Copyright © Philip M. Parker, INSEAD. Terms of Use.
| ALTERNATING PHASE MASK
ALTERNATING PHASE SHIFT MASK AND METHOD FOR FABRICATING THE ALIGNMENT MONITOR
ALTERNATING PHASE SHIFT MASK DESIGN CONFLICT RESOLUTION
ALTERNATING PHASE SHIFT MASK DESIGN WITH OPTIMIZED PHASE SHAPES
ALTERNATING PHASE SHIFTING MASK
ALTERNATING PHASE SHIFTING MASKS
ALTERNATING PHASE-SHIFTING MASK
ALTERNATING PISTON ROTARY ENGINE WITH UNIDIRECTIONAL TRANSMISSION DEVICES
ALTERNATING POLARITY CARRY LOOK AHEAD ADDER CIRCUIT
ALTERNATING POLE AC MOTOR/GENERATOR WITH TWO INNER ROTATING ROTORS AND AN EXTERNAL STATIC STATOR
ALTERNATING PRESSURE APPARATUS FOR OBTAINING OXYGEN FROM THE AIR AND METHOD FOR THE OPERATION THEREOF
ALTERNATING PRESSURE MATTRESS SYSTEM AND METHOD
ALTERNATING PRESSURE METHOD FOR CELLULITE REDUCTION
ALTERNATING PRESSURE PAD
ALTERNATING PRESSURE SUPPORT PAD
ALTERNATING PRESSURE VALVE SYSTEM
ALTERNATING REFERENCE WORDLINE SCHEME FOR FAST DRAM
ALTERNATING RIBBED FOOT MASSAGER
ALTERNATING RIM PHASE-SHIFTING MASK
ALTERNATING RODENT INSECT TRAP
ALTERNATING SEAM FOR GARMENTS AND METHOD OF SEWING THE ALTERNATING SEAM
ALTERNATING SHADOW DIRECTORIES IN PAIRS OF STORAGE SPACES FOR DATA STORAGE
ALTERNATING SHEET EVAPORATIVE COOLING PAD
ALTERNATING SPEECH AND DATA TRANSMISSION IN DIGITAL COMMUNICATIONS SYSTEMS
ALTERNATING STATE PRESSURE REGULATION VALVED DAMPER
ALTERNATING SUCTION BREASTPUMP ASSEMBLY AND METHOD
ALTERNATING TIME BAND SEQUENCE "ATBS-2W"
ALTERNATING TIP RUN PROCESS FOR PIPE CLEANING
ALTERNATING TOP AND BOTTOM FELTED DRYERS CONNECTED WITHOUT OPEN DRAW
ALTERNATING TREE-BASED CLASSIFIERS AND METHODS FOR LEARNING THEM
ALTERNATING VELOCITY ROTARY ENGINE EMPLOYING A GEAR CONTROL MECHANISM
ALTERNATING VOLTAGE DETECTOR
ALTERNATING WASH/DRY WATER SCRUBBER ENTRY
ALTERNATING-CURRENT ELECTRIC POWER CONTROLLING APPARATUS AND METHOD FOR CONTROLLING SUPPLY OF ALTERNATING-CURRENT ELECTRIC POWER TO ELECTRIC LOAD
ALTERNATING-CURRENT GENERATING APPARATUS FOR AN AUTOMOTIVE VEHICLE
ALTERNATING-CURRENT GENERATOR FOR VEHICLES AND HEAT SINK INCORPORATED THEREIN
ALTERNATING-CURRENT GENERATOR WITH STATOR CENTER LAMINATION AND METHOD FOR PRODUCING THE CENTER LAMINATION
ALTERNATING-CURRENT PLASMA DISPLAY PANEL
ALTERNATING-CURRENT-DRIVEN-TYPE PLASMA DISPLAY
ALTERNATING-POLARITY OPERATION FOR COMPLETE REGENERATION OF ELECTROCHEMICAL DEIONIZATION SYSTEM
ALTERNATING-RESILIENCE ENGINE MOUNT
ALTERNATIVE BACKING UP PUMP FOR TURBOMOLECULAR PUMPS
ALTERNATIVE BIN CART
ALTERNATIVE BLOCK ORDERS FOR BETTER PREDICTION
ALTERNATIVE BLOCKING FOR ROOF SYSTEMS
ALTERNATIVE BODY CONTACT FOR FULLY-DEPLETED SILICON-ON-INSULATOR TRANSISTORS
ALTERNATIVE CAMERA CARRY-STRAP AND LENS CAP
ALTERNATIVE CARRIER SELECTION ON REPEAT EMERGENCY CALLS
ALTERNATIVE CD-ROM/DVD PACKAGING DEVICE
ALTERNATIVE CHARGING METHOD FOR ENGINE WITH PRESSURIZED VALVED CELL
ALTERNATIVE COLD SHRINK DEVICE
ALTERNATIVE COLD SHRINK DEVICE AND METHOD OF EMPLOYING SAME
ALTERNATIVE CONFIGURATIONS FOR AN ADSL SYSTEM OPERATING IN A TIME DUPLEX NOISE ENVIRONMENT
ALTERNATIVE CURRENT PATHWAYS FOR BIPOLAR SURGICAL CUTTING TOOL
ALTERNATIVE CURRENT PLASMA DISPLAY PANEL WITH DIELECTRIC SUB-LAYERS
ALTERNATIVE DETECTOR CONFIGURATION AND MODE OF OPERATION OF A TIME DELAY INTEGRATION PARTICLE ANALYZER
ALTERNATIVE DIRECT AND COMBINED DIRECT-INDIRECT LIGHT REFLECTING DEVICE
ALTERNATIVE DISPLAY STATE MEDICAL PHOTOGRAPHIC INSTRUMENT
ALTERNATIVE DOPING FOR ALGAINP LASER DIODES FABRICATED BY IMPURITY-INDUCED LAYER DISORDERING (IILD)
ALTERNATIVE DRIVE POWER ARRANGEMENT HAVING AN ELECTRIC MOTOR WITH MULTIPLE ARMATURES
ALTERNATIVE DYE-LABELED PRIMERS FOR AUTOMATED DNA SEQUENCING
ALTERNATIVE DYE-LABELED RIBONUCLEOTIDES, DEOXYRIBONUCLEOTIDES, AND DIDEOXYRIBONUCLEOTIDES FOR AUTOMATED DNA ANALYSIS
ALTERNATIVE ELECTRODE SUPPORTS AND GAS DISTRIBUTORS FOR MOLTEN CARBONATE FUEL CELL APPLICATIONS
ALTERNATIVE ENZYME SUBSTRATES AS DEODORANTS
ALTERNATIVE FABRICATION METHOD FOR SPIRAL ELECTRODES
ALTERNATIVE FEEDING FROM ROLL OR BOX INTO LASER PRINTER
ALTERNATIVE FLASH EEPROM SEMICONDUCTOR MEMORY SYSTEM
ALTERNATIVE FREQUENCY SERVICE VERIFICATION
ALTERNATIVE FUEL
ALTERNATIVE FUEL FOR USE IN A DIESEL ENGINE-POWERED EMERGENCY GENERATOR FOR INTERMITTENT USE IN FIXED INSTALLATIONS
ALTERNATIVE FUEL SYSTEM FOR POWERED INDUSTRIAL VEHICLE
ALTERNATIVE FUEL TO GASOLINE
ALTERNATIVE FUELS VEHICLE AND FUEL-SYSTEM VALVE USED THEREIN
ALTERNATIVE G-COUPLED RECEPTORS ASSOCIATED WITH RETROVIRAL ENTRY INTO CELLS, METHODS OF IDENTIFYING THE SAME, AND DIAGNOSTIC AND THERAPEUTIC USES THEREOF
ALTERNATIVE GOLF BAG
ALTERNATIVE INK/CLEANER CARTRIDGE
ALTERNATIVE LIQUID ENVIRONMENT MEASUREMENT SYSTEM AND METHOD
ALTERNATIVE MEDICINE ELEMENTS PACKAGE
ALTERNATIVE MESSAGE USAGE FOR VOICE MAIL RETREIVAL VIA REVERTIVE CALLING
ALTERNATIVE METALLIC SEALS
ALTERNATIVE METHOD FOR SEALING ALL-METAL VACUUM JOINTS
ALTERNATIVE MONO-DIRECTION AND DUAL-DIRECTION TRANSMISSION APPARATUS
ALTERNATIVE OPEN READING FRAME DNA OF A NORMAL GENE AND A NOVEL HUMAN CANCER ANTIGEN ENCODED THEREIN
ALTERNATIVE PATH CONTROL SYSTEM AND METHOD
ALTERNATIVE PHOTORESIST STRIPPING SOLUTIONS
ALTERNATIVE PICKUP TRUCK TAILGATE
ALTERNATIVE PLASMA CHEMISTRY FOR ENHANCED PHOTORESIST REMOVAL
ALTERNATIVE POLYOLEFIN COMPOSITE VEIL/COMPATIBILIZING MAT MATERIAL
ALTERNATIVE POWER FOR A PORTABLE COMPUTER VIA SOLAR CELLS
ALTERNATIVE POWER SUPPLY CONNECTION
ALTERNATIVE POWER SUPPLY SYSTEM FOR REPLACEMENT OF NICKEL-CADMIUM BATTERY PACKS
ALTERNATIVE PROCESS FOR BPTEOS/BPSG LAYER FORMATION
ALTERNATIVE PROFILING METHODOLOGY AND TOOL FOR ANALYZING COMPETITIVE BENCHMARKS
ALTERNATIVE PSM WITH NEW PHASE CONFLICT CANCELING METHOD
ALTERNATIVE RECONSTRUCTION METHOD FOR NON-EQUIDISTANT K-SPACE DATA
ALTERNATIVE REFRIGERANT INCLUDING HEXAFLUOROPROPYLENE
ALTERNATIVE RELATED TO SAS IN FLASH EEPROM
ALTERNATIVE ROUTING SYSTEM FOR MOBILE TELEPHONE CALLS
ALTERNATIVE SILICON CHIP GEOMETRIES FOR INTEGRATED CIRCUITS
ALTERNATIVE SOLVENTS FOR A METHOD OF RECLAIMING STYRENE AND OTHER PRODUCTS FROM POLYSTYRENE BASED MATERIALS
ALTERNATIVE SPLICE VARIANTS OF CD40
ALTERNATIVE STRUCTURE TO SOI USING PROTON BEAMS
ALTERNATIVE SUBSTRATES FOR EPITAXIAL GROWTH
ALTERNATIVE TO THROUGH-HOLE-PLATING IN A PRINTED CIRCUIT BOARD
ALTERNATIVE TREATMENT OF A NONSURGICALLY TREATABLE INTRACRANIAL OCCLUSION
ALTERNATIVE UNIVERSAL LONG FREE VORTEX CYLINDRICAL CYCLONE METHOD
ALTERNATIVE USE OF MILITARY PROPELLANTS AS NOVEL BLASTING AGENTS
ALTERNATIVE VIDEO SYNC DETECTOR
ALTERNATIVE VOLTAGE STABILIZER FOR IMPROVING TRANSIENT RESPONSE AND INCREASING AREA OF VOLTAGE STABILIZED
ALTERNATIVELY TARGETED ADENOVIRUS
ALTERNATOR
ALTERNATOR AND METHOD OF MANUFACTURE
ALTERNATOR AND METHOD OF MANUFACTURE THEREFOR
ALTERNATOR ASSEMBLY
ALTERNATOR BEARING DEPTH SETTING TOOL
ALTERNATOR BEARING SLEEVE, BRUSH HOLDER, AND CAP SYSTEM
ALTERNATOR CIRCUIT FOR USE IN A LIQUID LEVEL CONTROL SYSTEM
ALTERNATOR CONTROL SYSTEM
ALTERNATOR CONTROLLER
ALTERNATOR COOLING DEVICE
ALTERNATOR DIAGNOSTIC SYSTEM
ALTERNATOR DRIVEN ELECTROMAGNETIC LAUNCHING SYSTEM
ALTERNATOR FAN
ALTERNATOR FIELD CURRENT CONTROL FOR ACTIVE DRIVELINE DAMPING
ALTERNATOR FOR A MOTOR VEHICLE HAVING A VENTILATOR AND DEVICE FOR MONITORING AND A CONTROLLING THE VENTILATOR
