AN INTEGRATED CIRCUIT DESIGN
CONSTRAINT EVALUATION SYSTEM, EXPERT SYSTEM, AND CONSTRAINT EVALUATION METHOD
CONSTRAINT GENERATING DEVICE FOR LOGIC SYNTHESIS AND ITS CONSTRAINT GENERATING METHOD
CONSTRAINT IDLER
CONSTRAINT KNOWLEDGE IN SIMULATION MODELING
CONSTRAINT LANGUAGE PARSER WHICH REJECTS INVALID FILTER CONSTRAINT DURING RUN TIME
CONSTRAINT RELIEVING VECTOR QUANTIZATION APPARATUS AND VECTOR QUANTIZATION METHOD HAVING CONSTRAINTS IN QUANTIZATION VECTORS
CONSTRAINT SYSTEM FOR PARALLEL CANTILEVER SHAFTS
CONSTRAINT TYPE VIBRATION DAMPING MATERIAL
CONSTRAINT VALIDITY CHECKING
CONSTRAINT-BASED LANGUAGE CONFIGURATION FILES FOR UPDATING AND VERIFYING SYSTEM CONSTRAINTS
CONSTRAINT-BASED ROUTE SELECTION USING BIASED COST
CONSTRAINT-BASED ROUTING BETWEEN INGRESS-EGRESS POINTS IN A PACKET NETWORK
CONSTRAINT-BASED SPREADSHEET SYSTEM CAPABLE OF DISPLAYING A PROCESS OF EXECUTION OF PROGRAMS
CONSTRAST MEDIA
CONSTRICTED GLOW DISCHARGE PLASMA SOURCE
CONSTRICTED NECK BLISTER PACK AND APPARATUS AND METHOD FOR MAKING THE SAME
CONSTRICTED SPRING PRESSURE RELIEF MECHANISM FOR DRIPLESS DRIVE CAULK DISPENSING DEVICES
CONSTRICTING DEVICE FOR BODY PARTS
CONSTRICTION DEVICE INCLUDING FIXATION STRUCTURE
CONSTRICTION DEVICE INCLUDING REINFORCED SUTURE HOLES
CONSTRICTION DEVICE INCLUDING TEAR RESISTANT STRUCTURES
CONSTRICTIVE COLLAR
CONSTRUCT AND METHOD FOR EXPRESSION OF TETRACYCLINE RESISTANCE GENES IN E. COLI
CONSTRUCTABLE SPINNING TOP MAZE
CONSTRUCTED BACILLUS THURINGIENSIS STRAINS PRODUCING MOSQUITOCIDAL CRYSTAL PROTEINS
CONSTRUCTED PISTON OR PISTON CONSISTING OF COMPONENTS THAT ARE WELDED OR SOLDERED TOGETHER
CONSTRUCTED WETLANDS REMEDIATION SYSTEM
CONSTRUCTED WETLANDS SYSTEM, TREATMENT APPARATUS AND METHOD
CONSTRUCTED WETLANDS TO CONTROL NONPOINT SOURCE POLLUTION
CONSTRUCTING A BIFURCATED DATABASE OF CONTEXT-DEPENDENT AND CONTEXT-INDEPENDENT DATA ITEMS
CONSTRUCTING A HIGH DENSITY CELL CULTURE SYSTEM
CONSTRUCTING A MULTI-SEGMENT PRINT JOB FROM MULTIPLE LOCAL OR REMOTE SOURCES USING A NETWORK INTERFACE
CONSTRUCTING A TRANSACTION SERIALIZATION ORDER BASED ON PARALLEL OR DISTRIBUTED DATABASE LOG FILES
CONSTRUCTING AND ANALYZING REQUIREMENTS OF REUSABLE ROOFLINE ANCHOR
CONSTRUCTING AND ANALYZING REQUIREMENTS OF TRUSS SPLICE SHOE
CONSTRUCTING APPLICATIONS IN DISTRIBUTED CONTROL SYSTEMS USING COMPONENTS HAVING BUILT-IN BEHAVIORS
CONSTRUCTING ARTIFICIAL PLANTS
CONSTRUCTING BALANCED MULTIDIMENSIONAL RANGE-BASED BITMAP INDICES
CONSTRUCTING CLASSIFICATION WEIGHTS MATRICES FOR PATTERN RECOGNITION SYSTEMS USING REDUCED ELEMENT FEATURE SUBSETS
CONSTRUCTING DATABASE REPRESENTING MANIFOLD ARRAY ARCHITECTURE INSTRUCTION SET FOR USE IN SUPPORT TOOL CODE CREATION
CONSTRUCTING DEVICE-STATE TABLES FOR INKJET PRINTING
CONSTRUCTING FULLY DENSE COMPOSITE ACCURATE TOOLING
CONSTRUCTING METHOD FOR UNDERGROUND CONTINUOUS DOUBLE-ROW WALLS AND THE STRUCTURE OF CONTINUOUS DOUBLE-ROW WALLS
CONSTRUCTING METHOD OF FINITE-STATE MACHINE PERFORMING TRANSITIONS ACCORDING TO A PARTIAL TYPE OF SUCCESS FUNCTION AND A FAILURE FUNCTION
CONSTRUCTING METHOD OF ORGANIZATION ACTIVITY DATABASE, ANALYSIS SHEET USED THEREIN, AND ORGANIZATION ACTIVITY MANAGEMENT SYSTEM
CONSTRUCTING SHAPE SKELETONS OF 3D OBJECTS USING GENERALIZED VORONOI DIAGRAMS
CONSTRUCTING SOLID MODELS USING IMPLICIT FUNCTIONS DEFINING CONNECTIVITY RELATIONSHIPS AMONG LAYERS OF AN OBJECT TO BE MODELED
CONSTRUCTING TONE SCALE CURVES
CONSTRUCTING, DOWNLOADING, AND ACCESSING PAGE BUNDLES ON A PORTABLE CLIENT HAVING INTERMITTENT NETWORK CONNECTIVITY
CONSTRUCTION ACCESSORY
CONSTRUCTION ACCORDING TO A DOUBLE-CURVED SURFACE
CONSTRUCTION ADHESIVE FOR POROUS FILM
CONSTRUCTION AID FOR DETERMINING LENGTH AND ANGLE OF STAIR RAILINGS
CONSTRUCTION ALIGNMENT APPARATUS AND METHOD
CONSTRUCTION ANCHOR BOLT AND RETAINER FOR POURED CONCRETE
CONSTRUCTION AND A TERMINAL CAP FOR PREVENTING AN ERRONEOUS CONNECTION
CONSTRUCTION AND APPLICATION FOR NON-VOLATILE REPROGRAMMABLE SWITCHES
CONSTRUCTION AND APPLICATION FOR NON-VOLATILE, REPROGRAMMABLE SWITCHES
CONSTRUCTION AND CIVIL ENGINEERING DATABASE GENERATOR AND DISPLAY
CONSTRUCTION AND EXPRESSION OF RENILLA LUCIFERASE AND GREEN FLUORESCENT PROTEIN FUSION GENES
CONSTRUCTION AND EXPRESSION OF SYNTHETIC GENES ENCODING ENVELOPE EPITOPES OF THE HUMAN T CELL LEUKEMIA VIRUS TYPE I
CONSTRUCTION AND EXPRESSION OF SYNTHETIC GENES ENCODING ENVELOPES OF HUMAN T CELL LEUKEMIA VIRUS TYPE I
CONSTRUCTION AND MANUFACTURING PROCESS FOR DROP ON DEMAND PRINT HEADS WITH NOZZLE HEATERS
CONSTRUCTION AND METHOD FOR INTERCONNECTING FLEXIBLE PRINTED CIRCUIT AND WIRING BOARD, LIQUID CRYSTAL DISPLAY DEVICE, AND METHOD FOR MANUFACTURING THE SAME
CONSTRUCTION AND METHOD FOR JOINTING A PLURALITY OF STEEL MEMBERS USING SHEAR RINGS
CONSTRUCTION AND METHOD OF CONNECTING CONNECTOR TO BASE BOARD
CONSTRUCTION AND METHOD OF FORMING A DOOR ASSEMBLY FOR AN AIR SYSTEM
CONSTRUCTION AND METHOD OF MAKING AIR BAG CLOSURE ASSEMBLY
CONSTRUCTION AND METHOD OF MAKING HEAT-EXCHANGING CAST METAL FORMING TOOL
CONSTRUCTION AND METHOD OF MAKING PROP SHAFT HAVING ENLARGED END SECTIONS
CONSTRUCTION AND RECONSTRUCTION OF PROBE MICROSCOPE IMAGES BY FUNCTION ENVELOPE METHODS
CONSTRUCTION AND SEALING OF TILED, FLAT-PANEL DISPLAYS
CONSTRUCTION AND SPORT LINE REEL
CONSTRUCTION AND USAGE OF A PRE-WARMED CACHE FOR CLIENT-SERVER EMULATOR
CONSTRUCTION AND USE OF GENES ENCODING PATHOGENIC EPITOPES FOR TREATMENT OF AUTOIMMUNE DISEASE
CONSTRUCTION AND USE OF SYNTHETIC CONSTRUCTS ENCODING SYNDECAN
CONSTRUCTION AND WAY OF OPERATION OF A GAS DIFFUSION ELECTRODE FOR THE ELECTROCHEMICAL DISCOVERY OF MATERIALS FROM AQUEOUS SOLUTIONS
CONSTRUCTION APPARATUS
CONSTRUCTION APPARATUS AND CONSTRUCTION METHOD
CONSTRUCTION APPARATUS FOR BUILDING AND CONSTRUCTING METHOD THEREWITH
CONSTRUCTION APPARATUS FOR BUILDINGS AND CONSTRUCTING METHOD THEREWITH
CONSTRUCTION ARRANGEMENT INCLUDING MULTIPLE PANELS PROVIDED WITH INTERLOCKING EDGES AND RELATED METHODS
CONSTRUCTION ARTICLE FROM WASTE MATERIALS AND METHOD OF MAKING THE SAME
CONSTRUCTION ASSEMBLIES
CONSTRUCTION ASSEMBLY
CONSTRUCTION ASSEMBLY FOR AWNINGS
CONSTRUCTION ASSEMBLY FOR CLOSURE STRUCTURE
CONSTRUCTION ASSEMBLY FOR SUPPORTING THIN PANELS
CONSTRUCTION ASSEMBLY HAVING A QUICK COUPLER
CONSTRUCTION ASSEMBLY INCLUDING A RECTANGULAR BLOCK FOR DRY WALLING OR THE PERMANENT CONSTRUCTION OF A WALL OR PARTITION
CONSTRUCTION ASSEMBLY INCLUDING A TELESCOPIC STRUT
CONSTRUCTION BEAM BLOCK TOY WITH SELECTIVE ANGULAR INTERLOCK
CONSTRUCTION BLOCK
CONSTRUCTION BLOCK CAP