ALTERNATOR FOR AN AUTOMOTIVE VEHICLE
ALTERNATOR FOR MOTOR VEHICLES AND MANUFACTURING METHOD THEREOF
ALTERNATOR FOR USE IN A VEHICLE
ALTERNATOR FOR USE IN AN AUTOMOBILE
ALTERNATOR FOR VEHICLE
ALTERNATOR FOR VEHICLES
ALTERNATOR FOR VEHICLES HAVING PERMANENT MAGNETS IN ROTOR
ALTERNATOR HAVING A STARTER WITH NON-UNIFORMLY PITCHED SLOTS
ALTERNATOR HAVING PASSAGE FOR VENTILATING SLIP-RING SURFACE
ALTERNATOR HAVING VACUUM PUMP CAPABLE OF IMPROVING COOLING CHARACTERISTIC
ALTERNATOR HYBRID MAGNET ROTOR DESIGN
ALTERNATOR INCLUDING ADAPTORS FOR RECTIFIER BRIDGE DIODES, IN PARTICULAR FOR A MOTOR VEHICLE, AND AN ADAPTOR FOR SUCH AN ALTERNATOR
ALTERNATOR JUMP CHARGING SYSTEM
ALTERNATOR MOUNTING BRACKET
ALTERNATOR PERMANENT MAGNET ROTOR DESIGN
ALTERNATOR POWER CONVERTER
ALTERNATOR POWER SUPPLIED ELECTRIC HEATER
ALTERNATOR POWER-SUPPLY TYPE ELECTRIC HEATING CONTROL APPARATUS
ALTERNATOR POWERED ELECTRICALLY HEATED CATALYST
ALTERNATOR PULLEY
ALTERNATOR PULLEY UNIT WITH A BUILT-IN ONE-WAY CLUTCH
ALTERNATOR RECTIFICATION, REGULATION, AND CONTROL CIRCUIT
ALTERNATOR RECTIFIER ASSEMBLY CONNECTION CONVERSION MEANS AND METHOD
ALTERNATOR REGULATION CIRCUIT HAVING PARALLEL FIELD COIL CURRENT RE-CIRCULATION
ALTERNATOR REGULATION OF UNBALANCED CURRENTS WITH TEMPERATURE COMPENSATION
ALTERNATOR REGULATOR
ALTERNATOR RINGS AND CYLINDRICAL COMMUTATORS MADE OF A SINTERED COPPER-GRAPHITE COMPOSITE MATERIAL
ALTERNATOR ROTOR COIL
ALTERNATOR ROTOR SHAFT
ALTERNATOR STARTER
ALTERNATOR STATOR COIL TERMINAL CONNECTOR POST ASSEMBLY
ALTERNATOR STATOR COIL TERMINAL CONNECTOR POST ASSEMBLY KIT
ALTERNATOR SUPPLY AND CONTROL UNIT
ALTERNATOR SYSTEM
ALTERNATOR SYSTEM FOR A VEHICLE
ALTERNATOR TESTER
ALTERNATOR TESTER WITH IMPROVED HEAT DISSIPATION
ALTERNATOR TESTING APPARATUS AND METHOD
ALTERNATOR TESTING METHOD AND SYSTEM USING TIMED APPLICATION OF LOAD
ALTERNATOR USED BOTH AS A GENERATOR AND AS A MOTOR FOR STARTING THE ENGINE OF A SELF-PROPELLED VEHICLE
ALTERNATOR WINDING ARRANGEMENT WITH COIL ENDS SPACED APART FROM ONE ANOTHER FOR AIR PASSAGE
ALTERNATOR WITH AN ELECTRIC CONTACT BEARING ASSEMBLY
ALTERNATOR WITH AN IMPROVED BATTERY TERMINAL ASSEMBLY
ALTERNATOR WITH COOLING AIR GUIDE FORMED BY BEARING HOUSING HAVING GUIDING PORTION
ALTERNATOR WITH EXCITING MEANS ARRANGEMENT
ALTERNATOR WITH GENERALLY TRIANGULAR ENGINE-MOUNTING STAYS
ALTERNATOR WITH IMPROVED COOLING MEANS, ESPECIALLY FOR MOTOR VEHICLES
ALTERNATOR WITH INTERNAL AND EXTERNAL FANS
ALTERNATOR WITH INTERNAL RECTIFIER BRIDGE ASSEMBLY
ALTERNATOR WITH INTERPOLAR MAGNETS FOR A MOTOR VEHICLE
ALTERNATOR WITH MAGNETIC NOISE REDUCTION MECHANISM
ALTERNATOR WITH MECHANICALLY ADJUSTABLE OUTPUT
ALTERNATOR WITH PERMANENT MAGNET ROTOR HAVING PRIMARY MAGNETS AND BLOCKING-POLE MAGNETS
ALTERNATOR WITH REGULATION OF MULTIPLE VOLTAGE OUTPUTS
ALTERNATOR, IN PARTICULAR FOR A MOTOR VEHICLE INCLUDING AN IMPROVED ARRANGEMENT OF RECTIFIER DIODES
ALTERNATOR, STATOR WINDING ASSEMBLY THEREFOR, AND METHOD OF MANUFACTURE FOR THE STATOR WINDING ASSEMBLY
ALTERNATOR/INVERTER WITH DUAL H-BRIDGE
ALTERNATOR/INVERTER WITH DUAL H-BRIDGE AND AUTOMATIC VOLTAGE REGULATION
ALTERNATOR/INVERTOR REFRIGERATION UNIT
ALTERNATOR/STARTER TESTING DEVICE
ALTERNATOR-CHARGING SYSTEM FAULT DETECTOR
ALTIMETER HAVING CORRECTABLE DIGITIZER AND METHOD OF USE
ALTIMETRIC TYPE MEASUREMENT METHOD FOR USE ON A SATELLITE
ALTIMETRY METHOD
ALTITUDE ADJUSTMENT METHOD AND APPARATUS
ALTITUDE AND VERTICAL SPEED INDICATOR FOR AIRCRAFT
ALTITUDE COMPENSATING WASTEGATE CONTROL SYSTEM FOR A TURBOCHARGER
ALTITUDE COMPENSATION FOR SPARK-IGNITED TURBOCHARGED INTERNAL COMBUSTION ENGINES
ALTITUDE COMPENSATION FOR TURBOCHARGER WASTEGATE
ALTITUDE CORRECTION FOR AIRCRAFT UNDER NON-ISA TEMPERATURE CONDITIONS
ALTITUDE DECISION SYSTEM AND AN ENGINE OPERATING PARAMETER CONTROL SYSTEM USING THE SAME
ALTITUDE DEPENDENT FUEL INJECTION TIMING
ALTITUDE DETECTION BY USE OF PLANAR APPROXIMATION OF A REGION OF GROUND SURFACE
ALTITUDE ESTIMATION SYSTEM AND METHOD
ALTITUDE GAS TURBINE ENGINE TEST CELL
ALTITUDE INSENSITIVE AIR BEARING SLIDER
ALTITUDE INSENSITIVE AIR BEARING USING PITCH COMPENSATION FOR DATA STORAGE APPLICATION
ALTITUDE INSENSITIVE DISC HEAD SLIDER
ALTITUDE LOSS AFTER TAKE-OFF WARNING SYSTEM UTILIZING TIME AND ALTITUDE
ALTITUDE MASK SIMULATOR
ALTITUDE SIMULATION METHOD AND SYSTEM
ALTITUDE SIMULATOR FOR DYNAMOMETER TESTING
ALTITUDE SPARSE AIRCRAFT DISPLAY
ALTITUDE TAPE AND INTEGRAL VERTICAL SPEED INDICATOR
ALTITUDE TAPE FOR AIRCRAFT DISPLAYS
ALTITUDE/TEMPERATURE COMPENSATION FOR A GAS-FILLED WEIGHT SENSOR
ALTITUDE-SENSITIVE PORTABLE STEREO SOUND SET FOR DANCERS
ALU IMPLEMENTATION IN SINGLE PLD LOGIC CELL
ALUMIMUM TRICHLORIDE CATALYZED HYDROGENATION OF HIGH-BOILING RESIDUE FROM DIRECT PROCESS
ALUMINA ABRASIVE WHEEL WITH IMPROVED CORNER HOLDING
ALUMINA AGGLOMERATES AND PROCESS FOR THE PREPARATION THEREOF
ALUMINA BASE CERAMIC SINTERED BODY AND ITS MANUFACTURING METHOD
ALUMINA BASED ADSORBENT CONTAINING ALKALI METAL COMPOUNDS
ALUMINA BASED CERAMIC MATERIAL AND METHOD OF MANUFACTURING THE SAME
ALUMINA BODIES CONTAINING ALKALI OR ALKALINE EARTH METAL COMPOUNDS
ALUMINA BODY FORMATION USING HIGH PH
ALUMINA BONDED ABRASIVE FOR CAST IRON
ALUMINA CATALYST SUPPORT PREPARATION
ALUMINA CATALYSTS SUPPORT MANUFACTURE
ALUMINA CERAMIC ARTICLES HAVING CUBIC SPINEL ON SURFACES AND METHODS FOR PREPARING ALUMINA CERAMIC ARTICLES AND FOR SINTERING
ALUMINA CERAMIC COMPOSITION
ALUMINA CERAMIC PRODUCTS
ALUMINA CERAMIC-METAL ARTICLES
ALUMINA CLAY COMPOSITIONS
ALUMINA COATED CEMENTED CARBIDE BODY
ALUMINA COATED CUTTING TOOL
ALUMINA COATED TOOL AND PRODUCTION METHOD THEREOF
ALUMINA COATED WITH A LAYER OF CARBON AS AN ABSORBENT
ALUMINA COMPOSITION, ALUMINA MOLDED ARTICLE, ALUMINA CERAMICS, AND PROCESS FOR PRODUCING CERAMICS
ALUMINA CRYSTAL GROWTH ADDITIVE
ALUMINA DISPERSANT, ALUMINA DISPERSION LIQUID, AGENT FOR TREATING INKJET-PRINTING MATERIALS, AND INKJET-PRINTING MATERIALS
ALUMINA DISTRIBUTION IN ELECTROLYSIS CELLS INCLUDING INERT ANODES USING BUBBLE-DRIVEN BATH CIRCULATION
ALUMINA ENCAPSULATED STRAIN GAGE, NOT MECHANICALLY ATTACHED TO THE SUBSTRATE, USED TO TEMPERATURE COMPENSATE AN ACTIVE HIGH TEMPERATURE GAGE IN A HALF-BRIDGE CONFIGURATION
ALUMINA EXTRUDATES, METHODS FOR PREPARING AND USE AS CATALYSTS SUPPORTS
ALUMINA FIBER AGGREGATE AND ITS PRODUCTION METHOD
ALUMINA FIBER STRUCTURE AND PROCESS FOR ITS PRODUCTION
ALUMINA FILLED GELATIN
ALUMINA HYDRATE COATING FLUID, RECORDING SHEET AND RECORDED PRODUCT
ALUMINA HYDRATES
ALUMINA INSULATION FOR COATING IMPLANTABLE COMPONENTS AND OTHER MICROMINIATURE DEVICES
ALUMINA MATERIAL USEFUL WITH THIN FILM HEADS
ALUMINA MULTILAYER WIRING SUBSTRATE PROVIDED WITH HIGH DIELECTRIC MATERIAL LAYER
ALUMINA PACKAGE FOR HERMETICALLY CONTAINING AN ELECTRONIC DEVICE THEREIN
ALUMINA PARTICLES HAVING HIGH DISPERSIBILITY AND PLASTICITY | ALUMINA PLATE METHOD AND DEVICE FOR CONTROLLING TEMPERATURE
ALUMINA POWDER, PROCESS FOR PRODUCING THE SAME AND POLISHING COMPOSITION
ALUMINA RECESSION DETERMINATION USING A FLYING HEIGHT TESTER
ALUMINA REDUCTION CELL
ALUMINA REINFORCED RUBBER COMPOSITION WHICH CONTAINS TETRATHIODIPROPIONIC AND/OR TRITHIODIPROPIONIC ACID COUPLING AGENT AND ARTICLE OF MANUFACTURE, INCLUDING A TIRE, HAVING AT LEAST ONE COMPONENT COMPRISED OF SUCH RUBBER COMPOSITION