CONSTRUCTION BLOCK CAP AND METHOD
CONSTRUCTION BLOCK FOR BUILDING A RETAINING WALL
CONSTRUCTION BLOCK FOR MAKING VARIOUS STRUCTURES
CONSTRUCTION BLOCK STRUCTURE
CONSTRUCTION BLOCK SYSTEM
CONSTRUCTION BLOCK WITH GUIDING SYSTEM FOR WALLS
CONSTRUCTION BLOCK, AND A STRUCTURE PROVIDED WITH THE SAME
CONSTRUCTION BLOCKS AND STRUCTURES THEREFROM
CONSTRUCTION BLOCKS FOR EXTENDED SUPPORT STRUCTURES
CONSTRUCTION BLOCKS WITH COMPLEMENTARY INTERSTITIAL MODULES
CONSTRUCTION BOARD
CONSTRUCTION BOARD AND ITS MANUFACTURING METHOD
CONSTRUCTION BOARD GAME WITH CHANCE DEVICE
CONSTRUCTION BOARD HAVING A NUMBER OF MARKS FOR FACILITATING THE INSTALLATION THEREOF AND A METHOD FOR FABRICATING SUCH CONSTRUCTION BOARD
CONSTRUCTION BOARD MATERIALS WITH ENGINEERED MICROSTRUCTURES
CONSTRUCTION BOARD MITER GUIDE
CONSTRUCTION BUILDING SET
CONSTRUCTION CHAIR WITH PLASTIC BASE
CONSTRUCTION COMPONENT OR CONSTRUCTION WITH A COMPOSITE STRUCTURE, ASSOCIATED COMPOSITE CONSTRUCTION ELEMENT, AND METHOD OF PRODUCTION
CONSTRUCTION COMPONENTS AND ASSEMBLY SYSTEM
CONSTRUCTION COMPOSITION, STRUCTURE, AND METHOD
CONSTRUCTION CONVEYOR BELT
CONSTRUCTION CRANE BASE
CONSTRUCTION DEVICE TO HOLD SOAP POWDER AND THE LIKE
CONSTRUCTION DOOR SAVING DEVICE
CONSTRUCTION ELEMENT
CONSTRUCTION ELEMENT AND COUPLING DEVICE THEREOF
CONSTRUCTION ELEMENT AND GUIDE CHANNEL FOR SMOKE PIPE
CONSTRUCTION ELEMENT FOR A NOISE-SUPPRESSION SHED
CONSTRUCTION ELEMENT FOR LIMITING THE FORE PART OF A FORMWORK
CONSTRUCTION ELEMENT, IN PARTICULAR SUPPORTING OR SOUND INSULATING CONSTRUCTION ELEMENT CAPABLE OF BEING PLANTED, SET OF CONSTRUCTION ELEMENTS AND PROCESS FOR PRODUCING THE SAME
CONSTRUCTION ELEMENTS
CONSTRUCTION ELEMENTS MADE FROM TIRE CARCASSES
CONSTRUCTION ELEVATOR
CONSTRUCTION EQUIPMENT
CONSTRUCTION EQUIPMENT AND METHOD FOR PRECAST SEGMENTAL BRIDGES
CONSTRUCTION EQUIPMENT CONTROL SYSTEM
CONSTRUCTION EQUIPMENT IMPLEMENT
CONSTRUCTION EQUIPMENT IMPLEMENT AND METHOD
CONSTRUCTION EQUIPMENT LOCKOUT SYSTEM WITH EMERGENCY SHUTDOWN
CONSTRUCTION FASTENER ASSEMBLY
CONSTRUCTION FOR A BUSINESS FORM HAVING A REMOVABLE LABEL
CONSTRUCTION FOR A CAM ROTATION SENSOR ATTACHING PORTION
CONSTRUCTION FOR A LAMINATED CARD OR LABEL
CONSTRUCTION FOR A LAMINATED WINDOW LABEL
CONSTRUCTION FOR A PET CAT WITH VARIABLE INTERNAL AMBIENT LIGHT LEVELS
CONSTRUCTION FOR A ROLLOVER PROTECTION STRUCTURE
CONSTRUCTION FOR ADJUSTABLY MOUNTING SENSOR PORTION OF MAGNETIC ROTATION SENSOR AND METHOD OF ADJUSTING GAP BETWEEN SENSOR AND ROTATING DRUM | CONSTRUCTION FOR AN ADJUSTABLE WRENCH
CONSTRUCTION FOR AND METHOD OF WATERPROOFING WIRING HARNESS
CONSTRUCTION FOR ATTACHING A DISK IN A DISK DRIVE
CONSTRUCTION FOR ATTACHING A FRONT GRILLE SHIELD PLATE
CONSTRUCTION FOR ATTACHING A RADIANT HEAT BLOCKING METAL FOIL OF AN INSULATED CONTAINER
CONSTRUCTION FOR ATTACHING A SEAT BELT ADJUSTER
CONSTRUCTION FOR AUTOMATICALLY MILKING ANIMALS
CONSTRUCTION FOR AUTOMATICALLY MILKING ANIMALS, SUCH AS COWS
CONSTRUCTION FOR AUTOMOBILES THAT RELATES SEAT DEVICE AND CAR BODY TO EACH OTHER
CONSTRUCTION FOR BUILDING PANELS AND OTHER BUILDING COMPONENTS
CONSTRUCTION FOR CLOSING A THROUGH HOLE IN A MAGNESIUM ALLOY CASE
CONSTRUCTION FOR COUPLING TWO TUBES
CONSTRUCTION FOR DECORATIVE PATTERNING, DISTRIBUTION OF ILLUMINATION, AND FLEXIBLE PROJECTION OF LINEAR LIGHT SOURCES
CONSTRUCTION FOR EXERCISE WEIGHT COMPARTMENTS
CONSTRUCTION FOR FASTENING A SHEET OF TRANSPARENT PLASTIC MATERIAL IN AN OPENING OF AN AWNING
CONSTRUCTION FOR FASTENING AND CONTACTING RESISTOR ELEMENTS FOR A HOT FILM ANEMOMETER AND SENSOR ARRANGEMENT USING SUCH CONSTRUCTION
CONSTRUCTION FOR FASTENING MEMBERS TOGETHER
CONSTRUCTION FOR FIXING BUS BAR FOR MINIATURE FUSES TO ELECTRICAL CONNECTION BOX
CONSTRUCTION FOR HIGH DENSITY POWER MODULE PACKAGE (CASE II)
CONSTRUCTION FOR HOLDING RECORDING PAPER ROLL
CONSTRUCTION FOR MAINTAINING ASSEMBLED AXIAL INTEGRITY OF AN ELECTRICALLY ACTUATED VALVE
CONSTRUCTION FOR MOUNTING AN AUTOMOBILE BUMPER
CONSTRUCTION FOR MOUNTING ELECTRONIC COMPONENT ON FLEXIBLE SUBSTRATE
CONSTRUCTION FOR MOUNTING SUBFRAME TO VEHICLE BODY
CONSTRUCTION FOR ORTHOPEDIC HINGES REQUIRING CONDYLAR OR OTHER JOINT PADS
CONSTRUCTION FOR PORTABLE DISK ANTENNA
CONSTRUCTION FOR PREVENTING A DISENGAGEMENT OF A SEALING PACKING AND A COVER PROVIDED THEREWITH
CONSTRUCTION FOR PREVENTING ERRONEOUS ASSEMBLING OF BATTERY TERMINALS, A BATTERY AND A SET OF TERMINALS
CONSTRUCTION FOR PREVENTING INCOMPLETE CONNECTION OF PIPES
CONSTRUCTION FOR PREVENTING SHIFT OF SHEATH
CONSTRUCTION FOR PREVENTING WATER FROM PENETRATING BETWEEN ELECTRIC WIRES INSERTED INTO GROMMET
CONSTRUCTION FOR PROCESSING A SHIELD LAYER OF A SHIELDED CABLE
CONSTRUCTION FOR REMOVABLY RETAINING GLAZING MATERIAL
CONSTRUCTION FOR RETAINING COILED SPRING OF HIGH-VOLTAGE TERMINAL IN ENGINE IGNITION SYSTEM
CONSTRUCTION FOR SECURING A PAPER ROLL TO A HOLDER
CONSTRUCTION FOR SECURING AN ATTACHMENT DEVICE OF A MAGNETIC LOCK DEVICE IN A PREDETERMINED ORIENTATION
CONSTRUCTION FOR SUSPENSION SYSTEM MOUNTING PORTIONS OF BODY OF VEHICLE
CONSTRUCTION FOR TRANSMITTING DISPLACEMENT OF PIEZOELECTRIC ELEMENT
CONSTRUCTION FOR ULTRA-THIN ORTHOTIC
CONSTRUCTION FRAMEWORK WITH INTERCROSSING BEAMS
CONSTRUCTION FRAMING SQUARE
CONSTRUCTION HANGER
CONSTRUCTION HANGER AND METHOD OF MAKING THE SAME
CONSTRUCTION HAT TIMEPIECE APPARATUS
CONSTRUCTION HAVING A DAMPING DEVICE
CONSTRUCTION HEATER AND METHOD OF MANUFACTURE OF HEATER
CONSTRUCTION HOIST SYSTEM
CONSTRUCTION HOIST WITH OPTICAL MONITORING DEVICE
CONSTRUCTION IN REACTION ROD
CONSTRUCTION IN WHICH SENSING ELEMENTS FOR SENSING A LOAD ON A VEHICLE ARE MOUNTED
CONSTRUCTION INCLUDING A SHED FOR ANIMALS
CONSTRUCTION INCLUDING AN ACCOMMODATION FOR ANIMALS
CONSTRUCTION INCLUDING AN IMPLEMENT FOR AUTOMATICALLY MILKING ANIMALS
CONSTRUCTION INCLUDING AN IMPLEMENT FOR MILKING ANIMALS
CONSTRUCTION INCLUDING INTERNAL CLOSURE FOR USE IN MICROWAVE COOKING
CONSTRUCTION KIT
CONSTRUCTION KIT FOR HORIZONTALLY AND VERTICALLY SLIDING WINDOW ASSEMBLIES
CONSTRUCTION KIT FOR KITES AND MODEL GLIDERS AS WELL AS PRESENTATION OBJECTS AND SURFACES
CONSTRUCTION KIT MADE OF CONCRETE PAVING STONES
CONSTRUCTION LASER ACCESSORY FOR GENERATING ALIGNED SPOTS
CONSTRUCTION LASER ACCESSORY FOR GENERATING ALIGNED SPOTS OR LINES
CONSTRUCTION LAYOUT BLOCK
CONSTRUCTION LAYOUT MARKING DEVICE
CONSTRUCTION LINE HOLDER
CONSTRUCTION MACHINE
CONSTRUCTION MACHINE CONTROL SYSTEM
CONSTRUCTION MACHINE HAVING COMPRESSION-MEMORY SOLID RUBBER TIRES