ALUMINA SHORT FIBER REINFORCED MAGNESIUM ALLOY HAVING STABLE OXIDE BINDERS
ALUMINA SINTERED BODIES AND METHOD FOR PRODUCING THE SAME
ALUMINA SINTERED BODY
ALUMINA SINTERED COMPACT AND METHOD OF PRODUCING THE SAME, AND ARTICLE FOR HEAT TREATMENT USING ALUMINA SINTERED COMPACT
ALUMINA SINTERED PRODUCT
ALUMINA SOL AND RECORDING SHEET
ALUMINA SOL COATED RECORDING SHEET
ALUMINA SOL, ALUMINA HYDRATE POWDER AND PROCESSES FOR THEIR PRODUCTION
ALUMINA SOL, PROCESS FOR PREPARING THE SAME, PROCESS FOR PREPARING ALUMINA MOLDING USING THE SAME, AND ALUMINA-BASED CATALYST PREPARED THEREBY
ALUMINA SOL-GEL FIBER
ALUMINA SOURCE FOR NON-ZEOLITIC MOLECULAR SIEVES
ALUMINA SUPPLY APPARATUS FOR ELECTROLYTIC SMELTER
ALUMINA TRIHYDRATE DERIVED HIGH PORE VOLUME, HIGH SURFACE AREA ALUMINUM OXIDE COMPOSITES AND METHODS OF THEIR PREPARATION AND USE
ALUMINA WELLBORE CEMENT COMPOSITION
ALUMINA, CALCIA, YTTRIA SEALING COMPOSITION
ALUMINA/ZEOLITE LEAN NOX CATALYST
ALUMINA-ALKALI METAL ALUMINUM SILICATE AGGLOMERATE ACID ADSORBENTS
ALUMINA-ALUMINUM NITRIDE-NICKEL COMPOSITES
ALUMINA-BASED ABRASIVE GRAINS AND METHOD FOR PREPARING SAME
ALUMINA-BASED ADSORBENTS FOR THE PURIFICATION OF POLYOLEFINS
ALUMINA-BASED CATALYST FOR THE TREATMENT OF GASES CONTAINING SULPHUR COMPOUNDS, USE OF THESE CATALYSTS FOR THE TREATMENT AND PROCESSES FOR TREATMENT OF THE SAID GASES
ALUMINA-BASED CERAMIC COMPOSITE
ALUMINA-BASED CERAMIC FOR SINTERING, METHOD OF MANUFACTURE AND SLIDING PARTS OBTAINED THEREBY
ALUMINA-BASED CERAMICS MATERIALS, ABRASIVE MATERIALS AND METHOD FOR THE MANUFACTURE OF THE SAME
ALUMINA-BASED COMPOSITE SINTERED MATERIAL, WEAR RESISTANT MEMBER AND A METHOD OF MANUFACTURING ALUMINA BASED COMPOSITE SINTERED MATERIAL
ALUMINA-BASED COMPOSITIONS AND CATALYSTS HAVING HIGH SPECIFIC SURFACE AREA
ALUMINA-BASED HYDROPHILIC ANTIMICROBIAL COATING
ALUMINA-BASED PROTECTIVE COATING FOR CERAMIC MATERIALS
ALUMINA-BASED SINTERED BODY INSULATOR FOR SPARK PLUGS
ALUMINA-BASED SINTERED MATERIAL
ALUMINA-BASED SINTERED MATERIAL FOR CERAMIC HEATER
ALUMINA-BASED SINTERED MATERIALS AND PROCESS FOR PRODUCING THE SAME
ALUMINA-BOUND HIGH STRENGTH CERAMIC HONEYCOMBS
ALUMINA-CARBON COMPOSITIONS AND SLIDEGATE PLATES MADE THEREFROM
ALUMINA-COATED SINTERED BODY
ALUMINA-CONTAINING CARRIER AND HYDROFINING CATALYST FOR HYDROCARBON OILS
ALUMINA-MAGNESIA OXIDE, METHOD OF MAKING THE SAME, AND FINE PULVERULENT BODY OF THE SAME
ALUMINA-MAGNESIA-GRAPHITE REFRACTORY
ALUMINA-RARE EARTH OXIDE CERAMIC-METAL BODIES
ALUMINA-SILICA CERAMIC
ALUMINA-SILICA RESIN ADDITIVE
ALUMINA-SILICA-SULFATES, METHOD OF PREPARATION AND COMPOSITIONS
ALUMINA-SILICON CARBIDE-CARBON REFRACTORY CASTABLE CONTAINING MAGNESIUM ALUMINATE SPINEL
ALUMINA-SPINEL TYPE MONOLITHIC REFRACTORIES
ALUMINA-SUPPORTED RUTHENIUM CATALYST
ALUMINA-ZIRCONIA CERAMIC
ALUMINA-ZIRCONIA REFRACTORY MATERIAL AND ARTICLES MADE THEREFROM
ALUMINA-ZIRCONIA SINTERED BODY, PRODUCTION THEREOF, AND IMPACT GRINDER USING SAID ALUMINA-ZIRCONIA SINTERED BODY
ALUMINATE COMPLEX AND USE THEREOF IN PHOTOPOLYMERIZABLE COMPOSITION AND IMAGE-FORMING MATERIAL
ALUMINATE PHOSPHOR
ALUMINATE PHOSPHOR AND PROCESS FOR ITS PRODUCTION, PHOSPHOR PASTE COMPOSITION, AND VACUUM ULTRAVIOLET RAY EXCITATION TYPE LIGHT-EMITTING DEVICE
ALUMINATE PHOSPHOR WITH A POLYPHOSPHATE COATING
ALUMINATE PHOSPHOR, PROCESS FOR PREPARING THE SAME, AND VACUUM ULTRAVIOLET-EXCITED LIGHT EMITTING DEVICE
ALUMINIDE COATED BEARING ELEMENTS FOR ROLLER CUTTER DRILL BITS
ALUMINIDE FOR USE IN HIGH-TEMPERATURE ENVIRONMENTS
ALUMINIDE/MCRALY COATING SYSTEM FOR SUPERALLOYS
ALUMINIDE-SILICIDE COATINGS COATED PRODUCTS
ALUMINIDE-SILICIDE COATINGS, COATING COMPOSITIONS, PROCESS FOR COATING AND IMPROVED COATED PRODUCTS
ALUMINIDING OF A METALLIC SURFACE USING AN ALUMINUM-MODIFIED MASKANT, AND ALUMINUM-MODIFIED MASKANT
ALUMINIUM ALLOY AND EXTRUSION
ALUMINIUM ALLOY BRAZING SHEET
ALUMINIUM ALLOY CONTAINING MAGNESIUM AND SILICON
ALUMINIUM ALLOY FOR AN ANTI-FRICTION ELEMENT
ALUMINIUM ALLOY FOR USE AS CORE MATERIAL IN BRAZING SHEET
ALUMINIUM ALLOY FOR USE IN A BRAZED ASSEMBLY
ALUMINIUM ALLOY PLATE AND METHOD FOR ITS MANUFACTURE
ALUMINIUM ALLOY POWDER BLENDS AND SINTERED ALUMINIUM ALLOYS
ALUMINIUM ALLOY SEMI-FINISHED PRODUCT MANUFACTURING PROCESS USING RECYCLED RAW MATERIALS
ALUMINIUM ALLOY, NOTABLY FOR A LAYER
ALUMINIUM ALLOYS
ALUMINIUM BATTERY WITH ELECTROLYTE CIRCULATION MEANS
ALUMINIUM BEARING ALLOY CONTAINING BISMUTH
ALUMINIUM DIE-CASTING ALLOY
ALUMINIUM ELECTROWINNING CELL WITH SIDEWALLS RESISTANT TO MOLTEN ELECTROLYTE
ALUMINIUM ELECTROWINNING CELLS HAVING A V-SHAPED CATHODE BOTTOM AND METHOD OF PRODUCING ALUMINIUM
ALUMINIUM EXTRUSION ALLOY
ALUMINIUM NITRIDE CERAMICS AND METHOD FOR PREPARING THE SAME
ALUMINIUM OR ALUMINIUM ALLOY MOULDING PROCESS LUBRICANT, AND ALUMINIUM OR ALUMINIUM ALLOY PLATE FOR MOULDING PROCESSES
ALUMINIUM PIGMENT
ALUMINIUM POLYCHLOROSULPHATES, PROCESS FOR THEIR PREPARATION AND USE THEREOF
ALUMINIUM PROCESSING APPARATUS AND PROCESS FOR SEPARATING ALUMINIUM FROM A MIXTURE OF ALUMINIUM AND ALUMINIUM DROSS
ALUMINIUM PRODUCTION CELL AND ASSEMBLY
ALUMINIUM PRODUCTION CELL DESIGN
ALUMINIUM PRODUCTION CELL WITH AN INSULATING COVER HAVING INDIVIDUALLY REMOVABLE SECTIONS
ALUMINIUM REFLECTOR WITH COMPOSITE REFLECTIVITY-ENHANCING SURFACE LAYER
ALUMINIUM SALTS OF ALKYLHYDROXYMETHYLPHOSPHINIC ACIDS
ALUMINIUM SECTION MEMBER ASSEMBLY WITH A THERMAL BRIDGE GAP FOR WINDOW AND DOOR FRAMES
ALUMINIUM SHEET WITH ROUGH SURFACE
ALUMINIUM SMELTING CELL
ALUMINIUM WORKPIECE
ALUMINIUM-IMMERSED ASSEMBLY AND METHOD FOR ALUMINIUM PRODUCTION CELLS
ALUMINIUM-LITHIUM ALLOY
ALUMINIUM-MAGNESIUM ALLOY PLATE OR EXTRUSION
ALUMINIUM-MAGNESIUM WELD FILLER ALLOY
ALUMINIUM-SALT IMPREGNATED FIBRES, A METHOD FOR THEIR MANUFACTURE, FLUFF CONSISTING OF SUCH FIBRES, AND THE USE OF THE FIBRES AS ABSORPTION MATERIAL
ALUMINIUM-STRONTIUM MASTER ALLOY AND PROCESS OF MAKING THE ALLOY
ALUMINIZED EUTECTIC BONDED INSENSITIVE HIGH EXPLOSIVE
ALUMINIZED PLATEAU-BURNING SOLID PROPELLANT FORMULATIONS AND METHODS FOR THEIR USE
ALUMINIZED ROLL INCLUDING ANODIZATION LAYER
ALUMINIZED STEEL ALLOYS CONTAINING CHROMIUM
ALUMINIZED STEEL ALLOYS CONTAINING CHROMIUM AND METHOD FOR PRODUCING SAME
ALUMINIZING PROCESS FOR PLASMA-SPRAYED BOND COAT OF A THERMAL BARRIER COATING SYSTEM
ALUMINO-SILICATE DERIVATIVES
ALUMINOBORONATE ACTIVATORS FOR SINGLE-SITE OLEFIN POLYMERIZATION CATALYSTS
ALUMINOFLUOROSILICATE GLASS
ALUMINOPHOSPHATE GLASS CONTAINING COPPER(II) OXIDE
ALUMINOPHOSPHATES AND THEIR METHOD OF PREPARATION
ALUMINOSILICATE
ALUMINOSILICATE CARRIER FOR METATHESIS CATALYSTS
ALUMINOSILICATE CATALYST, A PROCESS FOR THE MANUFACTURE THEREOF AND A PROCESS FOR THE SKELETAL ISOMERIZATION OF LINEAR OLEFINS
ALUMINOSILICATE CATION EXCHANGE COMPOUNDS
ALUMINOSILICATE COMPOSITIONS AS PARTIAL REPLACEMENT FOR TITANIUM DIOXIDE IN PIGMENTED POLYVINYL CHLORIDE AND POLYVINYL CHLORIDE TYPE COMPOSITIONS
ALUMINOSILICATE GLASS FOR FLAT DISPLAY DEVICES
ALUMINOSILICATE GLASS PRESSURE TRANSDUCER
ALUMINOSILICATE MOLECULAR SIEVE
ALUMINOSILICATE ORGANIC-INORGANIC POLYMER
ALUMINOSILICATE STABILIZED HALOGENATED POLYMERS
ALUMINOSILICATES
ALUMINOSILICATES AND DETERGENT COMPOSITION
ALUMINOSILOXANE COMPOUND AND PROCESS FOR PREPARING THE SAME