CONSTRUCTION MACHINE WITH A DUCT FOR HYDRAULIC HOSES
CONSTRUCTION MACHINE WITH FUNCTION OF MEASURING FINISHING ACCURACY OF FLOOR FACE SMOOTHED THEREBY
CONSTRUCTION MACHINE WITH MUFFLER COOLING VENT
CONSTRUCTION MACHINERY
CONSTRUCTION MATERIAL
CONSTRUCTION MATERIAL AND METHOD
CONSTRUCTION MATERIAL BEARING NUMERICAL MEASUREMENT INDICIA THEREON
CONSTRUCTION MATERIAL CONTAINING CATALYTIC CRACKING CATALYST PARTICLES
CONSTRUCTION MATERIAL FOR VEHICLES
CONSTRUCTION MATERIAL HOLDING SYSTEM
CONSTRUCTION MATERIAL MADE OF WOODY MATERIAL AND MORTAR
CONSTRUCTION MEMBER
CONSTRUCTION MEMBER AND ASSEMBLIES THEREOF
CONSTRUCTION MEMBER AND METHOD FOR FORMING ARCHWAYS AND THE LIKE
CONSTRUCTION MEMBER AND METHOD FOR FORMING CURVED WALL AND THE LIKE
CONSTRUCTION MEMBER PROTECTOR PLATE UNIT
CONSTRUCTION MEMBRANE
CONSTRUCTION METHOD
CONSTRUCTION METHOD FOR CUSHIONING COMPONENT
CONSTRUCTION METHOD FOR PROTECTING THE AIRPLANE RUNWAY SURFACE FROM BEING CRACKED TO SPIT OUT CRUSH STONES
CONSTRUCTION METHOD OF BOARDLIKE BUILDING ELEMENTS
CONSTRUCTION METHOD OF COMPOUND ASPHALT NET WITH FLAME TREATMENT
CONSTRUCTION METHOD OF JOINING COLUMN AND BEAM IN BUILDING STRUCTURE BASED ON HEAVY-WEIGHT STEEL FRAME CONSTRUCTION
CONSTRUCTION METHOD OF NUCLEAR REACTOR REINFORCED CONCRETE CONTAINMENT VESSEL AND DIAPHRAGM FLOOR STRUCTURE OF NUCLEAR REACTOR REINFORCED CONCRETE CONTAINMENT VESSEL
CONSTRUCTION METHODS FOR PREVENTING LAND EROSION AND IMPROVING STREAMS, OR FOR REVETMENTS, AND CONSTRUCTION METHODS FOR PREVENTING MOUNTAIN LANDSLIDES
CONSTRUCTION MODULE
CONSTRUCTION MODULE PROTECTING AGAINST EMISSIONS FROM RADIO ACTIVE MATERIAL AND METHOD
CONSTRUCTION MODULE, METHOD FOR PRODUCING SUCH MODULES AND THE USE OF THE MODULE
CONSTRUCTION MODULE, PANEL AND SYSTEM
CONSTRUCTION MODULES
CONSTRUCTION NAILING METHOD AND STRUCTURES
CONSTRUCTION OF A BUSINESS FORM WITH PATTERNED SILICONE LINER
CONSTRUCTION OF A CHAMBER CASING IN A PLASMA ETCHING SYSTEM
CONSTRUCTION OF A CIRCULAR AND SOCKET CONNECTOR FOR PRODUCING ELECTRICAL LINE CONNECTIONS
CONSTRUCTION OF A COLOR TRANSFORM TO REDUCE EFFECTS OF SCANNER METAMERISM
CONSTRUCTION OF A FAN
CONSTRUCTION OF A FILM ON A SEMICONDUCTOR WAFER
CONSTRUCTION OF A FLUID IMPERMEABLE SUBTERRANEAN BARRIER WALL
CONSTRUCTION OF A FUEL SUPPLY PIPE IN A ROTARY THROTTLE VALVE TYPE CARBURETOR
CONSTRUCTION OF A LEVER SWITCH FOR A VEHICLE
CONSTRUCTION OF A LOG CABIN
CONSTRUCTION OF A MOTOR WITH A BUILT-IN SENSOR
CONSTRUCTION OF A MULTICARRIER SIGNAL
CONSTRUCTION OF A PANEL
CONSTRUCTION OF A STAND ALONE PORTABLE TELEPHONE UNIT
CONSTRUCTION OF A STRAIN OF BACILLUS SUBTILIS 168 THAT DISPLAYS THE SUBLANCIN LANTIBIOTIC ON THE SURFACE OF THE CELL
CONSTRUCTION OF A TANTALUM NITRIDE FILM ON A SEMICONDUCTOR WAFER
CONSTRUCTION OF A TECHNOLOGY LIBRARY FOR USE IN AN ELECTRONIC DESIGN AUTOMATION SYSTEM THAT CONVERTS THE TECHNOLOGY LIBRARY INTO NON-LINEAR, GAIN-BASED MODELS FOR ESTIMATING CIRCUIT DELAY
CONSTRUCTION OF A VACUUM CLEANER HEAD
CONSTRUCTION OF A VEHICLE DOOR PROVIDED WITH A WIRING HARNESS AND A WATERPROOF GROMMET USED IN THE CONSTRUCTION
CONSTRUCTION OF A WATER TREATMENT APPLIANCE
CONSTRUCTION OF A WATER TREATMENT RESERVOIR FOR A DOMESTIC WATER TREATMENT APPLIANCE
CONSTRUCTION OF AIR CONDITIONING LOUVER
CONSTRUCTION OF AN AUTOMOBILE POWER TRAIN
CONSTRUCTION OF AN ELECTRICAL MACHINE WITH INDIVIDUAL POLE WINDINGS
CONSTRUCTION OF AN ELECTROMAGNETIC INTERFERENCE FILTER
CONSTRUCTION OF AN IGG BINDING PROTEIN TO FACILITATE DOWNSTREAM PROCESSING USING PROTEIN ENGINEERING
CONSTRUCTION OF AN INTAKE PASSAGE HAVING A VARIABLE CROSS-SECTIONAL AREA AND LENGTH FOR AN INTERNAL COMBUSTION ENGINE
CONSTRUCTION OF AN ON-VEHICLE LEVER SWITCH
CONSTRUCTION OF AND LATCHING ARRANGEMENT FOR LARGE-SIZE OVERHEAD BI-FOLD DOORS
CONSTRUCTION OF AND METHOD OF MANUFACTURING AN MIM OR MIS ELECTRON SOURCE
CONSTRUCTION OF AND METHOD OF PROCESSING END PORTION OF SHIELDED CABLE
CONSTRUCTION OF AND MOUNTING SYSTEM FOR MACHINERY SIDE PANELS
CONSTRUCTION OF AND TECHNIQUE FOR FASTENING WEAR SHOES TO A TRAWL DOOR
CONSTRUCTION OF ARTICLES OF MANUFACTURE OF FIBER REINFORCED STRUCTURAL COMPOSITES
CONSTRUCTION OF BUILT-UP STRUCTURES ON THE SURFACE OF PATTERNED MASKING USED FOR POLYSILICON ETCH
CONSTRUCTION OF CANISTER-TYPE FILTERS
CONSTRUCTION OF COMBINATION SWITCH FOR VEHICLE
CONSTRUCTION OF CONCEPTIONAL DRAWINGS UTILIZING HYPER LINK INFORMATION OF WEB DOCUMENT AND INTERNET SEARCHING METHOD THROUGH IT
CONSTRUCTION OF CONNECTING ELECTRIC CONNECTION BOX FOR INSTRUMENT PANEL HARNESS
CONSTRUCTION OF COVER FOR BALL JOINT
CONSTRUCTION OF ELECTRICAL CONNECTION TO OXIDE SUPERCONDUCTOR
CONSTRUCTION OF ELECTRODE FOR HIGH PRESSURE DISCHARGE LAMP AND PROCESS FOR PRODUCING THE SAME
CONSTRUCTION OF ELEMENTS FOR THREE-DIMENSIONAL OBJECTS
CONSTRUCTION OF FIXING FLEXIBLE SHEET ON ELECTRONIC DEVICE
CONSTRUCTION OF FLOTATION SWIMSUITS
CONSTRUCTION OF FULL LENGTH CDNA LIBRARIES
CONSTRUCTION OF GEOMETRICAL OBJECTS FROM POLYNUCLEOTIDES
CONSTRUCTION OF HAND TOOL SET
CONSTRUCTION OF HIERARCHICAL NETWORKS THROUGH EXTENSION
CONSTRUCTION OF KNOB FOR A SWITCH
CONSTRUCTION OF LARGE STRUCTURES BY ROBOTIC CRANE PLACEMENT OF MODULAR BRIDGE SECTIONS
CONSTRUCTION OF LARGE, ROBUST, MONOLITHIC AND MONOLITHIC LIKE, AMLCD DISPLAYS WITH WIDE VIEW ANGLE
CONSTRUCTION OF LARGE, ROBUST, MONOLITHIC AND MONOLITHIC-LIKE, AMLCD DISPLAYS WITH WIDE VIEW ANGLE
CONSTRUCTION OF MECHANICAL DRAFT EXCLUDERS FOR THE LOWER PART OF JAMBS
CONSTRUCTION OF MINKOWSKI SUMS AND DERIVATIVES MORPHOLOGICAL COMBINATIONS OF ARBITRARY POLYHEDRA IN CAD/CAM SYSTEMS
CONSTRUCTION OF MODULAR OFFICE PANEL SYSTEMS
CONSTRUCTION OF MOTOR
CONSTRUCTION OF MUSIC BOX
CONSTRUCTION OF NORMALIZED CDNA LIBRARIES FROM EUCARYOTIC CELLS
CONSTRUCTION OF NOZZLE FOR PLASMA CUTTING TORCH
CONSTRUCTION OF NUCLEAR POWER PLANTS ON DEEP ROCK OVERLAIN BY WEAK SOIL DEPOSITS
CONSTRUCTION OF NUCLEOPROTEIN BASED ASSEMBLIES COMPRISING ADDRESSABLE COMPONENTS FOR NANOSCALE ASSEMBLY AND NANOPROCESSORS
CONSTRUCTION OF OIL PAN FOR INTERNAL COMBUSION ENGINE
CONSTRUCTION OF ON-VEHICLE LEVER SWITCH
CONSTRUCTION OF OPTICAL DISK
CONSTRUCTION OF PALLETS FROM CORRUGATED SHEET MATERIAL
CONSTRUCTION OF PASTEURELLA HAEMOLYTICA VACCINES
CONSTRUCTION OF PBGA SUBSTRATE FOR FLIP CHIP PACKING
CONSTRUCTION OF PILLOW
CONSTRUCTION OF PIPE FITTINGS
CONSTRUCTION OF REAR HOLDER FOR CONNECTOR CAPABLE TO BE DRAWN OUT
CONSTRUCTION OF RECOMBINANT DNA BY EXONUCLEASE RECESSION
CONSTRUCTION OF REFRIGERATED CONTAINERS
CONSTRUCTION OF RETAINING RESILIENT CONTACT PIECE IN FEMALE ELECTRICAL CONNECTION MEMBER