ALUMINOSILOXANES, TITANOSILOXANES, (POLY)STANNOSILOXANES, AND THEIR PREPARATION
ALUMINOTHERMIC MIXTURE WITH FERROCHROMIUM ALLOY
ALUMINOTHERMIC WELDING DEVICE CRUCIBLE AND CRUCIBLE COVER FOR USE THEREWITH
ALUMINOUS PRESS PLATE AND PROCESS FOR PRODUCING SAME
ALUMINOXANATE COMPOSITIONS
ALUMINOXANE MODIFICATION
ALUMINOXANE PROCESS AND PRODUCT
ALUMINOXANE SYNTHESIS EMPLOYING REDUCED AMOUNT OF TRIALKYLALUMINUM COMPOUND
ALUMINOXANES HAVING INCREASED CATALYTIC ACTIVITY
ALUMINUM ALKOXIDE SYNTHESIS WITH TITANIUM AS A CATALYST
ALUMINUM ALKYL COMPLEXES AS COCATALYSTS
ALUMINUM ALKYLS AND LINEAR 1-OLEFINS FROM INTERNAL OLEFINS
ALUMINUM ALKYLS USED TO CREATE MULTIPLE FRACTURES
ALUMINUM ALLOY
ALUMINUM ALLOY AND ARTICLE CAST THEREFROM
ALUMINUM ALLOY AND METHOD FOR MAKING DIE CAST PRODUCTS
ALUMINUM ALLOY AND METHOD FOR MANUFACTURING ALUMINUM-ALLOY MEMBER
ALUMINUM ALLOY AND METHOD OF MAKING
ALUMINUM ALLOY AND METHOD OF PREPARING THE SAME
ALUMINUM ALLOY AND PROCESS FOR PRODUCING THE SAME
ALUMINUM ALLOY AND SLIDE BEARING
ALUMINUM ALLOY ARTICLE AND METHOD OF USE
ALUMINUM ALLOY BACK JUNCTION SOLAR CELL AND A PROCESS FOR FABRICATION THEREOF
ALUMINUM ALLOY BEARING
ALUMINUM ALLOY BICYCLE FRAME
ALUMINUM ALLOY BRACKET FOR FIXING ELASTIC MOUNT, ASSEMBLY OF ELASTIC MOUNT AND BRACKET, AND METHOD OF PRODUCING THE BRACKET BY EXTRUSION
ALUMINUM ALLOY BRAZING MATERIAL AND BRAZING SHEET ADAPTABLE FOR HEAT EXCHANGES
ALUMINUM ALLOY BRAZING SHEET
ALUMINUM ALLOY BRAZING SHEET FOR A HEAT EXCHANGER
ALUMINUM ALLOY BRAZING SHEET FOR USE IN VACUUM BRAZING
ALUMINUM ALLOY BRAZING SHEET FOR VACUUM BRAZING EXHIBITING EXCELLENT CORROSION RESISTANCE, AND HEAT EXCHANGER USING THE BRAZING SHEET
ALUMINUM ALLOY CASTING HAVING HIGH STRENGTH AND HIGH TOUGHNESS AND PROCESS FOR PRODUCING THE SAME
ALUMINUM ALLOY CATHODE PLATE FOR ELECTROWINNING OF ZINC
ALUMINUM ALLOY CHAIN AND METHOD OF MAKING SAME
ALUMINUM ALLOY CLAD MATERIAL
ALUMINUM ALLOY CLAD MATERIAL FOR HEAT EXCHANGERS EXHIBITING EXCELLENT EROSION-CORROSION RESISTANCE
ALUMINUM ALLOY CLAD MATERIAL FOR HEAT EXCHANGERS EXHIBITING HIGH STRENGTH AND EXCELLENT CORROSION RESISTANCE
ALUMINUM ALLOY COMPOSITE MATERIAL FOR BRAZING
ALUMINUM ALLOY COMPOSITE MATERIAL WITH INTERMETALLIC COMPOUND FINELY DISPERSED IN MATRIX AMONG REINFORCING ELEMENTS
ALUMINUM ALLOY COMPOSITION
ALUMINUM ALLOY COMPOSITION AND METHOD OF MANUFACTURE
ALUMINUM ALLOY COMPOSITION AND METHODS OF MANUFACTURE
ALUMINUM ALLOY COMPOSITION, ARTICLE AND METHOD OF USE
ALUMINUM ALLOY CYLINDER BLOCK FOR AN INTERNAL COMBUSTION ENGINE
ALUMINUM ALLOY DIE CASTING METHOD
ALUMINUM ALLOY ELECTRODE FOR SEMICONDUCTOR DEVICES
ALUMINUM ALLOY EXTERIOR COATING FOR UNDERGROUND DUCTILE IRON PIPE
ALUMINUM ALLOY EXTRUDED AND COLD WORKED PRODUCTS HAVING FINE GRAIN STRUCTURE AND THEIR MANUFACTURE
ALUMINUM ALLOY EXTRUDED MATERIAL FOR AUTOMOTIVE STRUCTURAL MEMBERS
ALUMINUM ALLOY EXTRUDED SQUARE PIPE EXCELLENT IN AXIALLY COMPRESSIVE PROPERTIES FOR AUTOMOBILE FRONT SIDE MEMBER
ALUMINUM ALLOY EXTRUSION AND METHOD OF PRODUCING
ALUMINUM ALLOY EXTRUSION MATERIAL WITH EXCELLENT CHIP SEPARATION PROPERTY AND PRECISION OF CUT FACE ON CUTTING
ALUMINUM ALLOY EXTRUSIONS HAVING A SUBSTANTIALLY UNRECRYSTALLIZED STRUCTURE
ALUMINUM ALLOY FIN MATERIAL FOR HEAT EXCHANGER
ALUMINUM ALLOY FIN MATERIAL FOR HEAT-EXCHANGER
ALUMINUM ALLOY FOR A WELDED CONSTRUCTION AND WELDED JOINT USING THE SAME
ALUMINUM ALLOY FOR ARMOURED CABLE WRAP
ALUMINUM ALLOY FOR DIE-CAST PRODUCT HAVING A HIGH-TOUGHNESS
ALUMINUM ALLOY FOR FORGING, PROCESS FOR CASTING THE SAME AND PROCESS FOR HEAT TREATING THE SAME
ALUMINUM ALLOY FOR HEAT EXCHANGERS
ALUMINUM ALLOY FOR HIGH PRESSURE DIE-CASTING
ALUMINUM ALLOY FOR INTERNAL-COMBUSTION PISTON, AND ALUMINUM ALLOY PISTON
ALUMINUM ALLOY FOR MAKING NATURALLY AGED DIE CAST PRODUCTS
ALUMINUM ALLOY FOR PISTON AND METHOD FOR PRODUCING PISTON
ALUMINUM ALLOY FOR SLIDING BEARING AND ITS PRODUCTION METHOD
ALUMINUM ALLOY FOR SLIDING MATERIALS
ALUMINUM ALLOY FOR USE IN CASTINGS
ALUMINUM ALLOY HAVING IMPROVED DAMAGE TOLERANT CHARACTERISTICS
ALUMINUM ALLOY HEAT EXCHANGER RESISTIVE TO TOBACCO ODOR IMPREGNATION
ALUMINUM ALLOY IMPELLER AND MANUFACTURING METHOD OF THE SAME
ALUMINUM ALLOY MATERIAL FOR SHUTTER OF RECORDING MEDIUM CASSETTE, PROCESS FOR PRODUCING THE SAME, AND ALUMINUM ALLOY SHUTTER MADE OF THE SAME
ALUMINUM ALLOY MATERIAL HAVING A SURFACE OF EXCELLENT ZINC PHOSPHATE PROCESSABILITY
ALUMINUM ALLOY MATERIAL HAVING HIGH STRENGTH AND EXCELLENT FORMABILITY
ALUMINUM ALLOY MEMBER AND PRODUCTION METHOD THEREOF
ALUMINUM ALLOY MEMBER, WITH INSERT PROVIDED THEREIN, POSSESSING IMPROVED DAMPING CAPACITY AND PROCESS FOR PRODUCING THE SAME
ALUMINUM ALLOY OF EXCELLENT MACHINABILITY AND MANUFACTURING METHOD THEREOF
ALUMINUM ALLOY PIPING MATERIAL FOR AUTOMOTIVE PIPING EXCELLING IN CORROSION RESISTANCE AND WORKABILITY
ALUMINUM ALLOY PIPING MATERIAL HAVING AN EXCELLENT CORROSION RESISTANCE AND WORKABILITY
ALUMINUM ALLOY PISTON
ALUMINUM ALLOY PLATE EXCELLING IN FILIFORM CORROSION RESISTANCE AND METHOD OF FABRICATING SAME
ALUMINUM ALLOY PLATE FOR AUTOMOBILE AND MANUFACTURING METHOD THEREOF
ALUMINUM ALLOY PLATE FOR DISCS WITH IMPROVED PLATABILITY AND PROCESS FOR PRODUCING THE SAME
ALUMINUM ALLOY PLATE FOR PLANOGRAPHIC PRINTING PLATE
ALUMINUM ALLOY PLATE FOR SUPER PLASTIC MOLDING CAPABLE OF COLD PRE-MOLDING, AND PRODUCTION METHOD FOR THE SAME
ALUMINUM ALLOY POWDER FOR SLIDING MEMBERS AND ALUMINUM ALLOY THEREFOR
ALUMINUM ALLOY POWDERS FOR COATING MATERIALS, AND COATING MATERIALS CONTAINING THE ALLOY POWDERS
ALUMINUM ALLOY PRODUCT HAVING GOOD COMBINATIONS OF MECHANICAL AND CORROSION RESISTANCE PROPERTIES AND FORMABILITY AND PROCESS FOR PRODUCING SUCH PRODUCT
ALUMINUM ALLOY PRODUCT HAVING IMPROVED COMBINATIONS OF PROPERTIES
ALUMINUM ALLOY PRODUCTS SUITED FOR COMMERCIAL JET AIRCRAFT WING MEMBERS
ALUMINUM ALLOY PRODUCTS WITH HIGH RESISTANCE TO PITTING CORROSION
ALUMINUM ALLOY SEMI-FINISHED PRODUCT MANUFACTURING PROCESS USING RECYCLED RAW MATERIALS
ALUMINUM ALLOY SEMICONDUCTOR PACKAGES
ALUMINUM ALLOY SHEET FOR CROSS FIN AND PRODUCTION THEREOF
ALUMINUM ALLOY SHEET FOR DISCS HAVING GOOD PLATABILITY
ALUMINUM ALLOY SHEET FOR EASY-OPEN CAN ENDS HAVING EXCELLENT CORROSION RESISTANCE AND AGE SOFTENING RESISTANCE AND ITS PRODUCTION PROCESS
ALUMINUM ALLOY SHEET FOR FOOD AND BEVERAGE CONTAINERS
ALUMINUM ALLOY SHEET FOR LITHOGRAPHIC PRINTING PLATES AND METHOD FOR MANUFACTURING THE SAME
ALUMINUM ALLOY SHEET FOR MAGNETIC DISK SUBSTRATE ALUMINUM ALLOY CLAD SHEET FOR MAGNETIC DISK SUBSTRATE AND THEIR MANUFACTURING METHOD
ALUMINUM ALLOY SHEET FOR SPOT WELDING
ALUMINUM ALLOY SHEET HAVING EXCELLENT PRESS FORMABILITY AND SPOT WELDABILITY
ALUMINUM ALLOY SHEET HAVING HIGH ULTIMATE TENSILE STRENGTH AND METHODS FOR MAKING THE SAME
ALUMINUM ALLOY SHEET MATERIAL AND METHOD FOR PRODUCING THE SAME
ALUMINUM ALLOY SHEET STOCK
ALUMINUM ALLOY SHEET SUITABLE FOR HIGH-SPEED FORMING AND PROCESS FOR MANUFACTURING THE SAME
ALUMINUM ALLOY SHEET WITH EXCELLENT FORMABILITY AND METHOD FOR MANUFACTURE THEREOF
ALUMINUM ALLOY SHEET WITH IMPROVED FORMABILITY AND METHOD OF PRODUCTION
ALUMINUM ALLOY SHEETS EXCELLENT IN STRENGTH AND DEEP DRAWING FORMABILITY AND PROCESS FOR MANUFACTURING SAME