CONSTRUCTION OF RETROVIRAL PRODUCER CELLS FROM ADENOVIRAL AND RETROVIRAL VECTORS
CONSTRUCTION OF ROOT PORTION OF FRONT SIDE MEMBER
CONSTRUCTION OF ROTARY TYPE SHEET COUNTER DISC
CONSTRUCTION OF SAP COLLECTING DEVICES
CONSTRUCTION OF SCANNING OR IMAGING ARRAYS SUITABLE FOR LARGE DOCUMENTS
CONSTRUCTION OF SEAT CUSHION
CONSTRUCTION OF SLIDE RAIL FOR AUTOMOBILE SEAT
CONSTRUCTION OF STRUCTURAL BODY
CONSTRUCTION OF SUPPORTING SHAFT OF ROLL OF PAPER
CONSTRUCTION OF SUSPENDED CEILINGS, WALLS, AND PARTITION WALLS
CONSTRUCTION OF SYNTHETIC DNA AND ITS USE IN LARGE POLYPEPTIDE SYNTHESIS
CONSTRUCTION OF THE DISCANT STRINGS FOR THE CLASSIC AND THE FLAMENCO GUITAR
CONSTRUCTION OF THERMAL PRINT HEAD AND METHOD OF FORMING PROTECTIVE COATING
CONSTRUCTION OF THERMOSTABLE MUTANTS OF A LOW MOLECULAR MASS XYLANASE
CONSTRUCTION OF TORSION BAR FOR TILTING CABIN OF AN AUTOMOBILE
CONSTRUCTION OF TOUCH SCREEN
CONSTRUCTION OF TRAINABLE SEMANTIC VECTORS AND CLUSTERING, CLASSIFICATION, AND SEARCHING USING TRAINABLE SEMANTIC VECTORS
CONSTRUCTION OF UMBRELLA COVER WITHOUT AXIS CONNECTIVE LINE
CONSTRUCTION OF UNI-DIRECTIONALLY CLONED CDNA LIBRARIES FROM MESSENGER RNA FOR IMPROVED 3' END DNA SEQUENCING
CONSTRUCTION OF VEHICLE POWER TRAIN
CONSTRUCTION OF WALL PANEL AND PANEL STRUCTURE
CONSTRUCTION PANEL
CONSTRUCTION PANEL AND METHOD
CONSTRUCTION PANEL AND METHOD OF CONSTRUCTING A LEVEL PORTION OF A BUILDING
CONSTRUCTION PANEL INTERCONNECTION SYSTEM
CONSTRUCTION PANEL SECTIONS WITH CONCEALED OPEN REGIONS
CONSTRUCTION PANEL WITH EDGES ADAPTED TO BE COUPLED TOGETHER
CONSTRUCTION PANEL WITH PLURALITY OF CELLS
CONSTRUCTION PAPER FOR CONSTRUCTING A THREE-DIMENSIONAL SHAPE FROM A PRINTABLE FOLDABLE SURFACE
CONSTRUCTION PERIMETER GUARD
CONSTRUCTION PREFORM FOR AN ARCHWAY
CONSTRUCTION PROCESS FOR SIMULATING A DESIRABLE APPEARANCE
CONSTRUCTION SAFETY SCREEN SYSTEM
CONSTRUCTION SET
CONSTRUCTION SET FOR A CONSTRUCTION PROJECT
CONSTRUCTION SET FOR BUILDING STRUCTURES
CONSTRUCTION SET FOR MARBLE TRACK WITH MID-AIR TRAJECTORIES FROM A VERTICAL PLANAR SURFACE
CONSTRUCTION SET FOR THE ERECTION OF A SUPPORTING STRUCTURE
CONSTRUCTION SETS WITH INJECTION MOLDED AND EXTRUDED TUBE BEAMS
CONSTRUCTION SHEETING
CONSTRUCTION SHIMS
CONSTRUCTION SHINGLE
CONSTRUCTION SITE DISPLAY AND STORAGE CASE
CONSTRUCTION SITE HAULING SYSTEM
CONSTRUCTION SITE PORTABLE MONITORING SYSTEM
CONSTRUCTION SITE SAFETY
CONSTRUCTION STUD PROTECTOR PLATE
CONSTRUCTION SUBSTRUCTURE
CONSTRUCTION SYMMETRIC CIPHERS USING THE CAST DESIGN PROCEDURE
CONSTRUCTION SYSTEM
CONSTRUCTION SYSTEM AND ACCESSORY
CONSTRUCTION SYSTEM AND METHOD FOR CONNECTING RIGID SHEET-LIKE PANELS TOGETHER INTO DOLL HOUSES, PLAY HOUSES, UTILITY SHEDS AND OTHER STRUCTURES
CONSTRUCTION SYSTEM FOR BUILDING THREE-DIMENSIONAL STRUCTURES
CONSTRUCTION SYSTEM FOR LOAD FEEDERS WITH PERMANENT WIRING
CONSTRUCTION SYSTEM FOR MANUFACTURED HOUSING UNITS
CONSTRUCTION SYSTEM FOR MODULAR APARTMENTS, HOTELS AND THE LIKE
CONSTRUCTION SYSTEM FOR PARTITION WALLS, WALLS AND EXTRADOSES
CONSTRUCTION SYSTEM OF CORRUGATED EDGE SECTIONS AND ENGAGING CONNECTING DEVICES
CONSTRUCTION SYSTEM USING LIGHTWEIGHT FIRE-RESISTANT PANELS
CONSTRUCTION SYSTEM USING PANELIZED INSULATION HAVING INTEGRAL STRUCTURAL FRAME
CONSTRUCTION SYSTEM WITH PANEL SUPPORT ACCESSORY
CONSTRUCTION SYSTEM WITH PRE-MANUFACTURED HOLE PATTERNS
CONSTRUCTION SYSTEMS AND ELEMENTS THEREOF
CONSTRUCTION TAPE
CONSTRUCTION TECHNIQUE AND STRUCTURE RESULTING THEREFROM
CONSTRUCTION TECHNOLOGY
CONSTRUCTION TEST APPARATUS
CONSTRUCTION THAT PREVENTS THE UNDERCUT OF INTERCONNECT LINES IN PLASMA METAL ETCH SYSTEMS
CONSTRUCTION TOOL AND METHOD OF USE
CONSTRUCTION TOY AND ADAPTER
CONSTRUCTION TOY BLOCK AND CONNECTOR SET
CONSTRUCTION TOY DEVICE AND METHOD OF USING THE SAME
CONSTRUCTION TOY INTERCONNECTOR
CONSTRUCTION TOY KIT
CONSTRUCTION TOY SET FOR ASSEMBLING A STEERABLE TOY VEHICLE
CONSTRUCTION TOY SET HAVING LOW INSERTION FORCE CONNECTING BODIES
CONSTRUCTION TOY SET OF PLANAR BLOCKS WITH APERTURES AND HINGED CONNECTORS | CONSTRUCTION TOY SUPPORT BASE
CONSTRUCTION TOY SYSTEM
CONSTRUCTION TOYS COMPRISING BUILDING BLOCKS AND SINGLE AND COMPOSITE ELONGATED STAR CONNECTORS
CONSTRUCTION TRACKING AND PAYMENT METHOD AND SYSTEM
CONSTRUCTION UNIT FOR A MODULAR BUILDING
CONSTRUCTION UNIT FOR A RETAINING WALL AND A METHOD FOR CONSTRUCTING THE RETAINING WALL
CONSTRUCTION UNIT SUITABLE FOR MAKING STAIR STRINGERS
CONSTRUCTION USING ALUMINUM CANS
CONSTRUCTION USING EXTRUDED SECTIONS AND COMPOSITE PANELS
CONSTRUCTION VEHICLE WITH A WORKING APPLIANCE
CONSTRUCTION WALL BRACKET
CONSTRUCTION WALL PANEL AND PANEL STRUCTURE
CONSTRUCTION WATER TOY
CONSTRUCTION WITH HIGH TC SUPERCONDUCTOR MATERIAL AND PROCESS FOR PRODUCING THE CONSTRUCTION
CONSTRUCTION WITH MODULAR WALLS
CONSTRUCTIONAL BRICK
CONSTRUCTIONAL BUILDING SET
CONSTRUCTIONAL BUILDING SET COMPRISING GEAR BOX CASINGS
CONSTRUCTIONAL BUILDING SET HAVING AN ELECTRIC CONDUCTOR
CONSTRUCTIONAL COLLECTOR HEAT TRANSFER UNIT AND AIR CONDITIONER EQUIPPED THEREWITH
CONSTRUCTIONAL COMPONENTS FOR USE IN A WALL STRUCTURE
CONSTRUCTIONAL ELEMENT FOR GLAZING BUILDING STRUCTURES
CONSTRUCTIONAL ELEMENTS
CONSTRUCTIONAL KIT
CONSTRUCTIONAL LASER
CONSTRUCTIONAL PIECES WITH DEFORMABLE JOINTS
CONSTRUCTIONAL SANDWICH PANEL FOR HIGH STRENGTH WALL AND COVERING ASSEMBLIES, AND METHOD FOR MAKING SAID PANEL
CONSTRUCTIONAL SUPPORT
CONSTRUCTIONAL SYSTEM
CONSTRUCTIONAL TOY AND APPARATUS FOR MAKING THE SAME
CONSTRUCTIONAL TOY PIECES
CONSTRUCTIONAL TOY WITH DEFORMABLE JOINTS
CONSTRUCTIONAL TOYS
CONSTRUCTIONAL UNIT CONSISTING OF A HYDRAULIC MACHINE (HYDRAULIC PUMP OR HYDRAULIC MOTOR) AND A SUPPORT
CONSTRUCTIONAL UNIT WITH WELD STUD AND CAP
CONSTRUCTIONS AND MANUFACTURING PROCESSES FOR THERMALLY ACTIVATED PRINT HEADS
CONSTRUCTIONS COMPRISING INSULATIVE MATERIALS
CONSTRUCTIONS COMPRISING SOLDER BUMPS
CONSTRUCTIONS HAVING IMPROVED PENETRATION RESISTANCE
CONSTRUCTIVE ARRANGEMENT APPLIED TO AN INTEGRATED THERMOSTATIC VALVE ATTACHED TO ITS OWN HOUSING
CONSTRUCTIVE ARRANGEMENT APPLIED TO AN OPENING DEVICE FOR PACKAGES
CONSTRUCTIVE ARRANGEMENT DISPOSED IN A TUNING MECHANISM FOR PERCUSSION INSTRUMENTS
CONSTRUCTIVE ARRANGEMENT OF TIRE RASPING SEPARATOR AND SAW ASSEMBLY
CONSTRUCTIVE BODY AND FRICTION STIR WELDING METHOD
CONSTRUCTIVE DISPOSAL IN A STABILIZER FOR A RAILWAY TRUCK
CONSTRUCTIVE MODELLING OF ARTICLES
CONSTRUCTIVE MODULE OF AN ELECTRONIC TELECOMMUNICATIONS EQUIPMENT, WITH AN INTERFACE TOWARDS A TESTING AND DIAGNOSING SYSTEM