ALUMINUM ALLOY SOLDER MATERIAL, ITS MANUFACTURING METHOD, BRAZING SHEET USING THIS MATERIAL, AND METHOD OF MANUFACTURING ALUMINUM ALLOY HEAT EXCHANGER USING THIS SHEET
ALUMINUM ALLOY STRIP MANUFACTURING PROCESS FOR THE MANUFACTURE OF BRAZED HEAT EXCHANGERS
ALUMINUM ALLOY STRIP OR TUBE FOR THE MANUFACTURE OF BRAZED HEAT EXCHANGERS
ALUMINUM ALLOY STRUCTURAL PLATE EXCELLING IN STRENGTH AND CORROSION RESISTANCE AND METHOD OF MANUFACTURING SAME
ALUMINUM ALLOY SUBSTRATE FOR ELECTROLYTICALLY GRAINABLE LITHOGRAPHIC PRINTING PLATE AND PROCESS FOR PRODUCING SAME
ALUMINUM ALLOY SUBSTRATE FOR LITHOGRAPHIC PRINTING PLATE AND PROCESS OF PRODUCING SAME
ALUMINUM ALLOY SUITABLE FOR PISTONS
ALUMINUM ALLOY SUPPORT BODY FOR A PRESENSITIZED PLATE AND METHOD OF PRODUCING THE SAME
ALUMINUM ALLOY SUPPORT FOR LITHOGRAPHIC PRINTING PLATE AND PROCESS FOR PRODUCING SUBSTRATE FOR SUPPORT
ALUMINUM ALLOY SUPPORT FOR PLANOGRAPHIC PRINTING PLATE
ALUMINUM ALLOY SUPPORT FOR PLANOGRAPHIC PRINTING PLATE AND METHOD FOR PRODUCING THE SAME
ALUMINUM ALLOY THICK PLATE PRODUCT AND METHOD
ALUMINUM ALLOY THIN FILM TARGET MATERIAL AND METHOD FOR FORMING THIN FILM USING THE SAME
ALUMINUM ALLOY TUBE AND HEAT EXCHANGER, AND METHOD OF METAL-SPRAYING A FILLER ALLOY
ALUMINUM ALLOY USEFUL FOR DRIVESHAFT ASSEMBLIES AND METHOD OF MANUFACTURING EXTRUDED TUBE OF SUCH ALLOY
ALUMINUM ALLOY VALVE SPRING RETAINER AND METHOD OF MAKING SAME
ALUMINUM ALLOY WIRING LAYER AND ALUMINUM ALLOY SPUTTERING TARGET | ALUMINUM ALLOY WITH GOOD CUTTABILITY, METHOD FOR PRODUCING A FORGED ARTICLE, AND FORGED ARTICLE
ALUMINUM ALLOY WITH IMPROVED TRIBOLOGICAL CHARACTERISTICS
ALUMINUM ALLOY WITH INTERGRANULAR CORROSION RESISTANCE AND METHODS OF MAKING AND USE
ALUMINUM ALLOY, ALUMINUM ALLOY FOIL, CONTAINER AND METHOD OF PREPARING ALUMINUM ALLOY FOIL
ALUMINUM ALLOY/SILICON CHROMIUM SANDWICH SCHOTTKY DIODE
ALUMINUM ALLOY/SILICON-CHROMIUM SANDWICH SCHOTTKY DIODE
ALUMINUM ALLOYS AND METHOD FOR THEIR PRODUCTION
ALUMINUM ALLOYS AND METHODS OF MAKING THE SAME
ALUMINUM ALLOYS AND PROCESS FOR MAKING ALUMINUM ALLOY SHEET
ALUMINUM ALLOYS CONTAINING BERYLLIUM AND INVESTMENT CASTING OF SUCH ALLOYS
ALUMINUM ALLOYS CONTAINING SCANDIUM WITH ZIRCONIUM ADDITIONS
ALUMINUM ALLOYS CONTAINING VERY FINELY DISPERSED BISMUTH, CADMIUM, INDIUM AND/OR LEAD AND A PROCESS FOR OBTAINING THEM
ALUMINUM ALLOYS FOR ELECTRONIC COMPONENTS
ALUMINUM ALLOYS FOR FORMING COLORED ANODIC OXIDE FILMS THEREON AND METHOD FOR PRODUCING A SHEET MATERIAL OF THE ALLOY
ALUMINUM ALLOYS HAVING IMPROVED CAST SURFACE QUALITY
ALUMINUM ALLOYS SUITABLE FOR LITHOGRAPHIC PRINTING PLATES
ALUMINUM ALLOYS WITH OPTIMUM COMBINATIONS OF FORMABILITY, CORROSION RESISTANCE, AND HOT WORKABILITY, AND METHODS OF USE
ALUMINUM ALLOYS, SUBSTRATES COATED WITH THESE ALLOYS AND THEIR APPLICATIONS
ALUMINUM AND ALUMINUM ALLOY RADIATOR FOR SEMICONDUCTOR DEVICE AND PROCESS FOR PRODUCING THE SAME
ALUMINUM AND COPPER BIMETALLIC BOND PAD SCHEME FOR COPPER DAMASCENE INTERCONNECTS
ALUMINUM AND SILICON DIFFUSION COATING
ALUMINUM AND SULFUR ELECTROCHEMICAL BATTERIES AND CELLS
ALUMINUM AUTOMOTIVE DOOR ASSEMBLY
ALUMINUM AUTOMOTIVE FRAME MEMBERS
ALUMINUM AXLE JOURNAL OR WHEEL MOUNT WITH AN INSERTED STEEL PIVOT AND A METHOD FOR THE PRODUCTION THEREOF
ALUMINUM BASE ALLOY
ALUMINUM BASE ALLOY AND METHOD FOR PREPARING SAME
ALUMINUM BASE ALLOY BEARING HAVING SUPERIOR FATIGUE RESISTANCE
ALUMINUM BASE ALLOY BEARING HAVING SUPERIOR LOAD-RESISTANCE AND METHOD OF PRODUCING THE SAME
ALUMINUM BASE ALLOY CONTAINING BORON AND MANUFACTURING METHOD THEREOF
ALUMINUM BASE BEARING ALLOY AND A BEARING ELEMENT COMPRISING A RUNNING LAYER FORMED BY THE ALLOY
ALUMINUM BASE MEMBER FOR SEMICONDUCTOR DEVICE CONTAINING A NITROGEN RICH SURFACE AND METHOD FOR PRODUCING THE SAME
ALUMINUM BASE SINTERED MATERIAL
ALUMINUM BASEBALL OR SOFTBALL BAT WARMER
ALUMINUM BASED ALLOY BEARING HAVING STRENGTHENED INTERMEDIATE BONDING LAYER
ALUMINUM BASED ALLOY BRIDGE STRUCTURE AND METHOD OF FORMING SAME
ALUMINUM BASED ARTICLE HAVING AN INSERT WITH VITREOUS MATERIAL HERMETICALLY SEALED THERETO
ALUMINUM BASED COLLARED HEADER PLATE FOR A HEAT EXCHANGER, ESPECIALLY FOR A MOTOR VEHICLE
ALUMINUM BASED LEWIS ACID COCATALYSTS FOR OLEFIN POLYMERIZATION
ALUMINUM BASED MG-SI-CU-MN ALLOY HAVING HIGH STRENGTH AND SUPERIOR ELONGATION
ALUMINUM BASED PHOSPHATE FINAL RINSE
ALUMINUM BAT WITH IMPROVED CORE INSERT
ALUMINUM BAT WITH INTERNAL GROOVES
ALUMINUM BATTERY CASING WITH CORROSION PREVENTING FILM
ALUMINUM BATTERY WITH ALUMINUM-CONTAINING NEGATIVE ELECTRODE
ALUMINUM BEARER FOR A BEARER JOINT IN A VEHICLE BODY WORK AND METHOD OF REPLACEMENT
ALUMINUM BEARING ALLOY
ALUMINUM BEVERAGE CAN
ALUMINUM BEVERAGE CAN CRUSHER
ALUMINUM BIS(HYDROXYMETHYL)PHOSPHINATE, AND A PROCESS FOR THE PREPARATION OF BIS(HYDROXYMETHYL)PHOSPHINATES
ALUMINUM BORATE CERAMIC MATRIX COMPOSITE
ALUMINUM BORATE CERAMICS AND PROCESS FOR PRODUCING SAME
ALUMINUM BORATE DEVITRIFICATION INHIBITOR IN LOW DIELECTRIC BOROSILICATE GLASS
ALUMINUM BORE ENGINE HAVING WEAR AND SCUFF-RESISTANT ALUMINUM PISTON
ALUMINUM BRAZING ALLOY
ALUMINUM BRAZING ALLOY FOR COLD BRAZING AND METHOD FOR BRAZING LOW-MELTING ALUMINUM MATERIAL
ALUMINUM BRAZING METHOD AND FURNACE THEREFOR
ALUMINUM BRAZING METHOD WHICH AVOIDS WASTE WATER
ALUMINUM BRAZING PASTE
ALUMINUM BRAZING SHEET
ALUMINUM BRIDGED CLAYS
ALUMINUM BUMP, REWORKABLE BUMP, AND TITANIUM NITRIDE STRUCTURE FOR TAB BONDING
ALUMINUM CAN COMPACTING MECHANISM
ALUMINUM CAN COMPACTOR FED WITH BULK CANS
ALUMINUM CAN CRUSHING APPARATUS
ALUMINUM CAN HANDLING TONGS
ALUMINUM CAN HAT
ALUMINUM CAN RECYCLING
ALUMINUM CAN RECYCLING AND COUPON DISPENSER APPARATUS
ALUMINUM CAN RECYCLING APPLIANCE AND METHOD
ALUMINUM CAN RECYCLING CENTER
ALUMINUM CAN TRUCK-MOUNTED ATTENUATOR
ALUMINUM CASTING ALLOY
ALUMINUM CASTING ALLOY FOR HIGH STRENGTH/HIGH TEMPERATURE APPLICATIONS
ALUMINUM CHARGE AIR COOLER AND METHOD OF MAKING THE SAME
ALUMINUM CHASSIS HAVING HEAT INSULATING FOAM FILLED IN HOLLOW, ITS MANUFACTURING METHOD AND APPARATUS
ALUMINUM CHLORHYDRATE AS A TREATMENT FOR ACNE AND ROSACEA
ALUMINUM CITRATE PREPARATIONS AND METHODS
ALUMINUM CLAD ZINC BIMETALLIC COIN PLANCHET
ALUMINUM CLOSURE PANEL AND HEMMING METHOD
ALUMINUM COIL ANNEALING TRAY SUPPORT PAD
ALUMINUM COMPLEX DERIVATIVES FOR CHEMICAL VACUUM EVAPORATION AND THE METHOD OF PRODUCING THE SAME
ALUMINUM COMPLEX OF POLYSULFONATED SUCROSE
ALUMINUM COMPLEXES FOR OLEFIN POLYMERIZATION
ALUMINUM COMPONENTS COATED WITH ZINC-ANTIMONY ALLOY FOR MANUFACTURING ASSEMBLIES BY CAB BRAZING
ALUMINUM COMPOSITE FOR GUN BARRELS
ALUMINUM COMPOSITE MATERIAL HAVING NEUTRON-ABSORBING ABILITY
ALUMINUM COMPOSITE MATERIAL OF LOW-THERMAL EXPANSION AND HIGH-THERMAL CONDUCTIVITY AND METHOD OF PRODUCING SAME
ALUMINUM COMPOSITE MATERIAL, ALUMINUM COMPOSITE POWDER AND ITS MANUFACTURING METHOD
ALUMINUM COMPOUND-CONTAINING SOLID CATALYST COMPONENT, CATALYST FOR OLEFIN POLYMERIZATION AND METHOD FOR PRODUCING OLEFIN POLYMER
ALUMINUM COMPOUNDS AND PROCESS OF MAKING THE SAME
ALUMINUM COMPOUNDS AND USE THEREOF
ALUMINUM COMPOUNDS FOR PRODUCING VINYLIC POLYMERS
ALUMINUM CONCRETE FORMING SYSTEM
ALUMINUM CONNECTOR HUB FOR A STEEL TUBE
ALUMINUM CONTACT STRUCTURE FOR INTEGRATED CIRCUITS