CONSTRUCTIVE OCCLUSION LIGHTING SYSTEM WITH PORTED CAVITY AND FAN STRUCTURE
CONSTRUCTIVE SYSTEM APPLIED FOR BUILDINGS
CONSTRUCTIVE SYSTEMS FOR OBJECTS IN A COMPUTER-IMPLEMENTED GRAPHICS SYSTEM
CONSTRUCTOR BASED OBJECT INITIALIZATION WITH OVERRIDES
CONSTRUCTS AND METHODS FOR ENHANCING PROTEIN LEVELS IN PHOTOSYNTHETIC ORGANISMS
CONSTRUCTS CONTAINING IMPATIENS NECROTIC SPOT TOSPOVIRUS RNA AND METHODS OF USE THEREOF
CONSTRUCTS ENCODING DEGRADATION ENZYMES FOR AROMATIC COMPOUNDS AND TRANSGENIC PLANTS CONTAINING SAME
CONSTRUCTS ENCODING RECOMBINANT ANTIBODY-TOXIN FUSION PROTEINS
CONSTRUCTS FOR EXPRESSION OF MONELLIN IN PLANT CELLS
CONSTRUCTS FOR PRODUCING PHOSPHORYLATED FUSION PROTEINS
CONSULTANT MATCHING SYSTEM AND METHOD FOR SELECTING CANDIDATES FROM A CANDIDATE POOL BY ADJUSTING SKILL VALUES
CONSULTATION BUSINESS SUPPORT SYSTEM
CONSUMABLE ANODE FOR CATHODIC PROTECTION, MADE OF ALUMINUM-BASED ALLOY
CONSUMABLE ANODE, ELECTRODISSOLUTION PROCESS APPLIED TO THE DECONTAMINATION OF SLIGHTLY RADIOACTIVE LIQUID EFFLUENTS AND APPARATUS FOR PERFORMING THE PROCESS
CONSUMABLE ASPHALT CONTAINERS AND METHOD OF REDUCING FUMES FROM A KETTLE OF MOLTEN ASPHALT
CONSUMABLE AUTHENTICATION PROTOCOL AND SYSTEM
CONSUMABLE BEVERAGE DISPENSER WITH ONE-WAY VALVE
CONSUMABLE CHARGE BOX AND ASSEMBLY FOR RECHARGING MATERIAL INTO A FURNACE OR VESSEL FOR PRODUCING MOLTEN METAL
CONSUMABLE CLOSURE SUPPORT FOR AIR BAG INFLATOR
CONSUMABLE COMPONENT IDENTIFICATION AND DETECTION
CONSUMABLE ELECTRODE DC ARC WELDER
CONSUMABLE ELECTRODE ELECTROSLAG REFINING FEED SYSTEMS AND METHODS
CONSUMABLE ELECTRODE GAS SHIELDED ARC WELDING METHOD AND APPARATUS
CONSUMABLE ELECTRODE METHOD FOR FORMING MICRO-ALLOYED PRODUCTS
CONSUMABLE ELECTRODE TYPE AC PULSE ARC WELDING APPARATUS
CONSUMABLE ELECTRODE TYPE ARC WELDING METHOD AND DEVICE
CONSUMABLE ELECTRODE TYPE ARC WELDING METHOD AND DEVICE THEREFOR
CONSUMABLE ELECTRODE TYPE D.C. ARC WELDER
CONSUMABLE ELECTRODE TYPE PULSE ARC WELDING METHOD
CONSUMABLE ELECTRODE TYPE PULSED ARC WELDER AND CONTROLLING METHOD FOR THE SAME
CONSUMABLE FORM WITH ADJUSTABLE WALLS
CONSUMABLE FORM WITH DEGRADABLE LINING
CONSUMABLE GUMMY DELIVERY SYSTEM
CONSUMABLE IGNITER FOR A SOLID ROCKET MOTOR
CONSUMABLE ITEM SUPPLYING SYSTEM FOR AN IMAGE FORMING APPARATUS
CONSUMABLE LANCE FOR OXYGEN INJECTION AND DESULFURIZATION AND METHOD
CONSUMABLE LOW ENERGY LAYERED PROPELLANT CASING
CONSUMABLE MANAGEMENT DEVICE, AN IMAGE FORMING SYSTEM, AND A METHOD OF MANAGING AN IMAGING CONSUMABLE OF AN IMAGE FORMING DEVICE
CONSUMABLE MANDREL FOR SUPERCONDUCTING MAGNETIC COILS
CONSUMABLE MATERIAL MANAGEMENT SYSTEM AND METHOD
CONSUMABLE MODULE FOR AN ELECTRONIC APPLIANCE
CONSUMABLE ORDER-ASSISTANCE SYSTEM FOR COMPUTER PERIPHERAL DEVICE WITHIN A SINGLE CONNECTION ENVIRONMENT AND METHOD FOR REPLENISHING CONSUMABLES
CONSUMABLE PATTERN COATING FOR LOST FOAM CASTINGS
CONSUMABLE POLISHING ELEMENT, PARTICULARLY FOR FINISHING OPTICAL GLASS
CONSUMABLE PORT COVER FOR DUCTED INTEGRAL ROCKET-RAMJET ENGINE
CONSUMABLE PRODUCT CONTAINING ABSORBENT COMPOSITION
CONSUMABLE RECHARGING BOX
CONSUMABLE REPLACEMENT BY MOBILE INPUT/OUTPUT BINS
CONSUMABLE SEMICONDUCTOR IGNITER PLUG
CONSUMABLE SHOCK EVADER
CONSUMABLE STAPLE REFILL
CONSUMABLE SUPPLIES MONITORING/ORDERING SYSTEM FOR REPROGRAPHIC EQUIPMENT
CONSUMABLE SWITCHING ARRANGEMENT
CONSUMABLE-ELECTRODE AC GAS SHIELD ARC WELDING METHOD AND APPARATUS THEREFOR
CONSUMABLES CONTAINER WITH MULTI-FUNCTIONAL CAP
CONSUMABLES STORAGE BOX
CONSUMER APPARATUS PROVIDED WITH A PROGRAMMING SYSTEM BY MEANS OF A FORM-FILLING TYPE DISPLAY
CONSUMER APPLIANCE HAVING BOTH EXPLANATORY COMMENT AND EXTRA-LINGUISTIC SIGNALIZATION UPON ACTUATION THEREOF AND REVERSIBLE STEPPING BETWEEN THOSE TWO
CONSUMER ARTICLE COMPRISING A WC BASKET UNIT AND RE-FILL BOTTLE
CONSUMER ARTICLE SECURITY ARRANGEMENT
CONSUMER ASSEMBLED STROLLER FRONT WHEEL ASSEMBLY
CONSUMER AUDIO APPLIANCE RESPONSIVE TO WATERMARK DATA
CONSUMER BATTERY HAVING A BUILT-IN INDICATOR
CONSUMER COMMENT REPORTING APPARATUS AND METHOD
CONSUMER CONTACT TOLL OPTIMIZER
CONSUMER ELECTRONIC DEVICES WITH ADAPTABLE UPGRADE CAPABILITY
CONSUMER FEEDBACK APPARATUS
CONSUMER FRIENDLY PACKAGE
CONSUMER GASOLINE TESTER
CONSUMER INFRARED COMMUNICATIONS RECEIVER CARRIER FREQUENCY RANGE DETECTION CIRCUIT FOR AN INFRARED COMMUNICATIONS CONTROLLER
CONSUMER INTERFACE FOR A DIGITAL TELEVISION SYSTEM
CONSUMER INTERFACE FOR PROGRAMMING DEVICE
CONSUMER ITEM
CONSUMER MODEL
CONSUMER NIGHT VISION VIEWING APPARATUS
CONSUMER ORIENTED SMART CARD SYSTEM AND AUTHENTICATION TECHNIQUES
CONSUMER POLYOLEFIN PRIMER
CONSUMER PRODUCT
CONSUMER PRODUCT COMPOSITIONS COMPRISING PHOTOSENSITIVE MATERIALS AS PHOTOBLEACHES OR PHOTODISINFECTANTS
CONSUMER PRODUCT PACKAGE INCORPORATING A SPRAY DEVICE UTILIZING LARGE DIAMETER BUBBLES
CONSUMER PRODUCT TRANSPORT, STORAGE AND DISPLAY SYSTEM
CONSUMER PROFILING SYSTEM
CONSUMER PROFILING SYSTEM WITH ANALYTIC DECISION PROCESSOR
CONSUMER SAFE FITMENT FOR CONNECTING A RESERVOIR TO A DISPENSING APPLIANCE
CONSUMER SIZABLE AND INSTALLABLE FABRIC TYPE WINDOW SHADE AND METHOD OF MANUFACTURE THEREOF
CONSUMER TRANSACTION FACILITY
CONSUMER USABLE POPCORN KERNEL AND/OR HUSK REMOVING DENTAL INSTRUMENT
CONSUMER-ACTIVATED CLIP LIFT FEATURE FOR TISSUE CARTONS
CONSUMER-ASSEMBLED FRAME FOR INFANT CARRIER
CONSUMER-BASED SYSTEM AND METHOD FOR MANAGING AND PAYING ELECTRONIC BILLING STATEMENTS
CONSUMER-DOCUMENT INKING MONITOR AND CONTROL
CONSUMER-DRIVEN ELECTRONIC INFORMATION PRICING MECHANISM
CONSUMER-INITIATED, AUTOMATIC CLASSIFIED EXPENDITURE BANK CHECK SYSTEM
CONSUMER-MODIFIABLE SANDAL OR SLIPPER
CONSUMER-PROVIDED PROMOTIONAL CODE ACTUATABLE POINT-OF-SALE DISCOUNTING SYSTEM
CONSUMPTION CONTROL
CONSUMPTION CONTROLLER
CONSUMPTION CURRENT CIRCUIT AND METHOD FOR MEMORY DEVICE
CONSUMPTION DISTANCE BASED CUSTOMIZED RENDERING OF ENTERTAINMENT PROGRAMMING
CONSUMPTION INDICATOR LABEL APPARATUS, AND METHODS OF USING SAME
CONSUMPTION INFORMATION MANAGEMENT APPARATUS, IMAGE FORMATION APPARATUS, AND CONSUMPTION INFORMATION MANAGEMENT SYSTEM
CONSUMPTION MEASUREMENT SYSTEM FOR REMOTE READING
CONSUMPTION METER WITH MEMORY, DISPLAY, AND CONTACT-LESS SUPPLY OF ENERGY FROM EXTERIOR WHEN EXTERNAL POWER SUPPLY VOLTAGE IS ABSENT
CONSUMPTION OF HYPOCHLORITE VALUES CONTAINED IN CHLORATE SOLUTIONS OF ELECTROLYSIS
CONSUMPTION-ORIENTED DRIVING-POWER LIMITATION OF A VEHICLE DRIVE
CONTACT
CONTACT ACTIVATED SOUND AND LIGHT GENERATING NOVELTY FOOD CONTAINERS
CONTACT ACTUATED LAMP
CONTACT ADHERING METHOD
CONTACT ADHESIVE PATTERNS FOR SHEET STOCK PRECLUDING ADHESION OF FACING SHEETS IN STORAGE
CONTACT ADHESIVES FOR SELF-ADHESIVE ARTICLES
CONTACT AGENCY INTERPOSED BETWEEN IC AND IC RECEPTACLE
CONTACT ALARM APPARATUS
CONTACT ALERTS FOR UNCONNECTED USERS
CONTACT ALIGNING STRUCTURE IN IC SOCKET
CONTACT ALIGNMENT FOR INTEGRATED CIRCUITS
CONTACT AND ALIGNMENT FEATURE
CONTACT AND CONNECTOR
CONTACT AND CONNECTOR FOR TERMINATING A PAIR OF INDIVIDUALLY INSULATED WIRES
CONTACT AND CONTACT ASSEMBLY USING THE SAME
CONTACT AND CONTROL MODULE
CONTACT AND DEEP TRENCH PATTERNING
CONTACT AND ELECTRIC CONNECTOR ONTO WHICH THE CONTACT IS MOUNTED
CONTACT AND HIGH-DENSITY CONNECTOR USING THE SAME
CONTACT AND INDUCTION CUTTING MACHINE
CONTACT AND METHOD FOR PRODUCING A CONTACT
CONTACT AND TERMINAL CONNECTOR HAVING THE CONTACT
CONTACT AND VIA FABRICATION TECHNOLOGIES
CONTACT AND VIA STRUCTURE AND METHOD OF FABRICATION
CONTACT APPARATUS
CONTACT APPARATUS FOR A NETWORK
CONTACT APPARATUS FOR COUPLING TERMINALS WHICH MOVE WITH RESPECT TO ONE ANOTHER
CONTACT APPARATUS FOR INTEGRATED CIRCUITS
CONTACT APPARATUS PARTICULARLY USEFUL WITH TEST EQUIPMENT
CONTACT AREA SENSOR
CONTACT AREAS ON AN OPTICAL WAVEGUIDE AND METHOD OF MAKING
CONTACT ARM AND ELECTRONIC DEVICE TESTING APPARATUS USING THE SAME
CONTACT ARM LOCKING MECHANISM FOR SCREW DRIVING MACHINE
CONTACT ARM WITH INTERNAL IN-LINE SPRING
CONTACT ARRANGEMENT
CONTACT ARRANGEMENT AND COUNTER-CONTACT MODULE
CONTACT ARRANGEMENT BETWEEN A COAX CABLE AND THE BLADES OF A WIRING BACKPLANE
CONTACT ARRANGEMENT FOR A CIRCUIT BREAKER USING MAGNETIC ATTRACTION FOR HIGH CURRENT TRIP
CONTACT ARRANGEMENT FOR A VACUUM INTERRUPTER
CONTACT ARRANGEMENT FOR AN ELECTRICAL SWITCHING DEVICE ESPECIALLY FOR A CONTACTOR
CONTACT ARRANGEMENT FOR DETACHABLY ATTACHING AN ELECTRIC COMPONENT, ESPECIALLY AN INTEGRATED CIRCUIT TO A PRINTED CIRCUIT BOARD
CONTACT ARRANGEMENT FOR ELECTRICAL APPARATUS
CONTACT ARRANGEMENT FOR ELECTRICAL POWER DISTRIBUTION SWITCH OR THE LIKE
CONTACT ARRANGEMENT FOR USE WITH HIGH SPEED TRANSMISSION
CONTACT ARRANGEMENT FOR VACUUM INTERRUPTER AND VACUUM INTERRUPTER USING THE CONTACT ARRANGEMENT
CONTACT ARRANGEMENT HAVING AN AUXILIARY CONTACT
CONTACT ARRAY
CONTACT ARRAY FOR ELECTRICAL INTERFACE CONNECTOR
CONTACT ARRAY FOR SEMICONDUCTOR PACKAGE
CONTACT ARRAY IMAGER WITH INTEGRAL WAVEGUIDE AND ELECTRONICS
CONTACT ARRAY SCANNERS WITH CIRCULATING MEMORY
CONTACT ARRAY STRUCTURE FOR BURIED TYPE TRANSISTOR
CONTACT ASSEMBLIES, METHODS FOR MAKING CONTACT ASSEMBLIES, AND PLATING MACHINES WITH CONTACT ASSEMBLIES FOR PLATING MICROELECTRONIC WORKPIECES
CONTACT ASSEMBLY
CONTACT ASSEMBLY AND METHOD FOR MAKING SAME
CONTACT ASSEMBLY FOR A MAGNETIC SWITCH
CONTACT ASSEMBLY FOR A PLUG CONNECTOR, IN PARTICULAR FOR A PCB PLUG CONNECTOR
CONTACT ASSEMBLY FOR ACCUMULATION CONVEYORS
CONTACT ASSEMBLY FOR AUTOMATIC TEST HANDLER
CONTACT ASSEMBLY FOR LAND GRID ARRAY INTERPOSER OR ELECTRICAL CONNECTOR
CONTACT ASSEMBLY FOR SELECTOR OF STEP TRANSFORMER
CONTACT ASSEMBLY FOR SEMICONDUCTOR RESISTORS SUCH AS POSISTORS
CONTACT ASSEMBLY ON A PRESELECTOR
CONTACT ASSEMBLY WITH GROUNDING CONDUCTOR SUPPORT
CONTACT ASSEMBLY, CONNECTOR ASSEMBLY UTILIZING SAME, AND ELECTRONIC ASSEMBLY
CONTACT BACKUP ROLLER APPROACH TO FSW PROCESS
CONTACT BAR ASSEMBLY FOR A TATTOOING DEVICE
CONTACT BEAM FOR ELECTRICAL INTERCONNECT COMPONENT
CONTACT BETWEEN A MONOCRYSTALLINE SILICON REGION AND A POLYCRYSTALLINE SILICON STRUCTURE AND METHOD FOR PRODUCING SUCH A CONTACT
CONTACT BETWEEN ELEMENT TO BE DRIVEN AND THIN FILM TRANSISTOR FOR SUPPLYING POWER TO ELEMENT TO BE DRIVEN
CONTACT BLADE ASSEMBLY FOR A CIRCUIT BREAKER
CONTACT BLOCK ASSEMBLY AND A METHOD OF ASSEMBLING A CONTACT BLOCK ASSEMBLY
CONTACT BLOCK FOR A CHIP CARD READER
CONTACT BLOCK FOR A SMART CARD READER
CONTACT BLOCK HAVING CONVERTIBLE NORMALLY OPEN OR NORMALLY CLOSED ELECTRICAL CONTACT
CONTACT BLOCK IN A BATTERY PACK HAVING SNAP IN FEATURES
CONTACT BODIES AND METHOD AND APPARATUS OF MAKING SAME
CONTACT BODIES FOR LIQUID AND GAS
CONTACT BODY FOR COOLING TOWERS
CONTACT BONDING ADHESIVES
CONTACT BRIDGE ARRANGEMENT FOR CONDUCTIVELY INTERCONNECTING CIRCUIT BOARDS
CONTACT BRUSH ADAPTED TO MOVE OVER AN ELECTRICAL TRACK ASSOCIATED THEREWITH
CONTACT CAPPING LOCAL INTERCONNECT
CONTACT CARRIER
CONTACT CARRIER INCLUDING AN INSULATING BODY AND CONTACTS POSITIONED THEREIN
CONTACT CARRIERS (TILES) FOR POPULATING LARGER SUBSTRATES WITH SPRING CONTACTS
CONTACT CHAIN FOR TESTING AND ITS RELEVANTLY DEBUGGING METHOD
CONTACT CHAIN STRUCTURE FOR TROUBLESHOOTING EPROM MEMORY CIRCUITS
CONTACT CHARGE SUPPLY DEVICE
CONTACT CHARGER
CONTACT CHARGER AND IMAGE FORMING APPARATUS COMPRISING THE SAME
CONTACT CHARGER AND IMAGE FORMING APPARATUS INCORPORATING THE CONTACT CHARGER
CONTACT CHARGER AND IMAGE FORMING APPARATUS PROVIDED WITH SAME
CONTACT CHARGER FOR CHARGING A PHOTOSENSITIVE MEMBER
CONTACT CHARGER HAVING A CURVED SURFACE
CONTACT CHARGER HAVING A SELECTED PERPENDICULAR RESISTIVITY
CONTACT CHARGER HAVING AN OSCILLATING VOLTAGE FOR CHARGING A PHOTOSENSITIVE MEMBER | CONTACT CHARGER HAVING CHARGING PERFORMANCE ENHANCING PARTICLES EXISTING AT A CONTACT PORTION BETWEEN THE CONTACT CHARGER AND THE MEMBER TO BE CHARGED
CONTACT CHARGER OF AN ELECTROPHOTOGRAPHIC IMAGE FORMING APPARATUS
CONTACT CHARGING DEVICE
CONTACT CHARGING DEVICE FOR CHARGING A SURFACE TO A GIVEN POTENTIAL AND IMAGE FORMING APPARATUS USING THE SAME
CONTACT CHARGING DEVICE HAVING A BRUSH RESTRICTING MEMBER
CONTACT CHARGING DEVICE HAVING A MAGNETIC BRUSH COMPRISED OF MAGNETIC PARTICLES FOR ELECTROSTATICALLY CHARGING A PHOTOSENSITIVE DRUM
CONTACT CHARGING DEVICE, PROCESS CARTRIDGE AND IMAGE FORMING DEVICE HAVING THE SAME
CONTACT CHARGING IMAGE FORMING APPARATUS HAVING IMPROVED IMAGE TRANSFER
CONTACT CHARGING MEMBER AND APPARATUS USING THE CHARGING MEMBER
CONTACT CHARGING MEMBER AND ELECTROPHOTOGRAPHIC APPARATUS USING THE SAME
CONTACT CHARGING MEMBER FOR CHARGING A PHOTOSENSITIVE DRUM HAVING IMPROVED DURABILITY AND A METHOD FOR MAKING THE SAME
CONTACT CHARGING MEMBER, CONTACT CHARGING METHOD MAKING USE OF IT, AND APPARATUS MAKING USE OF IT
CONTACT CHARGING MEMBER, IMAGE FORMING UNIT INCLUDING THE CONTACT CHARGING MEMBER AND ELECTROPHOTOGRAPHIC IMAGE FORMING APPARATUS INCLUDING THE IMAGE FORMING UNIT
CONTACT CHARGING MEMBER, PROCESS FOR PRODUCING SAME AND ELECTROPHOTOGRAPHIC APPARATUS USING SAME
CONTACT CHARGING METHOD AND APPARATUS
CONTACT CHARGING SYSTEM FOR UNIFORMLY CHARGING A CHARGE RETENTIVE SURFACE