ALUMINUM CONTAINING IRON-BASE ALLOYS USEFUL AS ELECTRICAL RESISTANCE HEATING ELEMENTS
ALUMINUM CORE CYLINDER HEAD GASKET FOR MARINE ENGINES
ALUMINUM COVERED POLYSTYRENE ROOF TILE AND METHOD OF APPLICATION TO A ROOF
ALUMINUM CURRENT COLLECTOR FOR AN ELECTROCHEMICAL CELL HAVING A SOLID CATHODE
ALUMINUM DEPOSITED FILM AND PROCESS FOR PRODUCING IT
ALUMINUM DEPOSITION SHIELD
ALUMINUM DESMUT COMPOSITION AND PROCESS
ALUMINUM DIE CASTING
ALUMINUM DIE-CAST MATERIAL FOR BOATS
ALUMINUM DISPOSABLE SPACER TO REDUCE MASK COUNT IN CMOS TRANSISTOR FORMATION
ALUMINUM DRIVE SHAFT
ALUMINUM DRIVESHAFT HAVING REDUCED DIAMETER END PORTION
ALUMINUM DROSS RECOVERY PROCESS
ALUMINUM ELECTRODE FOIL FOR ELECTROLYTIC CAPACITOR AND ELECTROLYTIC CAPACITOR USING THE FOIL
ALUMINUM ELECTROLYSIS USING SOLID CRYOLITE/ALUMINA CRUST AS ANODE
ALUMINUM ELECTROLYTE CAPACITOR WITH REDUCED INDUCTIVITY
ALUMINUM ELECTROLYTIC CAPACITOR
ALUMINUM ELECTROLYTIC CAPACITOR AND ITS MANUFACTURING METHOD
ALUMINUM ELECTROLYTIC CAPACITOR AND METHOD FOR PRODUCING THE SAME
ALUMINUM ELECTROLYTIC CAPACITOR AND METHOD OF MANUFACTURING THE SAME
ALUMINUM ELECTROLYTIC CAPACITOR AND PROCESS OF PRODUCING THE SAME
ALUMINUM ELECTROLYTIC CAPACITOR ASSEMBLY
ALUMINUM ELECTROLYTIC CAPACITOR DEVICE
ALUMINUM ELECTROLYTIC CAPACITOR FOR IMPLANTABLE MEDICAL DEVICE
ALUMINUM ELECTROLYTIC CAPACITOR WITH CONDUCTIVE FEED-THROUGH FOR IMPLANTABLE MEDICAL DEVICE
ALUMINUM ELECTROLYTIC CELL METHOD WITH APPLICATION OF REFRACTORY PROTECTIVE COATINGS ON CELLO COMPONENTS
ALUMINUM ELECTROPLATING APPARATUS
ALUMINUM ELECTROWINNING CELLS WITH OXYGEN-EVOLVING ANODES
ALUMINUM ETCHING
ALUMINUM EXTRUDED DOOR BEAM MATERIAL
ALUMINUM EXTRUDING MACHINE
ALUMINUM EXTRUSION WITH MULTIPLE THERMAL BRAKE AND METHOD OF MAKING SAME
ALUMINUM FILM FOR SEMICONDUCTIVE DEVICES
ALUMINUM FISHING BOAT
ALUMINUM FLAKE PIGMENT TREATED WITH METAL SALTS AND COATINGS CONTAINING THE SAME
ALUMINUM FLAKE PIGMENT TREATED WITH TIME RELEASE CORROSION INHIBITING COMPOUNDS AND COATINGS CONTAINING THE SAME
ALUMINUM FLUORIDE CATALYST COMPOSITIONS AND USE THEREOF IN A CHLOROFLUORINATION PROCESS FOR PREPARING 1,1-DICHLORO-1,2,2,2-TETRAFLUOROETHANE
ALUMINUM FLUORIDE FLUX SYNTHESIS METHOD FOR PRODUCING CERIUM DOPED YAG
ALUMINUM FOAM CORE VACUUM IMAGING DRUM AND METHOD OF DRUM FABRICATION
ALUMINUM FOIL AS ELECTROLYTIC CONDENSER ELECTRODES
ALUMINUM FOIL COMPRESSION MOLD AND METHOD OF MOLDING FOOD
ALUMINUM FOIL FOR ELECTROLYTIC CAPACITORS
ALUMINUM FOIL PRODUCT AND MANUFACTURING METHOD
ALUMINUM FOIL SAFETY FIXTURE
ALUMINUM FRAME HANGER FOR AXLE/SUSPENSION SYSTEMS
ALUMINUM FRAME MEMBER
ALUMINUM FRAME WINDOW WITH VENTILATING MEANS
ALUMINUM FRAMED VINYL CLOSURE FOR GOLF CARTS
ALUMINUM FRAMED WINDOW MOLDING
ALUMINUM FRAMING
ALUMINUM FRAMING COMPONENTS AND COMPONENT SYSTEMS FOR POOL, PATIO AND GLASS ENCLOSURES AND THE LIKE
ALUMINUM FULL FACE VEHICLE WHEEL
ALUMINUM GALLIUM NITRIDE BASED HETEROJUNCTION BIPOLAR TRANSISTOR
ALUMINUM GALLIUM NITRIDE HETEROJUNCTION BIPOLAR TRANSISTOR
ALUMINUM GALLIUM NITRIDE LASER
ALUMINUM GALLIUM NITRIDE/GALLIUM NITRIDE HIGH ELECTRON MOBILITY TRANSISTORS HAVING A GATE CONTACT ON A GALLIUM NITRIDE BASED CAP SEGMENT
ALUMINUM GATES INCLUDING ION IMPLANTED COMPOSITE LAYERS
ALUMINUM HARDMASK FOR DIELECTRIC ETCH
ALUMINUM HEAD DRUM WITH A PROTECTIVE LAYER WHICH SMOOTHLY AND CONTINUOUSLY VARIES IN HARDNESS FOR USE IN A VIDEOCASSETTE RECORDER
ALUMINUM HEADER CONSTRUCTION
ALUMINUM HEAT EXCHANGER
ALUMINUM HEAT EXCHANGER BRAZE FURNACE
ALUMINUM HEAT EXCHANGER BRAZING METHOD AND APPARATUS
ALUMINUM HOLE FILLING METHOD USING IONIZED METAL ADHESION LAYER
ALUMINUM HULL BOAT WITH EXTRUDED RUNNING SURFACE
ALUMINUM HYDROXIDE PRODUCTION
ALUMINUM HYDROXIDE, AND TIRE TREAD RUBBER COMPOSITION AND PNEUMATIC TIRE EMPLOYING THE ALUMINUM HYDROXIDE
ALUMINUM HYDROXIDE, METHOD FOR PRODUCING THE SAME, AND METHOD OF USE OF THE SAME
ALUMINUM HYDROXIDE, PROCESS FOR PREPARATION THEREOF AND COMPOSITION
ALUMINUM IMPLANTATION METHOD
ALUMINUM INDIUM GALLIUM NITRIDE-BASED LED HAVING THICK EPITAXIAL LAYER FOR IMPROVED LIGHT EXTRACTION
ALUMINUM INTERCONNECTION
ALUMINUM LAMINATE
ALUMINUM LEADFRAMES WITH TWO NICKEL LAYERS
ALUMINUM LIKE METAL WIRING FOR SEMICONDUCTOR DEVICES
ALUMINUM LOW TEMPERATURE SMELTING CELL METAL COLLECTION
ALUMINUM MAGNESIUM ALLOY PRODUCT CONTAINING DISPERSOIDS
ALUMINUM MAGNESIUM HYDROXY COMPOUNDS
ALUMINUM MAGNESIUM HYDROXY FATTY ACID COMPOUNDS AND THERMOSTABLE LIPOGELS INCLUDING SAME
ALUMINUM MASTER ALLOYS CONTAINING STRONTIUM, BORON, AND SILICON FOR GRAIN REFINING AND MODIFYING ALUMINUM ALLOYS
ALUMINUM MATRIX BEARING METAL ALLOY
ALUMINUM MATRIX COMPOSITE AND METHOD FOR MAKING SAME
ALUMINUM MATRIX COMPOSITE POWDER
ALUMINUM MATRIX COMPOSITE WIRES, CABLES, AND METHOD
ALUMINUM MELTING WITH REDUCED DROSS FORMATION
ALUMINUM MEMBER PROVIDED WITH WEATHER-RESISTANT COAT
ALUMINUM MESH WITH HOLLOW RIBS AND THE RELATED WORKPIECE EXTRUDING DIE
ALUMINUM MESH WITH INTERLACED HOLLOW AND SOLID RIBS
ALUMINUM METAL COMPOSITION FLAKE HAVING REDUCED COATING
ALUMINUM METAL MATRIX COMPOSITE MATERIALS REINFORCED BY INTERMETALLIC COMPOUNDS AND ALUMINA WHISKERS
ALUMINUM METAL MATRIX COMPOSITES
ALUMINUM METALLIZATION BY A BARRIER METAL PROCESS
ALUMINUM METALLIZATION DOPED WITH IRON AND COPPER TO PREVENT ELECTROMIGRATION
ALUMINUM METALLIZATION FOR SIGE DEVICES
ALUMINUM METALLIZATION METHOD
ALUMINUM METALLIZATION METHOD AND PRODUCT
ALUMINUM NITRIDE BASED COMPOSITE BODY ELECTRONIC FUNCTIONAL MATERIAL, ELECTROSTATIC CHUCK AND METHOD OF PRODUCING ALUMINUM NITRIDE BASED COMPOSITE BODY
ALUMINUM NITRIDE BODY AND METHOD FOR FORMING SAID BODY UTILIZING A VITREOUS SINTERING ADDITIVE
ALUMINUM NITRIDE BODY HAVING GRADED METALLURGY
ALUMINUM NITRIDE BODY UTILIZING A VITREOUS SINTERING ADDITIVE
ALUMINUM NITRIDE CERAMICS AND METHOD FOR PREPARING THE SAME
ALUMINUM NITRIDE CIRCUIT BOARD
ALUMINUM NITRIDE CIRCUIT BOARD AND METHOD OF PRODUCING SAME
ALUMINUM NITRIDE COMPOSITION
ALUMINUM NITRIDE DEPOSITION USING AN ALN/AL SPUTTER CYCLE TECHNIQUE
ALUMINUM NITRIDE FILM SUBSTRATE AND PROCESS FOR PRODUCING SAME
ALUMINUM NITRIDE FLAKES AND SPHERES
ALUMINUM NITRIDE FROM INORGANIC POLYMERS
ALUMINUM NITRIDE GRANULES AND PROCESS FOR THE PREPARATION THEREOF
ALUMINUM NITRIDE HEATER
ALUMINUM NITRIDE JUNCTION STRUCTURE
ALUMINUM NITRIDE MULTI-CHIP MODULE
ALUMINUM NITRIDE POWDER
ALUMINUM NITRIDE POWDER AND THERMALLY CONDUCTIVE GREASE COMPOSITION USING THE SAME
ALUMINUM NITRIDE POWDER CAPABLE OF FORMING COLORED SINTERED BODY AND PROCESS FOR PREPARING SAME
ALUMINUM NITRIDE POWDER HAVING A REDUCED AMMONIA ODOR AND A METHOD FOR PREPARING THE SAME
ALUMINUM NITRIDE POWDER HAVING SURFACE LAYER CONTAINING OXYNITRIDE
ALUMINUM NITRIDE REFRACTORY MATERIALS AND METHODS FOR MAKING THE SAME
ALUMINUM NITRIDE REFRACTORY MATERIALS AND METHODS FOR USING THE SAME
ALUMINUM NITRIDE SINTERED BODIES
ALUMINUM NITRIDE SINTERED BODIES AND SEMICONDUCTOR-PRODUCING MEMBERS INCLUDING SAME
ALUMINUM NITRIDE SINTERED BODY
ALUMINUM NITRIDE SINTERED BODY AND ITS PRODUCTION METHOD
ALUMINUM NITRIDE SINTERED BODY AND MANUFACTURING METHOD THEREOF
ALUMINUM NITRIDE SINTERED BODY AND METHOD FOR MANUFACTURING THE SAME
ALUMINUM NITRIDE SINTERED BODY AND METHOD OF MANUFACTURING THE SAME
ALUMINUM NITRIDE SINTERED BODY AND METHOD OF PREPARING THE SAME