CONTACT CHECK FOR REMOTE SENSED MEASUREMENT
CONTACT CHEMICAL APPLICATOR DEVICE AND METHOD
CONTACT CLEANER ROLL CLEANING SYSTEM
CONTACT CLEANING ROLLER OSCILLATED BY A BARREL CAM
CONTACT CLOSING SOLENOID ASSEMBLY FOR AIR CIRCUIT BREAKERS
CONTACT CLOSING SPEED LIMITER FOR A TRANSFER SWITCH
CONTACT CLOSURE DATA LOGGER
CONTACT COMBUSTION TYPE CARBON MONOXIDE SENSOR
CONTACT COMPARATOR AND METHOD OF OPERATION
CONTACT COMPONENT
CONTACT CONFIGURATION FOR SMART CARD READER
CONTACT CONFIGURATION FOR VACUUM SWITCHES
CONTACT CONFIGURATION IN MODULAR JACK
CONTACT CONNECTION OF METAL INTERCONNECTS OF AN INTEGRATED SEMICONDUCTOR CHIP
CONTACT CONNECTIONS
CONTACT CONNECTOR
CONTACT CONNECTOR SYSTEM FOR LIGHT WAVEGUIDES
CONTACT CONVERTING STRUCTURE OF SEMICONDUCTOR CHIP AND PROCESS FOR MANUFACTURING SEMICONDUCTOR CHIP HAVING SAID CONTACT CONVERTING STRUCTURE
CONTACT COOLING OF A PROJECTION MASK
CONTACT DATA CORRELATION WITH REASSESSMENT
CONTACT DEPTH CONTROLLING ROLLER MECHANISM
CONTACT DERMATITIS PHARMACEUTICAL PREPARATION WITH ANTI-HISTAMINE AND ANTI-INFLAMMATORY
CONTACT DETECTING AND SIGNALING DEVICE
CONTACT DETECTING DEVICE FOR POSITIONING RELATIVELY MOVABLE ELEMENTS
CONTACT DETECTING METHOD AND AN APPARATUS FOR THE SAME
CONTACT DETECTING METHOD AND APPARATUS FOR AN OPTICAL RADIATION HANDPIECE
CONTACT DETECTION AND CALIBRATION FOR ELECTROSTATIC FLY HEIGHT CONTROL IN A DISC DRIVE
CONTACT DETECTION DEVICE, APPARATUS USING SUCH A DEVICE AND RADIOTELEPHONE COMPRISING SUCH AN APPARATUS
CONTACT DETECTION SYSTEM AND METHOD
CONTACT DETECTOR USING RESISTANCE ELEMENTS AND ITS APPLICATION
CONTACT DEVELOPMENT SYSTEM REFERENCE STRUCTURE
CONTACT DEVICE
CONTACT DEVICE AND A TOOL FOR HANDLING IT
CONTACT DEVICE AND CONTAINER FOR A ROTATING BIOLOGICAL CONTACTOR
CONTACT DEVICE BETWEEN A LIQUID CRYSTAL DISPLAY AND A PRINTED CIRCUIT
CONTACT DEVICE FOR A CHANGER RELAY
CONTACT DEVICE FOR AN ELECTRICAL COMPONENT AND METHOD FOR MANUFACTURE
CONTACT DEVICE FOR AN ELECTRICAL FUNCTIONAL ELEMENT DISPOSED ON A WINDOW
CONTACT DEVICE FOR ELECTRIC PLUG CONNECTIONS
CONTACT DEVICE FOR ELECTRICALLY CONNECTING A PRINTED CIRCUIT BOARD WITH A LIQUID CRYSTAL DISPLAY
CONTACT DEVICE FOR MAKING CONNECTION TO AN ELECTRONIC CIRCUIT DEVICE
CONTACT DEVICE FOR PLACEMENT IN DIRECT APPOSITION TO THE CONJUNCTIVE OF THE EYE
CONTACT DEVICE FOR RAIN SENSOR OF A VEHICLE
CONTACT DEVICE FOR THE PHOTOCATHODE OF PHOTOELECTRIC TUBES AND MANUFACTURING METHOD
CONTACT DEVICE USED IN HEAT-DISSIPATING DEVICE FOR HOT SWAP
CONTACT DIGITAL ULTRASONIC DENSITOMETER
CONTACT DIGITIZER, PARTICULARLY FOR DENTAL APPLICATIONS
CONTACT DISCS FOR CONDUCTING PLATES OF BUSBARS
CONTACT DROP WIRE FOR AN ELECTRIC WARP STOP
CONTACT DRYING OF FIBERS TO FORM COMPOSITE STRANDS
CONTACT DUPLICATION OF MAGNETICALLY RECORDED INFORMATION WITHOUT THE USE OF A TRANSFER FIELD
CONTACT EACH METHODOLOGY AND INTEGRATION SCHEME
CONTACT ELECTRODE CONNECTOR
CONTACT ELECTRODE FOR N-TYPE GALLIUM NITRIDE-BASED COMPOUND SEMICONDUCTOR AND METHOD FOR FORMING THE SAME
CONTACT ELECTRODE FOR VACUUM INTERRUPTER
CONTACT ELECTRODE STRUCTURE FOR SEMICONDUCTOR DEVICE
CONTACT ELECTROSTATIC PRINTING IMAGE FORMING METHOD AND APPARATUS USING IMAGE AREA CENTERED PATCH OF TONERPATCHES OF TONER
CONTACT ELEMENT
CONTACT ELEMENT AND A SIM CARD CONTACTING APPARATUS USING SAID CONTACT ELEMENT
CONTACT ELEMENT AND CEILING ELEMENT FOR A HEATING AND COOLING CEILING
CONTACT ELEMENT AND PROCESS FOR THE PRODUCTION OF A CONTACT ELEMENT
CONTACT ELEMENT FOR A PRINTED-CIRCUIT BOARD RELAY, AND A METHOD FOR ITS PRODUCTION
CONTACT ELEMENT FOR AN ELECTRICAL CONNECTOR
CONTACT ELEMENT FOR AN ELECTRICAL DEVICE
CONTACT ELEMENT FOR ANTICIPATORY EARTHING
CONTACT ELEMENT FOR AXIAL CONTACTING
CONTACT ELEMENT FOR CONNECTING A RIBBON CABLE WITH CIRCULAR CONDUCTORS AND ROTARY CONNECTOR WITH SUCH CONTACT ELEMENT
CONTACT ELEMENT FOR ELECTRICAL CONNECTORS
CONTACT ELEMENT FOR ELECTRICAL CONTACT OF PRINTED CIRCUIT BOARDS TO A FRONT MODULE RAIL OF A MODULE SUPPORT STRUCTURE
CONTACT ELEMENT FOR SMD PRINTED CIRCUIT BOARDS AND MOUNTING METHOD
CONTACT ELEMENT FOR TRANSMITTING CURRENT TO A WORKPIECE FOR USE IN ELECTROCHEMICAL MATERIAL WORKING
CONTACT ELEMENT MADE OF SHEET-METAL MATERIAL
CONTACT ELEMENT SUPPORT IN PARTICULAR FOR A THIN SMART CARD CONNECTOR
CONTACT ELEMENT WITH A CONNECTION FOR STRANDED CONDUCTORS
CONTACT ELEMENT WITH A SCREW-TYPE TERMINAL
CONTACT ELEMENT WITH CRIMP SECTION
CONTACT ELEMENT, PROCESS FOR MAKING THE SAME AND CONNECTOR COMPRISING THE SAME
CONTACT ELEMENTS
CONTACT ELEMENTS AND PLUG-IN CONNECTORS, IN PARTICULAR FOR CABLE HARNESSES
CONTACT ELEMENTS FOR SURFACE MOUNTING OF BURN-IN SOCKET
CONTACT ENHANCEMENT APPARATUS FOR AN ELECTRIC SWITCH
CONTACT ESCAPE PATTERN
CONTACT ETCH PROCESS
CONTACT EXPLODER
CONTACT EXPOSURE DEVICE PROVIDED WITH A MASK AND WORKPIECE INTERVAL SETTING MEANS
CONTACT EXPOSURE PROCESS AND DEVICE
CONTACT EYEGLASS
CONTACT FEED SYSTEM
CONTACT FIBER OPTIC IMPACT SENSOR
CONTACT FILL CAPACITOR HAVING A SIDEWALL THAT CONNECTS THE UPPER AND LOWER SURFACES OF THE DIELECTRIC AND PARTIALLY SURROUNDS AN INSULATING LAYER
CONTACT FILLING FOR COOLING TOWERS
CONTACT FILM USED FOR DEVICES HAVING BALL GRID ARRAY STRUCTURE AND DEVICE MOUNTING STRUCTURE
CONTACT FILTER BLOCK OF JOINED TUBE SECTIONS
CONTACT FIXTURE FOR HOT GLASS
CONTACT FOR A CONDUCTOR ON A FOIL
CONTACT FOR A SOCKET
CONTACT FOR A VACUUM INTERRUPTER
CONTACT FOR A ZIF PGA SOCKET
CONTACT FOR A ZIF SOCKET TYPE CONNECTOR
CONTACT FOR AN ELECTRICAL CONNECTOR PROTECTED BY A POLYMER FILM AND ITS PRODUCTION PROCESS
CONTACT FOR BOARD TO BOARD CONNECTOR
CONTACT FOR CIRCUIT BOARD SOCKET
CONTACT FOR CONDUCTOR FOIL
CONTACT FOR CPU SOCKET
CONTACT FOR CPU SOCKET CONNECTOR
CONTACT FOR ELECTRICAL COMPONENT SOCKET
CONTACT FOR ELECTRICAL CONNECTOR
CONTACT FOR ELECTRICAL CONNECTOR FOR SUPPRESSING WICKING OF SOLDER
CONTACT FOR ELECTRICAL MOTORS
CONTACT FOR ERROR RESISTANT COUPLING OF ELECTRICAL SIGNALS
CONTACT FOR IC MEMORY CARD
CONTACT FOR IC SOCKET
CONTACT FOR INTEGRATED CIRCUITS
CONTACT FOR MEMORY CELLS
CONTACT FOR PGA AND PGA SOCKET
CONTACT FOR PIN GRID ARRAY CONNECTOR AND METHOD OF FORMING SAME
CONTACT FOR SLANTED SIMM SOCKET
CONTACT FOR SOCKET CONNECTOR
CONTACT FOR SURFACE MOUNTED CONNECTOR
CONTACT FOR TERMINATION OF COIL WINDINGS
CONTACT FOR THE THROUGH-CONNECTION OF A PRINTED CIRCUIT BOARD
CONTACT FOR USE IN AN ELECTRICAL CONNECTOR
CONTACT FOR USE WITH MATRIX TYPE CONNECTOR