ALUMINUM NITRIDE SINTERED BODY AND METHOD OF PRODUCING THE SAME
ALUMINUM NITRIDE SINTERED BODY AND PROCESS FOR PREPARATION THEREOF
ALUMINUM NITRIDE SINTERED BODY AND PROCESS FOR PRODUCING THE SAME
ALUMINUM NITRIDE SINTERED BODY AND PRODUCTION THEREOF
ALUMINUM NITRIDE SINTERED BODY HAVING A METALLIZED COATING LAYER ON ITS SURFACE
ALUMINUM NITRIDE SINTERED BODY WITH HIGH THERMAL CONDUCTIVITY AND ITS PREPARATION
ALUMINUM NITRIDE SINTERED BODY, ELECTRONIC FUNCTIONAL MATERIAL, AND ELECTROSTATIC CHUCK
ALUMINUM NITRIDE SINTERED BODY, METAL EMBEDDED ARTICLE, ELECTRONIC FUNCTIONAL MATERIAL AND ELECTROSTATIC CHUCK
ALUMINUM NITRIDE SINTERED BODY, METAL INCLUDING MEMBER, ELECTROSTATIC CHUCK, METHOD OF PRODUCING ALUMINUM NITRIDE SINTERED BODY, AND METHOD OF PRODUCING METAL INCLUDING MEMBER
ALUMINUM NITRIDE SINTERED BODY, METHOD FOR MANUFACTURING THE SAME, AND CERAMIC CIRCUIT BOARD
ALUMINUM NITRIDE SINTERED BODY, METHOD OF PRODUCING THEREOF, ELECTROSTATIC CHUCK, SUSCEPTOR, DUMMY WAFER, CLAMP RING AND PARTICLE CATCHER USING THE SAME
ALUMINUM NITRIDE SINTERED PRODUCT
ALUMINUM NITRIDE SUBSTRATE AND METHOD FOR PRODUCING SAME
ALUMINUM NITRIDE SUBSTRATE AND METHOD OF PRODUCING THE SAME
ALUMINUM NITRIDE SUBSTRATE AND PROCESS FOR PREPARATION THEREOF
ALUMINUM NITRIDE SUBSTRATE AND THIN FILM SUBSTRATE THEREWITH, AND MANUFACTURING METHOD THEREOF
ALUMINUM NITRIDE THIN FILM FORMATION ON INTEGRATED CIRCUITS
ALUMINUM NITRIDE WIRING SUBSTRATE
ALUMINUM NITRIDE WIRING SUBSTRATE AND METHOD FOR PRODUCTION THEREOF
ALUMINUM NITRIDE, ALUMINUM NITRIDE CONTAINING SOLID SOLUTIONS AND ALUMINUM NITRIDE COMPOSITES PREPARED BY COMBUSTION SYNTHESIS
ALUMINUM NITRIDE, ALUMINUM NITRIDE CONTAINING SOLID SOLUTIONS AND ALUMINUM NITRIDE COMPOSITES PREPARED BY COMBUSTION SYNTHESIS AND SINTERED BODIES PREPARED THEREFROM
ALUMINUM NITRIDE/ALUMINUM BASE COMPOSITE MATERIAL AND METHOD OF PRODUCING THE SAME
ALUMINUM NITRIDE-BASED SINTERED BODIES, CORROSION-RESISTANT MEMBERS, METAL-BURIED ARTICLES AND SEMICONDUCTOR-HOLDING APPARATUSES
ALUMINUM NITRIDE-BASED SINTERED BODY AND PROCESS FOR THE PRODUCTION THEREOF
ALUMINUM NITRIDE-COATED SILICON CARBIDE FIBER
ALUMINUM NITRIDE-COMPATIBLE THICK-FILM BINDER GLASS AND THICK-FILM PASTE COMPOSITION | ALUMINUM NON-AQUEOUS ELECTROLYTE SECONDARY CELL
ALUMINUM OR ALUMINUM ALLOY EXTRUDING DIE
ALUMINUM OR ALUMINUM ALLOY-BASED LITHIUM SECONDARY BATTERY
ALUMINUM ORGANIC ELECTROLYTES AND METHOD FOR ELECTROLYTIC COATING WITH ALUMINUM OR ALUMINUM-MAGNESIUM-ALLOYS
ALUMINUM OXIDE BASED SINTERED BODY
ALUMINUM OXIDE BASED THICK LAYERS PRODUCED BY PLASMA JET SPRAYING
ALUMINUM OXIDE CATALYST SUPPORTS FROM ALUMINA SOLS
ALUMINUM OXIDE COATED CUTTING TOOL AND METHOD OF MANUFACTURING THEREOF
ALUMINUM OXIDE COATED TOOL
ALUMINUM OXIDE LOW PRESSURE CHEMICAL VAPOR DEPOSITION (LPCVD) SYSTEM-FOURIER TRANSFORM INFRARED (FTIR) SOURCE CHEMICAL CONTROL
ALUMINUM OXIDE LPCVD SYSTEM
ALUMINUM OXIDE MASSES WITH VERY NARROW PORE RADIUS DISTRIBUTION
ALUMINUM OXIDE-BASED SINTERED OBJECT AND PROCESS FOR PRODUCING THE SAME
ALUMINUM OXIDE-COATED ARTICLE
ALUMINUM OXIDE-COATED TOOL MEMBER
ALUMINUM PERMANGANATE BATTERY
ALUMINUM PHOSPHATE BONDED FIBER REINFORCED COMPOSITE MATERIAL CONTAINING METAL COATED FIBERS
ALUMINUM PHOSPHATE COMPOSITION WITH HIGH PORE VOLUME AND LARGE PORE DIAMETER, PROCESS FOR ITS PRODUCTION AND USE THEREOF
ALUMINUM PHOSPHATE/SILICON DIOXIDE-BASED SEALING MATERIAL
ALUMINUM PHOSPHATES AND BINDER COMPOSITIONS/CERAMIC MATERIALS COMPRISED THEREOF
ALUMINUM PHTHALOCYANINE REACTIVE DYES
ALUMINUM PIGMENT AND PROCESS FOR PRODUCTION THEREOF
ALUMINUM PIGMENT, PROCESS FOR ITS PRODUCTION AND RESIN COMPOSITIONS CONTAINING THE SAME
ALUMINUM PIGMENTS
ALUMINUM PIPE FOR USE IN FORMING BULGED PORTIONS THEREON AND PROCESS FOR PRODUCING SAME
ALUMINUM PIPE PRODUCTION PROCESS, ELECTROPHOTOGRAPHIC PHOTOSENSITIVE MEMBER PRODUCED BY THE PRODUCTION PROCESS, AND ELECTROPHOTOGRAPHIC APPARATUS HAVING THE ELECTROPHOTOGRAPHIC PHOTOSENSITIVE MEMBER
ALUMINUM PLANOGRAPHIC PRINTING PLATE WITH CONVEXLY CURVED CORNER
ALUMINUM PLATE EXCELLENT IN FORMABILITY
ALUMINUM PLATE FOR AUTOMOBILE AND METHOD FOR PRODUCING THE SAME
ALUMINUM PLATE OIL COOLER
ALUMINUM PLATES FOR AUTOMOBILE BODY PANELS AND METHOD OF PRETREATMENT FOR PAINTING THEREOF
ALUMINUM PLUG PROCESS
ALUMINUM POWDER PREPARED FROM SCRAP ALUMINUM AND MULTI-LAYER, POROUS SOUND ABSORBING MATERIAL PREPARED THEREFROM WITH A SHELL CONFIGURATION OF A CONCH FOR EFFECTIVELY ABSORBING NOISE
ALUMINUM PRINTING PLATES AND METHOD OF MAKING
ALUMINUM PRODUCT HAVING METAL DIFFUSION LAYER, PROCESS FOR PRODUCING THE SAME, AND PASTE FOR METAL DIFFUSION TREATMENT
ALUMINUM PRODUCTION CELL AND CATHODE
ALUMINUM PRODUCTION UTILIZING POSITIVELY CHARGED ALUMINA
ALUMINUM PRODUCTS CONTAINING SUPERSATURATED LEVELS OF DISPERSOIDS
ALUMINUM PROMOTED HYDROGENATION OF ALKYLATION SLUDGE FOR ALUMINUM CHLORIDE RECOVERY
ALUMINUM PROPELLER SHAFT WITH CONSTANT VELOCITY JOINT
ALUMINUM RAILING APPARATUS
ALUMINUM RECEPTACLE WITH THREADED OUTSERT
ALUMINUM REDUCTION CELL CARBON ANODE POWER CONNECTOR
ALUMINUM REFLECTING MIRROR AND METHOD OF MAKING THE SAME
ALUMINUM REFLECTOR WITH A COMPOSITE REFLECTIVITY-ENHANCING SURFACE LAYER
ALUMINUM REFLECTOR WITH COMPOSITE REFLECTIVITY-ENHANCING SURFACE LAYER
ALUMINUM REMELTING FURNACE, IN PARTICULAR FOR MELTING ALUMINUM SCRAP TO BE RECYCLED
ALUMINUM RESISTANT REFRACTORY AND METHOD
ALUMINUM RIGID CONTAINER SHEET CLEANER AND CLEANING METHOD
ALUMINUM RISER APPARATUS, SYSTEM AND METHOD
ALUMINUM SALT-AMINE COMPLEX UV INHIBITOR FOR WOOD
ALUMINUM SALTS IN THE TREATMENT OF BONE DISEASE
ALUMINUM SALTS OF PHOSPHINIC ACIDS
ALUMINUM SCAFFOLD SYSTEM
ALUMINUM SCANDIUM ALLOY INTERCONNECTION
ALUMINUM SCRAP CLEANING AND DECARBONIZATION
ALUMINUM SCRAP MELTING PROCESS AND APPARATUS
ALUMINUM SCUBA TANK BUOYANCY COMPENSATION SYSTEM
ALUMINUM SHADOW BOX FENCE
ALUMINUM SHEET COATED WITH A LUBRICANT COMPRISING DIOCTYL SEBACATE AND PETROLATUM
ALUMINUM SHEET PRODUCT AND METHOD OF WELDING STRUCTURAL COMPONENTS
ALUMINUM SHEET PRODUCTS HAVING IMPROVED FATIGUE CRACK GROWTH RESISTANCE AND METHODS OF MAKING SAME
ALUMINUM SHEETS BONDED WITH CADMIUM
ALUMINUM SIDE RAIL BOAT TRAILER
ALUMINUM SILICATE SUSPENSION
ALUMINUM SKATEBOARD
ALUMINUM SLIDING BEARING ALLOY
ALUMINUM SMELTING POT-CELL
ALUMINUM SOAP THICKENED STEEL MILL GREASE
ALUMINUM SPIKING INSPECTION METHOD
ALUMINUM STABILIZED SUPERCONDUCTOR SUPPORTED BY ALUMINUM ALLOY SHEATH
ALUMINUM STABILIZED SUPERCONDUCTOR WITH CU AND MG
ALUMINUM STRETCHER FRAME SYSTEM
ALUMINUM STUDS FOR SNOWMOBILE TRACK
ALUMINUM SUBSTRATE FOR LITHOGRAPHIC PRINTING PLATE AND PROCESS FOR PRODUCING THE SAME
ALUMINUM SUBSTRATE THICK FILM HEATER
ALUMINUM SUPPORT FOR LITHOGRAPHIC PRINTING PLATE
ALUMINUM SURFACE HAVING CHEMICAL CONVERSION COATING AND METHOD OF FORMING THE COATING
ALUMINUM SURFACE TREATMENT
ALUMINUM SURFACE TREATMENT AGENT, TREATMENT METHOD, AND TREATED ALUMINUM
ALUMINUM SURFACE WITH INTERFERENCE COLORS
ALUMINUM SURFACES
ALUMINUM SURFACES FOR TECHNICAL LIGHTING PURPOSES
ALUMINUM TARGET FOR MAGNETRON SPUTTERING AND METHOD OF MAKING SAME
ALUMINUM TENNIS RACKET
ALUMINUM THROTTLE BODY CARTRIDGE WITH ENGINE CONTROL MODULE HEAT SINK
ALUMINUM THRUST WASHER