CONTACT FOR VACUUM INTERRUPTER AND VACUUM INTERRUPTER USING THE CONTACT
CONTACT FOR VACUUM INTERRUPTER, AND VACUUM INTERRUPTER USING SAME
CONTACT FORMATION USING TWO ANNEAL STEPS
CONTACT FORMED OF JOINED PIECES
CONTACT FORMING MATERIAL FOR A VACUUM INTERRUPTER
CONTACT FORMING METHOD FOR SEMICONDUCTOR DEVICE
CONTACT FRAME FOR AN I.C. CARD READER
CONTACT FRONT EXTRACTION TOOL
CONTACT GAGE
CONTACT GATE STRUCTURE AND METHOD
CONTACT GEOMETRY FOR IMPROVED LATERAL MOSFET
CONTACT GLASS COMPOSITION FOR USE IN SPARK PLUGS
CONTACT GRILL APPARATUS
CONTACT HAVING A FORCE DISTRIBUTION MEMBER
CONTACT HAVING AN INDEPENDENTLY SUPPORTED INNER CONTACT ARM
CONTACT HAVING GENERALLY UNIFORM STRESS ACTING THEREON
CONTACT HAVING SPRING PORTION WITH SMALLER THICKNESS CONTACTING SURFACE
CONTACT HAZARD METER HAVING A HUMAN EQUIVALENT CIRCUIT
CONTACT HEAT-TRANSFERRING COOKING SYSTEM WITH AN ELECTRIC HOTPLATE
CONTACT HEATING DEVICE
CONTACT HOLE FABRICATION WITH THE AID OF MUTUALLY CROSSING SUDDEN PHASE SHIFT EDGES OF A SINGLE PHASE SHIFT MASK
CONTACT HOLE FILLING IN A SEMICONDUCTOR DEVICE BY IRRADIATION WITH PLASMA OF INERT GAS IONS
CONTACT HOLE FORMING METHOD
CONTACT HOLE MASK FOR SEMICONDUCTOR FABRICATION
CONTACT HOLE MODEL-BASED OPTICAL PROXIMITY CORRECTION METHOD
CONTACT HOLE OF SEMICONDUCTOR AND ITS FORMING METHOD
CONTACT HOLE STRUCTURE IN A SEMICONDUCTOR AND FORMATION METHOD THEREFOR
CONTACT HOLES OF A DIFFERENT PITCH IN AN APPLICATION SPECIFIC INTEGRATED CIRCUIT
CONTACT HOUSING FOR COUPLING TO A COAXIAL CABLE
CONTACT HOUSING FOR ELECTRICAL CONNECTOR
CONTACT IMAGE SENSOR
CONTACT IMAGE SENSOR AND METHOD OF MANUFACTURING THE SAME
CONTACT IMAGE SENSOR AND ROLLER MOUNTING STRUCTURE FOR SCANNERS
CONTACT IMAGE SENSOR ASSEMBLY FOR USE IN A FACSIMILE
CONTACT IMAGE SENSOR FLAT BED SCANNER
CONTACT IMAGE SENSOR FOR LARGE FORMAT SCANNER
CONTACT IMAGE SENSOR FOR USE WITH A SINGLE ENDED POWER SUPPLY
CONTACT IMAGE SENSOR HAND-HELD SCANNER
CONTACT IMAGE SENSOR HAVING LIGHT-RECEIVING WINDOWS
CONTACT IMAGE SENSOR IMAGE READING APPARATUS
CONTACT IMAGE SENSOR MODULE
CONTACT IMAGE SENSOR MODULE HAVING SPRING MOUNTINGS
CONTACT IMAGE SENSOR UNIT
CONTACT IMAGE SENSOR UTILIZING DIFFERENTIAL VOLTAGE PICKOFF
CONTACT IMAGE SENSOR WHOSE SENSORY ELEMENTS HAVE IDENTICAL OUTPUT LEVELS
CONTACT IMAGE SENSOR WITH CONTINUOUS LIGHT SOURCE POSITIONED ADJACENT TO DETECTION OBJECT
CONTACT IMAGE SENSOR WITH LIGHT GUIDE HAVING LEAST REFLECTIVITY NEAR A LIGHT SOURCE
CONTACT IMAGE SENSOR WITH MEANDERING DATA LINES CONNECTED TO OPPOSITE SWITCHING ELEMENTS IN ALTERNATING SENSOR BLOCKS
CONTACT IMAGING DEVICE
CONTACT IMPLANTING STRUCTURE
CONTACT IN AN INTEGRATED CIRCUIT
CONTACT IN ELECTRIC PART SOCKET
CONTACT IN SEMICONDUCTOR MEMORY DEVICE
CONTACT INDICATING SWITCH
CONTACT INTEGRATION ARTICLE
CONTACT INTEGRATION METHOD
CONTACT JUDGING CIRCUIT AND CONTACT JUDGING METHOD FOR IMPEDANCE MEASURING APPARATUS
CONTACT KEY SWITCH AND METHOD FOR ITS MANUFACTURING THE SAME
CONTACT LASER DELIVERY PROBE
CONTACT LASER DELIVERY SYSTEM
CONTACT LASER SURGICAL ENDOSCOPE AND ASSOCIATED MYRINGOTOMY PROCEDURE
CONTACT LAYER OF A THIN FILM TRANSISTOR
CONTACT LENS
CONTACT LENS ACCESSORY KIT
CONTACT LENS AND A METHOD FOR MANUFACTURING CONTACT LENS
CONTACT LENS AND METHOD FOR MAKING THE SAME
CONTACT LENS AND METHOD OF DESIGNING THE SAME
CONTACT LENS AND METHOD OF PRODUCING A CONTACT LENS
CONTACT LENS AND OPHTHALMIC SOLUTIONS
CONTACT LENS AND PROCESS FOR FITTING
CONTACT LENS AND PROCESS FOR THE MANUFACTURE THEREOF
CONTACT LENS APPLICATOR
CONTACT LENS APPLICATOR AND CARTRIDGE USED IN CONNECTION THEREWITH
CONTACT LENS APPLIER, REMOVER AND CONTAINER
CONTACT LENS BIFOCAL WITH SWITCH
CONTACT LENS CAPABLE OF LETTING EYEBALL SEEM LARGER
CONTACT LENS CARE CENTER
CONTACT LENS CARE COMPOSITIONS WITH INOSITOL PHOSPHATE COMPONENTS
CONTACT LENS CARE SYSTEM
CONTACT LENS CARRYING CASE
CONTACT LENS CASE
CONTACT LENS CASE VENTING SYSTEM
CONTACT LENS CASE WITH AUTOMATIC COUNTER
CONTACT LENS CASE WITH CLIP
CONTACT LENS CASE WITH TIME TRACKING STRUCTURE
CONTACT LENS CASES
CONTACT LENS CASTING
CONTACT LENS CASTING MOULD
CONTACT LENS CLEANER
CONTACT LENS CLEANER CONTAINING A MICROCAPSULAR POLISHING AGENT
CONTACT LENS CLEANING AND CONDITIONING POUCH AND METHOD OF USE
CONTACT LENS CLEANING AND DISINFECTING SYSTEM
CONTACT LENS CLEANING AND WETTING SOLUTIONS CONTAINING A NON-AMINE POLYETHYLENEOCY ADDUCT HAVING A HLB VALUE OF AT LEAST ABOUT 18, A SURFACE ACTIVE AGENT HAVING A HLB OF LESS THAN 18, AND WETTING AGENT
CONTACT LENS CLEANING APPARATUS
CONTACT LENS CLEANING COMPOSITION CONTAINING POLYALKLENE OXIDE MODIFIED SILOXANES
CONTACT LENS CLEANING COMPOSITION CONTAINING POLYALKYLENE OXIDE MODIFIED SILOXANES
CONTACT LENS CLEANING COMPOSITIONS
CONTACT LENS CLEANING COMPOSITIONS WITH PARTICLES OF VARIABLE HARDNESS AND PROCESSES OF USE
CONTACT LENS CLEANING INSTRUMENT
CONTACT LENS CLEANING MATERIAL AND METHOD
CONTACT LENS CLEANING MATERIAL FORMED OF A POLYMER
CONTACT LENS CLEANING METHOD
CONTACT LENS CLEANING SOLUTION
CONTACT LENS CLEANING SOLUTION AND METHOD FOR CLEANING CONTACT LENSES USING THE SAME
CONTACT LENS CLEANING SOLUTION OVERFLOW COLLECTOR
CONTACT LENS CLEANING SYSTEM
CONTACT LENS COATING SELECTION AND MANUFACTURING PROCESS
CONTACT LENS COMPRISING A VIOLET TINT
CONTACT LENS CONTAINING A LEACHABLE ABSORBED MATERIAL
CONTACT LENS DATE STORAGE CONTAINER
CONTACT LENS DESIGN
CONTACT LENS DESIGNED TO ACCOMMODATE AND CORRECT FOR THE EFFECTS OF PRESBYOPIA
CONTACT LENS DISINFECTING COMPOSITIONS AND METHODS EMPLOYING TERPENES
CONTACT LENS DISINFECTING DEVICE AND DISINFECTION SYSTEM
CONTACT LENS DISINFECTING SOLUTION
CONTACT LENS DISINFECTING SOLUTION CONTAINING SODIUM CHLORITE AND POLYVINYL PYRROLIDONE
CONTACT LENS DISINFECTING SYSTEM
CONTACT LENS DISINFECTION UNIT WITH INVERTIBLE LENS HOLDING BASKETS
CONTACT LENS DISPENSING SYSTEM
CONTACT LENS ELEMENT FOR EXAMINATION OR TREATMENT OF OCULAR TISSUES
CONTACT LENS FITTER-REMOVER
CONTACT LENS FOR INTRAOCULAR OBSERVATION
CONTACT LENS FOR USE WITH OPHTHALMIC MONITORING SYSTEMS
CONTACT LENS HANDLING DEVICE
CONTACT LENS HAVING A PHARMACEUTICAL AGENT RELEASABLY DISPOSED THEREIN
CONTACT LENS HAVING A UNIFORM HORIZONTAL THICKNESS PROFILE
CONTACT LENS HAVING AN OPTICAL ZONE HAVING AT LEAST ONE FOCAL POINT
CONTACT LENS HAVING IMPROVED DIMENSIONAL STABILITY
CONTACT LENS HAVING POSITION STABILIZATION
CONTACT LENS HOLDER
CONTACT LENS HOLDER AND TREATING DEVICE
CONTACT LENS HOLDING DEVICE |
|
Inventions Browse
Copyright © Philip M. Parker, INSEAD. Terms of Use.