ALUMINUM TITANATE CERAMIC AND PROCESS FOR PRODUCING THE SAME
ALUMINUM TRIFLUORIDE CATALYST FOR PRODUCTION OF DIARYL CARBONATES
ALUMINUM TRIHYDRATE CRYSTALS AND IMPROVED METHOD FOR THE PRODUCTION THEREOF
ALUMINUM TRIHYDROXIDE PHASE
ALUMINUM WELDING PROCESS AND COMPOSITION FOR USE IN SAME
ALUMINUM WELDING PROCESS AND MIXTURE OF REACTANTS FOR USE IN SUCH PROCESS
ALUMINUM WELDMENT AND METHOD OF WELDING ALUMINUM WORKPIECES
ALUMINUM WHEEL
ALUMINUM WHEEL CARRIER AND SPINDLE ASSEMBLY
ALUMINUM X-RAY TRANSMISSIVE WINDOW FOR AN X-RAY TUBE VACUUM VESSEL
ALUMINUM/COPPER CLAD INTERCONNECT LAYER FOR VLSI APPLICATIONS
ALUMINUM/PLASTIC COMBINATION ACCORDION STORM SHUTTER BLADE
ALUMINUM/STEEL TRANSITION JOINT
ALUMINUM-ALLOY HEAT EXCHANGER
ALUMINUM-ALLOY POWDER, SINTERED ALUMINUM-ALLOY, AND METHOD FOR PRODUCING THE SINTERED ALUMINUM-ALLOY
ALUMINUM-BASE COMPOSITE ALLOY
ALUMINUM-BASE COMPOSITE BEARING MATERIAL AND METHOD OF PRODUCING THE SAME
ALUMINUM-BASED ALLOY AND METHOD FOR SUBJECTING IT TO HEAT TREATMENT
ALUMINUM-BASED ALLOY AND PROCEDURE FOR ITS HEAT TREATMENT
ALUMINUM-BASED ALLOY CAST PRODUCT AND PROCESS FOR PRODUCING THE SAME
ALUMINUM-BASED ALLOY WITH HIGH STRENGTH AND HEAT RESISTANCE CONTAINING QUASICRYSTALS
ALUMINUM-BASED BEARING ALLOY WITH EXCELLENT FATIGUE RESISTANCE AND ANTI-SEIZURE PROPERTY
ALUMINUM-BASED COMPOSITE AND CONTAINERS PRODUCED THEREFROM
ALUMINUM-BASED INTERMETALLIC COMPOUND WITH HIGH TOUGHNESS AND HIGH WEAR RESISTANCE
ALUMINUM-BASED LEWIS ACID COCATALYSTS FOR OLEFIN POLYMERIZATION
ALUMINUM-BASED MATERIAL AND A METHOD FOR MANUFACTURING PRODUCTS FROM ALUMINUM-BASED MATERIAL
ALUMINUM-BASED METAL LINK FOR VEHICLES AND A METHOD FOR PRODUCING SAME
ALUMINUM-BASED METALLIZATION EXHIBITING REDUCED ELECTROMIGRATION AND METHOD THEREFOR
ALUMINUM-BASED POLYMER MATERIAL AND USE OF THIS MATERIAL IN A PHOTOGRAPHIC PRODUCT
ALUMINUM-BASED SOLDER MATERIAL
ALUMINUM-BERYLLIUM ACTUATOR ARMSET
ALUMINUM-BERYLLIUM ALLOYS FOR AIR BRIDGES
ALUMINUM-BERYLLIUM ALLOYS HAVING HIGH STIFFNESS AND LOW THERMAL EXPANSION FOR MEMORY DEVICES
ALUMINUM-BERYLLIUM-SILICON BASED ALLOY
ALUMINUM-BISMUTH BEARING ALLOY AND METHODS FOR ITS CONTINUOUS CASTING
ALUMINUM-BORON-CARBON ABRASIVE ARTICLE AND METHOD TO FORM SAID ARTICLE
ALUMINUM-CARBON COMPOSITE ELECTRODE
ALUMINUM-CHROMIUM ALLOY, METHOD FOR ITS PRODUCTION AND ITS APPLICATIONS
ALUMINUM-COATED PLASTIC MEMBER
ALUMINUM-COMPRISING TARGET/BACKING PLATE STRUCTURES
ALUMINUM-CONTAINING FILMS DERIVED FROM USING HYDROGEN AND OXYGEN GAS IN SPUTTER DEPOSITION
ALUMINUM-CONTAINING MATERIAL AND ATOMIC LAYER DEPOSITION METHODS
ALUMINUM-CONTAINING MEMBER AND A METHOD FOR PRODUCING SUCH AN ALUMINUM-CONTAINING MEMBER
ALUMINUM-CONTAINING METAL COMPOSITE MATERIAL AND PROCESS FOR PRODUCING SAME
ALUMINUM-CONTAINING OXIDE AND PROCESS FOR PRODUCING ALUMINUM-CONTAINING OXIDE
ALUMINUM-COOPER ALLOY
ALUMINUM-COPPER ALLOY
ALUMINUM-COPPER BOND PAD DESIGN AND METHOD OF FABRICATION
ALUMINUM-COPPER-MAGNESIUM-MANGANESE ALLOY USEFUL FOR AIRCRAFT APPLICATIONS
ALUMINUM-DOPED ZIRCONIUM DIELECTRIC FILM TRANSISTOR STRUCTURE AND DEPOSITION METHOD FOR SAME
ALUMINUM-FERRICYANIDE BATTERY
ALUMINUM-FILLED SELF-ALIGNED TRENCH FOR STACKED CAPACITOR STRUCTURE AND METHODS
ALUMINUM-FREE VERTICAL CAVITY SURFACE EMITTING LASER (VCSELS)
ALUMINUM-FREE VERTICAL CAVITY SURFACE EMITTING LASERS (VCSELS)
ALUMINUM-GERMANIUM ALLOYS FOR VLSI METALLIZATION
ALUMINUM-KILLED LOW CARBON STEEL SHEET FOR CONTAINERS AND METHOD OF MAKING
ALUMINUM-KILLED LOW-CARBON STEEL SHEET FOR CONTAINERS AND METHOD FOR ITS PREPARATION
ALUMINUM-KILLED MEDIUM-CARBON STEEL SHEET FOR CONTAINERS
ALUMINUM-KILLED MEDIUM-CARBON STEEL SHEET FOR CONTAINERS AND PROCESS FOR ITS PREPARATION
ALUMINUM-LITHIUM ALLOY
ALUMINUM-LITHIUM ALLOY ARTICLE
ALUMINUM-LITHIUM ALLOYS
ALUMINUM-LITHIUM ALLOYS HAVING HIGH ZINC
ALUMINUM-LITHIUM ALLOYS SUITABLE FOR FORGINGS
ALUMINUM-LITHIUM FILLER ALLOY FOR BRAZING
ALUMINUM-LITHIUM WELDING ALLOYS
ALUMINUM-LITHIUM, ALUMINUM-MAGNESIUM AND MAGNESIUM-LITHIUM ALLOYS OF HIGH TOUGHNESS
ALUMINUM-LITHIUM, ALUMINUM-MAGNESIUM AND MAGNESUIM-LITHIUM ALLOYS OF HIGH TOUGHNESS
ALUMINUM-LITHIUM-MAGNESIUM FILLER ALLOY FOR BRAZING
ALUMINUM-MADE HEAT EXCHANGER WITH BRAZED JOINT PORTION
ALUMINUM-MAGNESIUM ALLOY PLATE OR EXTRUSION
ALUMINUM-MAGNESIUM ALLOYS HAVING HIGH TOUGHNESS
ALUMINUM-MAGNESIUM-SCANDIUM ALLOYS WITH ZINC AND COPPER
ALUMINUM-MASKED AND RADIANTLY-ANNEALED GROUP II-IV DIFFUSED REGION
ALUMINUM-NITRIDE SINTERED BODY, METHOD FOR FABRICATING THE SAME, AND SEMICONDUCTOR SUBSTRATE COMPRISING THE SAME
ALUMINUM-OXY COMPOUND, CATALYST COMPONENT FOR POLYMERIZING OLEFIN, AND METHOD FOR PRODUCING POLYOLEFIN
ALUMINUM-PALLADIUM ALLOY FOR INITIATION OF ELECTROLESS PLATING
ALUMINUM-PHOSPHINIMINE COMPLEXES AS CATALYSTS FOR THE (CO)POLYMERIZATION OF ETHYLENE
ALUMINUM-SCANDIUM ALLOYS
ALUMINUM-SILICON ALLOY FOILS
ALUMINUM-SILICON ALLOY FOR HIGH TEMPERATURE CAST COMPONENTS
ALUMINUM-SILICON ALLOY FORMED FROM A METAL POWDER
ALUMINUM-SILICON ALLOY HAVING IMPROVED PROPERTIES AT ELEVATED TEMPERATURES AND ARTICLES CAST THEREFROM
ALUMINUM-SILICON ALLOY HAVING IMPROVED PROPERTIES AT ELEVATED TEMPERATURES AND PROCESS FOR PRODUCING CAST ARTICLES THEREFROM
ALUMINUM-SILICON ALLOY SHEET FOR USE IN MECHANICAL, AIRCRAFT AND SPACECRAFT CONSTRUCTION
ALUMINUM-SILICON CARBIDE COMPOSITE AND PROCESS FOR MAKING THE SAME
ALUMINUM-STABILIZED SUPERCONDUCTING WIRE
ALUMINUM-STABILIZED SUPERCONDUCTOR AND SUPERCONDUCTING COIL, AND METHOD OF MANUFACTURING THE SUPERCONDUCTOR
ALUMINUM-THERMOPLASTIC PANEL AND METHOD OF MANUFACTURE
ALUMINUM-TITANIUM ALLOY
ALUMINUM-TITANIUM ALLOY WITH HIGH SPECULAR REFLECTIVITY, REFLECTING COATINGS COMPRISING SAME AND MIRRORS AND PARTS COMPRISING SAID COATING
ALUMINUM-ZIRCONIUM ANTIPERSPIRANT SALTS MADE WITH ZIRCONIUM SALTS HAVING LOW ZR:CL RATIO
ALUMINUM-ZIRCONIUM ANTIPERSPIRANT SALTS WITH HIGH PEAK 5 AL CONTENT
ALUMOXANE-ENHANCED, SUPPORTED ZIEGLER-NATTA CATALYSTS, METHODS OF MAKING SAME, PROCESSES OF USING SAME AND POLYMERS PRODUCED THEREFROM
ALUMOXANE-ENHANCED, SUPPORTED ZIEGLER-NATTA POLYMERIZATION CATALYSTS, METHODS OF MAKING SAME, PROCESSES OF USING SAME AND POLYMERS PRODUCED THEREFROM
ALUMOXANES, CATALYSTS UTILIZING ALUMOXANES AND POLYMERS THEREFROM
ALVAC CANARYPOX VIRUS RECOMBINANTS COMPRISING HETERLOGOUS INSERTS
ALVAC POXVIRUS-RABIES COMPOSITIONS AND COMBINATION COMPOSITIONS AND USES
ALVEOLAR BONE MEASUREMENT SYSTEM
ALVEOLAR BREATH COLLECTION DEVICE AND METHOD
ALVEOLAR CONNECTOR COMPRISING AT LEAST ONE CONNECTION DEVICE FOR FIBER OPTICS
ALVEOLAR MATERIALS THAT CONTAIN AT LEAST ONE THERMOPLASTIC POLYMER, AT LEAST ONE MODIFIED EPOXIDE RESIN AND AT LEAST ONE PORE-FORMING AGENT
ALVEOLAR SURFACTANT PROTEINS HAVING CYS TO SER MUTATIONS
ALVEOLATE CONTAINER FOR EXPLOSIVE PRIMERS
ALWAYS NORMAL BOW SIGHT
ALWAYS-DETERMINISTIC PHASE-LOCKED LOOP
ALWAYS-VISIBLE WINDOW CLASS WITH OVERLAP PREVENTION
ALZHEIMER MODEL FOR DRUG SCREENING
ALZHEIMER'S DISEASE SECRETASE, APP SUBSTRATES THEREFOR, AND USES THEREFOR
ALZHEIMER'S DISEASE SECRETASE, APP SUBSTRATES THEREFOR, AND USES THEREOF
ALZHEIMER'S DISEASE TREATMENT WITH TACRINE METABOLITES
ALZHEIMER'S RELATED PROTEINS AND METHODS OF USE
ALZHEIMER'S TESTER |
|
Inventions Browse
Copyright © Philip M. Parker, INSEAD. Terms of Use.